全自动双色注射模设计

介绍了全自动双色注射模具的技术要求和模具结构设计及动作流程 ,以实例分析了全自动双色注射模具的动作顺序     

A novel binder and binder extraction method for powder injection molding of tungsten cemented carbide

1　INTRODUCTIONPowderinjectionmolding (PIM ) ,whichisde rivedfromplasticinjectionmolding ,isakindofnet shapepowdermetallurgyformingprocess[13] .Com bininghigh partcomplexitywithhigh productionquantities ,itsupplementstheestablishedprocesseslikediecompaction ,machiningandinvestmentcasting[4 6 ] .Comparingtoconventionalpressing/sinteringprocess,thePIMhasgreattechniqueandcostadvantagesforthepro ductionofcementedcarbidecomponentswithcomplexshapes[7,8] .Sincehydraulicpressureisappliedduringi…     

斜齿轮塑件注射模的脱模机构设计

分析了塑料斜齿轮的传动优点和工艺特点，介绍了斜齿轮塑件注射成型模具的齿形型腔旋转式和斜齿轮塑件旋转式两类脱模机构设计。     

硬质合金注射工艺参数的研究

对WC-8Co硬质合金的注射工艺进行了研究。通过对注射坯的外观检测和密度分析,考察了注射温度、注射压力、保压压力这几个主要参数对注射过程中缺陷的影响,并优化出注射工艺参数。     

冰箱抽屉注射成形的CAE优化

应用三维流动模拟软件HSCAE3D对冰箱抽屉的注射模具结构及工艺进行优化。通过几种方案的分析比较，获得了较满意的成形效果。     

两种简化的侧凹抽芯机构

对于制品的内侧凹 ,在采用滑块、斜摆杆等一般抽芯机构较难实现时 ,通过改变抽芯机构的动作和复位形式 ,设计出两种简化的侧凹抽芯机构 ,并且制造方便,缩短了加工周期 ,实践证明该机构可有效地完成抽芯动作。     

带环形内侧凹塑件注射模设计

根据带环形内侧凹塑件的结构特点 ,讨论了成型时塑件可采取的脱模方式 ,分析了采用顺序脱模机构时型芯的分割方法及型芯的运动过程 ,探讨了不同结构的塑件在脱模时采用的抽芯机构 ,设计出2种模具结构并指出设计时的注意事项。     

Mechanical properties and microstructure of Ti-6Al-4V compacts by metal injection molding

Ti-6Al-4V compacts were fabricated by metal injection molding(MIM). Influence of vacuum sintering time on mechanical properties and microstructure of the sintered compacts at 1 260 ℃ were investigated. The experimental results show that the compacts sintered at 1 260 ℃ for 3 -6 h, which was made from hydrogenation-dehydrogenation(HDH) powder(average particles size is 45 μm), have a relative density of 95.6%- 96.7%, ultimate tensile strength of 648 - 686MPa and 0.2% yield strength of 526 - 615MPa; but a lower elongation(＜4%) and that the compacts sintered at 1 260 ℃ for 2 - 6 h, which was made from 90% gas-atomized powder(average particles size is 32.5 μm) and 10 % HDH powder, have higher relative density(＞95 %), ultimate tensile strength of 800 -848MPa,0.2% yield strength of 712 - 762MPa and high elongation (7.4%- 9.5%). When the sintering time is increased,porosity decreases and microstructure of sintered products changes from equiaxed to typical Widmanstatten, the average sizes of prior β grains, α colonies and α phase thickness in the β grains increase accordingly. After HIP treatment,pores obviously become less, microstructure of alloy is refined and mechanical properties are greatly improved.     

注射制品收缩规律的模拟实验研究

在全面分析了注射制品成型收缩研究方法及特点的基础上,应用软件模拟实验方法,对不同材料的同一塑件,在相同工艺参数及固定浇口尺寸与位置条件下,进行了不同结构特征变化时塑件成型收缩的模拟实验研究,并给出了模拟实验曲线。结果表明,塑件结构特征对其成型收缩具有明显的影响,结构特征距塑件整体几何中心越远,收缩值越大。     

限幅绝缘盖板注塑模设计

通过对限幅绝缘盖板的工艺分析,确定了开放型腔、滑块脱模的模具结构.此模具构思巧妙,结构简单,不但成功地解决了塑件成型、侧孔贯通、顺利脱模的问题,而且大大降低了模具成本,缩短了研制周期.