Electrochemical copolymerization of aniline with m-aminophenol and novel electrical properties of the copolymer in the wide pH range

A copolymer, poly(aniline-co-m-aminophenol), has been synthesized using repeated potential cycling. The monomer concentration ratio, acid concentration and applied potential strongly affect the copolymerization rate and the properties of the copolymer. The optimum conditions for the copolymerization are that the scan potential range is controlled between −0.10 and 0.95 V (vs.SCE), and a solution consists of 0.34 M aniline, 0.012 M m-aminophenol and 2 M H₂SO₄. The IR spectra of the copolymers demonstrate that the m-aminophenol units are included in the copolymer chains. The cyclic voltammograms of the copolymers in 0.3 M Na₂SO₄ solution with various pH values were performed at the potential ranges from −0.20 to 0.80 V and at a scan rate of 60 mV s⁻¹. The results indicate that the copolymer still hold 41.7% of the electrochemical activity when the copolymer electrode was transferred from a solution of pH 5.0 to a solution of pH 11.0 in the potential range of −0.20 to 0.80 V. An impedance plot of the copolymer in a solution with pH 12.0 and at 0.40 V is constructed of a semicircle and a Warburg line with a slope of 1. This means that the electrode reaction of the copolymer at pH 12.0 is also under mass transfer control. The conductivity of the copolymer prepared under the optimum conditions is 1.42 S cm⁻¹, and slightly depends on the pH value. Thus, the pH dependence of the electrical properties of the copolymer is improved compared with poly(aniline-co-o-aminophenol), and is much better than that of the parent polyaniline.     

基于ARM的三相电表设计

介绍一种以ARM为核心控制处理器的三相智能电表的软、硬件设计。电表集电量参数监测计量与显示为一体,其中电量参数计量设计实现采用专用的测量芯片CS5463。结果表明,所设计电表具有集成度高、功能强、成本低、抗干扰能力强、功耗低等优点,能够满足电能智能化管理的要求。电表通过MAX485芯片与主控制器通信,完成数据远传,最终实现电量数据采集与实时监测等功能,具有很好的应用前景。     

Anaerobic fermentation of xylose by pichia stipitis: The effect of forced cycling of ph

Xylose fermentation by Pichia stipitis was examined using a two-stage batch process. The cells were first grown aerobically on D-xylose (5 g/L), whereafter additional xylose (10 g/L) was added and fermented during anaerobic conditions (T=30°C). The optimum pH value for a fermentation with constant pH was found to be 4.5 (maximum specific ethanol production rate 0.21 g/(g h). Forced square wave cycling of the pH between 4 and 5, and 3.5 and 5.5 (cycle time 30 min) during the fermentation stage resulted in a fermentation rate lower than the maximum rate, but with unchanged ethanol yields.     

Preparation of pH‐sensitive poly(vinyl alcohol‐g‐methacrylic acid) and poly(vinyl alcohol‐g‐acrylic acid) hydrogels by gamma ray irradiation and their insulin release behavior

A series of pH‐responsive hydrogels were studied as potential drug carriers for the protection of insulin from the acidic environment of the stomach before releasing in the small intestine. Hydrogels based on poly(vinyl alcohol) networks grafted with acrylic acid or methacrylic acid were prepared by a two‐step process. Poly(vinyl alcohol) hydrogels were prepared by gamma ray irradiation (50 kGy) and then followed by grafting either acrylic acid or methacrylic acid onto these poly(vinyl alcohol) hydrogels with subsequent irradiation (5–20 kGy). These graft hydrogels showed pH‐sensitive swelling behavior and were used as carriers for the controlled release of insulin. The in vitro release of insulin was observed for the insulin‐loaded hydrogels in a simulated intestinal fluid (pH 6.8) but not in a simulated gastric fluid (pH 1.2). The release behavior of insulin in vivo in a rat model confirmed the effectiveness of the oral delivery of insulin to control the level of glucose. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 636–643, 2004     

pH玻璃电极的现状与发展

对pH玻璃电极的结构、原理以及特性进行了综述.与液体充填式玻璃电极比较,固体接触式pH玻璃电极有明显的优点.叙述了固体接触式pH玻璃电极膜的成分及其响应机理,并指出固体接触式pH玻璃电极的发展方向.     

