陶瓷行业推行ISO14000探析

大力推行ISO14000系列标准已成为我国陶瓷企业适应加入WTO后新的竞争形式，参与国际绿色贸易的有力武器。本文根据我国陶瓷企业的现状，分析了在陶瓷行业推行ISO14000系列标准工作中所存在的问题，提出了在我国陶瓷行业广泛推行ISO14000系列标准的对策和建议。     

硫酸铵-氯化亚锡-孔雀绿体系浮选分离铂

研究了在盐酸介质中硫酸铵存在下氯化亚锡—孔雀绿—水体系浮选分离铂的方法。在最佳实验条件下，铂的浮选率可达100．0％，并与常见贱金属完全分离。     

Gloss Properties and Surface Morphology Relationships of Fruits

Eggplants exhibited a higher average gloss reading (15.3 Gloss Units (GU)) than mature green tomatoes (12.0 GU) and apples (8.2 GU) using a flat surface glossmeter. The same trend was observed using a novel curved surface glossmeter. Scanning electron micrographs revealed that epicuticular wax covering eggplants had a smoother structure than that of tomatoes and apples, providing a more effective light scattering surface. Wax removal resulted in decreases in gloss, with average readings of 9.5, 7.4 and 6.3 GU for eggplants, tomatoes and apples, respectively. These results indicate the extent to which wax may influence shininess, although roughness measurements of flattened peel after wax removal suggest that surface topography also influences gloss.     

新型蓝绿发光材料ZnSe／BeTe超晶格的能带剪裁

由于器件的快速退化，101.5小时似乎成了Znse基蓝绿色半导体激光器难于逾越的寿命极限。分析退化机制，发现在强电流注入的半导体激光器中，热退化具有重要影响。研究表明，用作载流子限制层的宽带Ⅱ-Ⅵ族四元合金（如ZnMgSSe）只能对ZnSe中的电子有效地限制，无法对空穴很好地限制;而对BeTe，却只能对空穴进行有效的限制，无法对电子很好地限制。这导致ZnSe（或BeTe）活性层空穴（或电子）漏电发热，引起退化。本文提出以ZnSe／BeTe超晶格为蓝绿发光层，并用包络函数理论具体计算了阱宽、垒宽对载流子能级的不同影响，考察了ZnSe、BeTe厚度比和超晶格周期对带隙、载流子限制能力的调节。为研制新型长寿命蓝绿色半导体激光器提供了一条新的途径。     

Effect of Forming Pressure on the Internal Structure of Alumina Green Bodies Examined with Immersion Liquid Technique

Green bodies prepared by compaction of alumina granules were made transparent by an immersion liquid technique, and the internal structure was characterized with an optical microscope to study the effect of forming pressure on the internal structure. Clear images obtained by the technique provide more detailed information than other existing methods for structures ranging from one to tens of micrometers. Intergranular pores were present between unfractured granules. Their sizes and concentration tended to decrease with increasing forming pressure. However, pores were clearly present even in the green body prepared at 600 MPa. A rod- and needlelike feature was also found and was concluded to correspond to a high-density region. The significance of large pores and high-density regions on processing as well as the details of the technique is discussed.     

用业务流程再造思想设计采购业务流程

业务流程再造的核心思想是对企业的组织结构和工作方法进行“彻底地、根本性”重新设计,它对于打造企业核心竞争力具有重要的战略意义。本文结合株洲齿轮有限责任公司的实际,对企业采购业务流程的现状、思路和具体做法进行了分析研究。     

二极管泵浦内腔倍频激光技术研究进展

评述了二极管泵浦内腔倍频激光技术的发展现状，对解决中小功率下‘绿光问题’的理论及实验方案进行了比较分析，对高功率内腔倍频系统亦进行了初步探讨。     

我国煤炭生产的环境问题及其对策研究

论文分析了我国煤炭生产中所存在的环境问题 ,并提出采取应用全面绿色管理、贯彻实施ISO14 0 0 0系列标准及推广应用清洁生产等对应措施和方法。其中全面绿色管理是作者首次提出的全新概念。     

转变观念是润滑技术现代化的必要途径

探讨了国内润滑工作存在的问题，分析了近20年来润滑技术的发展状况，介绍了国内先进单位合理用油取得的效益和经验，提出用油现代化的看法。     

钢材的制造加工与环境保护

钢铁产品在生产、加工过程产生废水、废气、废渣，对环境产生污染。应在保护环境的基础上发展生产，走绿色工业的道路。