聚氨酯胶粘剂在苯板夹心板生产中的应用

简要介绍了聚氨酯胶粘剂在彩钢板／聚苯乙烯夹心板生产中的应用、采用双组分无溶剂发泡型聚氨酯胶粘剂生产夹心板的工艺。对胶粘剂配制中原料的选择和工艺参数的确定进行了讨论。采用由聚醚、水、催化剂等配成的混合物为A组分，多异氰酸酯作为B组分，制成的发泡型聚氨酯胶粘剂具有固化速度快、成本低、实用效果好等优点，滴胶和抹胶的施工方法工艺简单，可满足夹心板生产的需要。     

A Combined Antenna Array and Multi-User Detection DS-CDMA Receiver in Single-Path and Multi-Path Fading Channels

An adaptive antenna array is incorporated into a decorrelatingmulti-user detector to effectively increase the DS-CDMA system capacity.Capacity improvement is due to beamforming gain, spatial diversity gain(assuming large angle spread), and the decorrelating effect. Thereceiver has been analyzed for the cases of sufficiently andinsufficiently spaced receiving antennas. The receiver consists of afront-end beamformer for every user in the cell and has knowledge of allusers' signature sequences. The beamformer estimates the desired userchannel vector, enhancing its signal and reducing the co-channelinterference from other directions. The multi-user detection, exploitingknowledge of other users, rejects those interferers whose arrival anglesare close to that of the desired user. The average uncoded Bit ErrorRate (BER) as a function of the number of in-beam active users, theaverage antenna Signal-to-Noise Ratio (SNR), and the number of receivingantennas is examined in both single-path and multi-path Rayleigh fadingchannels. Analysis shows an increase in system capacity proportional tothe number of receiving antennas.     

一种新颖的表面等离子谐振效应光波导水质传感技术

光学表面等离子谐振（ＳＰＲ）效应是一种很有效的水质检测技术，经过详细的理论推导，同了ＳＰＲ反射光强的普遍适用公式。在纯水与受污染水两种情况下，根据一些已知参数计算出结果。由计算结果数据一出的曲线比较表明，ＳＰＲ效应在两种情况下有明显差别，这也正是ＳＰＲ效应用于水质检测的理论根据。     

Outlier-resistant methods for estimation and model fitting

Least squares is perhaps the most widely used technique for model fitting. In this article, we illustrate the poor performance of least squares when there are spurious values, or outliers, in a sequence of measurements. A brief overview of three well-known classes of robust alternatives to the least-squares mean is presented. For robust regression, a recent proposal called least median squares (LMS) is decribed. LMS regression is compared to least-squares regression in an example involving the estimation of optical fiber geometry. References are provided for software that is available for robust estimation techniques surveyed in this article.     

A Neural Network Approach for Signal Detection in Digital Communications

In this paper, we propose a new approach for signal detection in wireless digital communications based on the neural network with transient chaos and time-varying gain (NNTCTG), and give a concrete model of the signal detector after appropriate transformations and mappings. It is well known that the problem of the maximum likelihood signal detection can be described as a complex optimization problem that has so many local optima that conventional Hopfield-type neural networks fail to solve. By refraining from the serious local optima problem of Hopfield-type neural networks, the NNTCTG makes use of the time-varying parameters of the recurrent neural network to control the evolving behavior of the network so that the network undergoes the transition from chaotic behavior to gradient convergence. It has richer and more flexible dynamics rather than conventional neural networks only with point attractors, so that it can be expected to have much ability to search for globally optimal or near-optimal solutions. After going through a transiently inverse-bifurcation process, the NNTCTG can approach the global optimum or the neighborhood of global optimum of our problem. Simulation experiments have been performed to show the effectiveness and validation of the proposed neural network based method for the signal detection in digital communications.     

COLLISION DETECTION AMONG MOVING OBJECTSIN MACHINING PROCESS SIMULATION

ＣＯＬＬＩＳＩＯＮＤＥＴＥＣＴＩＯＮＡＭＯＮＧＭＯＶＩＮＧＯＢＪＥＣＴＳＩＮＭＡＣＨＩＮＩＮＧＰＲＯＣＥＳＳＳＩＭＵＬＡＴＩＯＮＹａｎｇＨｅｍｉｎｇ；ＬｕＡｎｓｈｅｎｇ；ＺｈｏｕＪｉＣＯＬＬＩＳＩＯＮＤＥＴＥＣＴＩＯＮＡＭＯＮＧＭＯＶＩＮＧＯＢＪＥＣ...     

西气东输管道工程《管道对接环焊缝全自动超声波检测》标准及与国外先进标准的对比

介绍了西气东输管道工程《管道对接环焊缝全自动超声波检测》标准的技术特点、主要内容,并对本标准与国外先进标准、国外先进企业标准进行了较详细的对比分析。本标准在检测工艺方面与ASTM E1961-98相近。验收部分是从缺欠的位置、缺欠自身高度和长度来加以限制,较为合理,具有科学性,与EN25817-92和ISO5817-92标准相当,比API1104-99标准偏严,与西气东输工程射线检测企业标准也基本相当。     

悬停直升机的雷达探测技术

首先对直升机旋翼的雷达回波进行建模与分析,在此基础上分析了雷达探测悬停直升机的可能性,提出了一种适用于所有直升机类型的多扫描周期积累检测系统方案,讨论了可能影响其检测性能的因素.     

多载波CDMA系统中联合检测译码方法研究

为了提高多载波CDMA(MC-CDMA)系统的抗干扰能力与系统容量,提出了一种将信道参数检测与纠错码译码联合运算进行的方法,得到了一种反馈级联结构.在分析MC-CDMA系统接收性能时,通常假设信道参数能精确估计,但对于时变信道在实现上是困难的;根据本文提出的级联结构,先用导频符号进行信道参数估计,再用导频符号的译码信息作为导频符号进行信道参数的进一步优化,构成一种联合检测译码结构,能有效地降低导频符号数量,并提高了信道参数估计精度.通过仿真,与传统的方法进行了性能比较,联合检测译码方案能获得较大系统增益,是一种优化方案.