添加剂强化重油催化裂化的过程分析与应用

运用工程化学原理分析讨论了添加剂强化重油催化裂化的过程，包括分散稳定气泡、改善雾化、保护酸中心、抑制焦炭生成以及提高重油气化率的胶体结构改性、降低表面张力和改善微孔润湿，并用以指导强化重油催化裂化添加剂的筛选。建立小型固定流化床催化裂化实验装置评价了添加剂的强化效果。结果表明，添加剂强化重油催化裂化可降低催化剂生焦1．0％左右，提高总液体收率1．0％～2．8％。     

茨21-133井CO2吞吐技术初步试验

茨榆坨油田茨13块原油属于普通稠油，1993年开始蒸汽吞吐采油，从第二轮开始效果明显变差，注汽返排率低，有效周期短，产量下降快，套管变形井增多。针对这些问题，在该区块茨21—133井进行CO2吞吐采油工艺现场试验，获得成功，增油效果明显。     

DSP技术在液压混合动力汽车能源控制方面的应用

文章分析了液压混合动力汽车的发展趋势,简述数字信号处理器(DSP)作为控制器的优势和DSP作为控制器对并联式混合动力液压车的能源控制的工作原理,给出了能源控制系统DSP信号流程图和主程序流程图。测试结果表明,DSP能源控制系统能够比较精确的对液压混合动力车的能量消耗与分配进行控制,具有很好的应用前景。     

新型动态汽车衡称重系统的设计与实现

针对目前现有动态汽车衡称重误差大等问题，提出了一种新型动态汽车衡称重系统的实现方法，该称重系统在基于Intel x86硬件平台和linux操作系统的基础上设计实现的。同时分析了产生称重误差的根本原因。采用了数字信号处理手段来提高动态汽车衡的称重精度。现场测试数据分析表明，该新型动态汽车衡称重系统技术指标优于国家动态衡标准。     

TbFe磁性薄膜的磁力显微镜成像研究

利用磁力显微镜（MFM）对TbFe磁性薄膜进行了不同抬举距离（分别为60～780nm）的磁力成像研究．在实验中，比较了低抬举距离（100nm以下）磁力像中样品-针尖的互相干扰；同时发现在高抬举距离磁力像中，随着抬举距离的增大，出现了与高凸起形貌对应的图像衬度特征，并随抬举距离的变化也改变着位置与强度，一直到抬举距离为仪器的极限值780nm时，形貌干扰仍未消失，对其形成机制进行了分析．     

Design of nonlinear controllers for active vehicle suspension with state constraints

Design of active vehicle suspension has tradeoffs between three main performance metrics (passenger comfort, suspension deflection and road holding ability). It has been known that each performance can be achieved by H _∞ controller and they can be gathered by LPV (Linear Parameter Varying) method. However, because the suspension deflection limit was not explicitly considered, this limit may be exceeded. In this paper, the authors propose a “reference shaping“ based method in order to improve the control performance. In this approach, a “virtual reference” signal is imposed to the system such that the suspension deflection is kept small. The effectiveness of the approach is examined by numerical simulations. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

核磁共振测井在桩1区块底水稠油油藏开发中的应用

针对桩1区块特高含水期底水稠油油藏的开发特点,利用核磁共振测井资料定量评价其孔隙流体流动特性,准确划分产层,直接识别油、水层,准确地评价了区块剩余油分布情况.依此部署了水平井,取得了很好的开发效果.实践证明,核磁共振测井具备常规测井所不具备的某些技术优势,能解决一些特殊的地质问题,有广泛的应用前景.     

仿西班牙横移车断齿事故分析及改进

某炼钢厂仿西班牙产品制造的板坯横移车运行机构采用分别驱动、变频调速、无人操纵自动控制技术。其减速器齿轮多次发生点蚀、塑性变形、断齿等事故或故障 ,严重时曾出现轮齿全部被剃光的现象。经分析 ,其根本原因是承载能力不足。通过重新选型设计 ,加大减速器中心距 ,彻底根除了断齿等事故隐患     

文东油田连续气举优化配气数学模型建立及应用

针对连续气举在开发过程中出现的注入气利用效率低、综合效益差的问题，建立了供气能力有限时的优化配气数学模型，给出了解析法求解过程。文东油田现场试验表明，应用该技术可以实现连续气举井的合理配气，并提高油井产量，适合在油田推广应用。     

Biosorption of heavy metals by Saccharomyces cerevisiae: Effects of nutrient conditions

Studies took place to investigate the effects of different nutrient conditions on the biosorption ability and selectivity of heavy metals by Saccharomyces cerevisiae. After having grown in media supplemented with additional glucose, ammonium, phosphate or cysteine, the yeast was exposed to an equimolar solution of lead, cadmium, zinc and copper. Lead removal from a mixed solution was significantly higher than that of copper, followed by zinc and cadmium. Generally, yeasts from cysteine-rich media showed greatest sorption capacity whereas phosphate addition influenced zinc selectivity. In addition, glucose, fructose and sucrose as carbon sources were examined. Cultures grown in glucose had a better uptake than those cultivated with fructose at an incubation time of 30 min.