利用Hilbert-Huang变换提取地震信号瞬时参数

 通过Hilbert变换求取的信号瞬时参数并非对任何信号都有物理意义，此法通常要求被分析信号是窄带或平稳的，而且对噪声很敏感。而实际地震信号既非平稳又含有噪声，若在实际应用中不加考虑地对地震信号进行Hilbert变换以求取瞬时参数，这种情况下求取的瞬时参数将缺乏物理意义甚至失真。Hilbert-Huang变换是一种新的分析非平稳非线性信号的方法，它先将信号进行经验模态分解（EMD），形成有限个固有模态函数（IMF）之和，再对固有模态函数作Hilbert变换求取时频谱，求取的时频谱在时域和频域都具有较高的分辨率。本文将Hilbert-Huang变换应用于地震瞬时参数的提取，实例表明，对地震剖面做EMD可以得到不同时间尺度上的特征，Hilbert谱比传统的时频谱在时间和频率域上的分辨率都要高，强反射层在第1阶IMF瞬时频率剖面上比原瞬时频率剖面上表现得更为明显。     

Hardware and software architecture for power quality analysis

This paper presents a novel concept for power quality hardware and software architecture. Software tools related to detection, classification and characterization of power quality events can be integrated into a Distribution Control Center in which the interconnection between different subsystems is being carried out through the Internet allowing flexibility to the system. This system is implemented using wavelet analysis applied in all proposed algorithms. Different power quality events are taken as examples to illustrate the capabilities of the proposed method. The obtained results reveal that the proposed architecture is feasible to be implemented as an integral part of a control center system.The proposed system has the property of fast and accurate detection and classification of any power quality disturbance event and introduces a new PQ index determination that allows characterizing any type of disturbance including the non-periodic signals.     

基于纠错编码和小波变换的数字图像水印算法

文章提出了一种基于小波变换和纠错编码的数字图像水印算法,该算法不需要利用原始图像。实验结果表明,该算法较好地保持了图像的质量,并大大提高了检测的可靠性,对常见的图像处理方法显示了较强的鲁棒性。     

炼油化工装置技术改造的决策与实施

针对炼油和石化工业装置技术改造的特点，系统地总结了技术改造的类型和改造方案的制定、决策及实施的原则、程序和方法，指出对炼化装置实施技术改造是一项极其复杂、极具难度的系统工程，必须结合实际情况，以投资回报最大化为原则，通过深入细致地研究和反复比选优化改造方案，并结合现场情况制定切实、可靠、安全的实施方案。     

位置控制器与通用变频器APC系统

在每一周期的开始时的速度值V1预设定到传动装置上进行速度预控制，同时，反馈回来的实际值Sj与S1进行比较计算，得出当时偏差值△S，此偏差值△S乘以比例系数Ksp，得到Vk叠加在Vt上，得出传动装置应具有的速度控制信号V，然后V经速度／电压变换和D／A转换向传动系统的速度控制发出控制信号Uα控制执行机构的定位。调节Ksp的值使系统无超调无振荡。     

具有迭代结构的时频分布计算方法

本文讨论了时频分布中的迭代算法的问题.通过选择特殊的计算窗口,时频分布的迭代运算形式能够有效地利用前面数据段的分析结果,从而避免了重复性的运算,使得计算效率得到提高.本文对原有的利用单边窗口的时频分布迭代算法的性能进行了分析,提出了采用对称型窗口的迭代计算形式.与单边窗口相比,双边形式的计算窗口不但可以有效地提高时频表示精度,同时还能够更为准确的表示信号的瞬时频率.文章对各项理论分析结果提供了相应的仿真实验结果.     

分数阶傅立叶变换的多种定义形式及其光学实现系统分析

分数阶傅立叶变换是经典傅立叶变换的广义形式,它同时从时间域和频率域(或空间域)揭示信号特征。本文系统地分析了分数阶傅立叶变换三种定义形式及其所对应的光学实现系统的组成和原理,说明了光学信息处理系统实现分数阶傅立叶变换的有效性.     

一种空间自适应小波门限去噪算法

提出了一种空间自适应小波门限去噪算法,该算法在小波域对含噪小波系数做两次自适应去噪,两次自适应门限分别基于最大似然(ML)方差估计和最大后验概率(MAP)方差估计.仿真结果表明,该算法与其它自适应门限去噪算法相比,去噪后的图象具有更高的峰值信噪比(PSNR).     

Linked influence of pH and cations on fatty-acid monolayer integrity related to high-quality Langmuir-Blodgett films

This study shows the connection between the morphological structure of transferred films and the chemical composition of the monolayer before transfer. The stability of a behenic acid monolayer depends on the linked influence of the type of cation and of the pH value in the aqueous subphase. The stability of the monolayer is assessed by the expansion of the solid-packed state and by the relaxation time. Its integrity is characterized by the number of crystal defects which appear in transferred Langmuir-Blodgett (LB) films as seen through Nomarski microscope observations. Both stability and integrity are greatly improved when Cd²⁺ or Mn²⁺are added to the subphase at pH 5.75 and 6 respectively. In these conditions, the transfer is very efficient and the LB films thus obtained are of very high quality. The pH values of the subphase at which the molecules of behenic acid are transformed into bivalent salts differ significantly according to the nature of the cation involved. Comparing infrared spectra of the LB films, it appeared that the relative amount of acid/salt found in the monolayer was practically the same with a subphase containing either Cd²⁺ at pH 5.75 or Mn²⁺ at pH 6. This suggests that the ratio of acidic and salt forms would be a key parameter for obtaining high-quality LB films.     

Perceptual primitives from an extended 4D Hough transform

Directional features extracted from Gabor wavelets responses were used to train a structure of self-organising maps, thus classifying each pixel in the image within a neuron-map. Resulting directional primitives were grouped into perceptual primitives introducing an extended 4D Hough transform to group pixels with similar directional features. These can then be used as perceptual primitives to detect salient structures. The proposed method has independently fixed parameters that do not need to be tuned for different kind or quality of images. We present results in application to noisy FLIR images and show that line primitives for complex structures, such as bridges, or simple structures, such as runways, can be found by this approach. We compare and demonstrate the quality of our results with those obtained through a parameter-dependent traditional Canny edge detector and Hough line finding process.