Kinetic investigation of the chlorine reduction reaction on electrochemically oxidised ruthenium

The rate and mechanism of the electroreduction of chlorine on electrooxidised ruthenium has been investigated with focus on the effect of solution pH. Current/potential curves for the reduction process in solutions with constant chloride concentration of 1.0 mol dm⁻³ and varying H⁺ concentration have been obtained with the use of the rotating disk electrode technique (RDE). It was found that the chlorine reduction rate is highly inhibited in solutions with high H⁺ concentrations and that it can be satisfactorily described by the Erenburg mechanism, previously suggested for the chlorine evolution on RuO₂ and RTO. The expression of the kinetic current as a function of chlorine and H⁺ concentration was obtained by solving the elementary rate equations of the kinetic mechanism. The kinetic constants obtained from the correlation of the kinetic current expression to the experimental data were used to simulate the dependence of the surface coverages and elementary reaction rates on overpotential.     

垂直管中油,气,水三相流总流量测量模型研究

基于集流型涡轮流量计与放射性低能源密度—持水率计在大庆生产测井研究所油、气、水三相流动环路中的实验响应结果，首先考察了用于气液两相流中涡轮流量计的Ａｙａ物理模型，进而提出了经过校正后用于确定油、气、水三相流总流量的测量模型，用此模型预测三相流总流量与流动环标定数据对比后其误差小于５％，满足了石油工业应用要求     

过氧化氢处理河流着生刚毛藻的效果研究

以深圳市某河流为研究对象,分析了投加H2O2对刚毛藻生物量的控制效果及其对水体p H、溶解氧、氨氮和总磷的影响。结果表明:H2O2≥1.25 mol/L时能有效抑制刚毛藻生长,使藻类光合活性在10 min内从5.8降低到0,叶绿素浓度在30 min内从5.8 mg/L降低至0.2 mg/L。现场试验投加H2O2处理河流水体中刚毛藻14 d内,藻类生物量、光合活性和叶绿素浓度降幅均高于90%。加药1 h后,河流p H值由原来的9.21~9.74迅速降低至8.23~8.80,14 d内保持在9以下。河流溶解氧、氨氮、总磷和H2O2残留浓度在除藻过程中存在变化,但是1 d后会迅速恢复至加药前水平。投加H2O2是一种有效、无污染的应急去除河流着生刚毛藻的方法。     

Mechanistic investigation of hydrogen-enhanced anodic dissolution of X-70 pipe steel and its implication on near-neutral pH SCC of pipelines

The effects of hydrogen-charging on anodic dissolution of pipe steel under near-neutral pH condition were studied by electrochemical techniques. Hydrogen-charging enhances the anodic dissolution rate of the steel. The hydrogen-enhanced dissolution increases with increasing charging current density. The hydrogen effect is attributed to the alteration of chemical potential and exchange current density of steel. Hydrogen-charging affects the corrosion process of the steel. In particular, at a high charging current density, a layer of corrosion product forms on the electrode surface to change corrosion potential and interfacial double-charge layer capacitance as well as charge-transfer resistance. The hydrogen effect factor for enhanced anodic dissolution of steel at an anodic potential of −0.4 V (SCE) is 1.53 only. Hydrogen-enhanced anodic dissolution of steel by itself may not be the major factor contributing to the high rate of crack growth in pipe steel in near-neutral pH electrolyte. A further investigation of the synergistic effect of hydrogen and stress on dissolution at the crack-tip is essential to determine the mechanism of near-neutral pH stress corrosion cracking of pipelines.     

Promass质量流量计在重油系统中的应用

介绍德国E＋H公司Promass流量计的结构和工作原理，该流量计以Coriolis力为基础，对流体的质量流量和密度进行测量，从而避免了般体积流量计测量结果受温度影响较大的缺点，分析了Pomass流量计用于重油测量时的影响因素及防范措施。