Bright Aggregation‐Induced Emission Dots for Dynamic Tracking and Grading of Patient‐Derived Xenografts in Zebrafish

Cancer prognosis will benefit from a scoring system that could grade malignant traits of patient‐derived cells by assessing their growth and metastasis in a living system. Specific tracking of patient‐derived cells requires labeling by contrast agents with good signal‐to‐noise ratio and no specific stain of host tissues. Towards this aim, aggregation‐induced emission (AIE) dots are developed for in vivo cancer tracking with emphasis on reproducible optimized formulation and specific fluorescent labeling of cells that enable enhanced spatial temporal resolution in vivo. The importance of energy‐dependent AIE dots uptake for patient‐derived cell labeling is emphasized to reveal their specific uptake by viable cancer cells. Using optically transparent zebrafish embryo, the ability is demonstrated to follow the engraftment of transplanted AIE dot labeled cells in zebrafish brains over one week. Cells detected outside the brain after 7 d are quantified as metastatic cells. Results from seven clinical samples demonstrate the utility of this methodology to differentiate low engraftment level of benign neoplasms from higher engraftment level and metastasis detected in malignant ovarian cancer specimens. Achieving clinically validated results supports the use of AIE dot labeled patient derived cells in zebrafish xenografts for future cancer prognosis.     

Sub‐5 nm Dendrimer Directed Self‐Assembly with Large‐Area Uniform Alignment by Graphoepitaxy

Directed self‐assembly (DSA) using soft materials is an important method for producing periodic nanostructures because it is a simple, cost‐effective process for fabricating high‐resolution patterns. Most of the previously reported DSA methods exploit the self‐assembly of block copolymers, which generates a wide range of nanostructures. In this study, cylinders obtained from supramolecular dendrimer films with a high resolution (<5 nm) exhibit planar ordering over a macroscopic area via guiding topographical templates with a high aspect ratio (>10) and high spatial resolution (≈20 nm) of guiding line patterns. Theoretical and experimental studies reveal that this property is related to geometrical anchoring on the meniscus region and physical surface anchoring on the sidewall. Furthermore, this DSA of dendrimer cylinders is demonstrated by the non‐regular geometry of the patterned template. The macroscopic planar alignment of the dendrimer nanostructure reveals an extremely small feature size (≈4.7 nm) on the wafer scale (>16 cm²). This study is expected to open avenues for the production of a large family of supramolecular dendrimers with different phases and feature dimensions oriented by the DSA approach.     

Stimuli‐Responsive DNA‐Gated Nanoscale Porous Carbon Derived from ZIF‐8

Stimuli‐responsive nanoscale porous carbon derived from ZIF‐8 (NCZIF) gated by DNA capping units is reported. The NCZIF is first obtained by calcination of nano‐ZIF‐8 crystals under an inert atmosphere. It is further conjugated with amine‐modified single‐stranded DNA after carboxylation (DNA/NCZIF). The guest molecules are sealed in the pore of NCZIF by the formation of a DNA duplex structure on the surface of NCZIF. As proof of principle, two systems that can be, respectively, used for controlled drug delivery and biosensing are introduced. In the first system, the drug model (rhodamine 6G, Rh6G) is locked in the NCZIF by the DNA capping units composed of rich‐G sequences and its complementary DNA strand. The in vitro cellular experiments reveal that DNA/NCZIF has good biocompatibility and can controllably release Rh6G upon the K⁺‐stimuli in cells. In the second system, the signal probe (methylene blue, MB) is locked in the NCZIF and then released after the unlocking of the pores triggered by the dissociation of the aptamer‐hybrid capping units. The MB‐loaded DNA/NCZIF can linearly respond to target molecules in the range from 1 × 10^?9 to 10 × 10^?6 m and has good specificity.     

Helical‐Like 3D Ultrathin Piezoelectric Element for Complicated Ultrasonic Field

The developments of personalized medicine, ultrasound imaging, and contactless “microscopic handle” techniques are pushing ultrasonic transducers toward features of high frequency, device miniaturization, and even novel function. However, the conventional ultrasonic transducer has severely limited the development of novel ideas for applications due to its ordinary ultrasonic field. Although transducer arrays and monolithic acoustic holograms are capable of producing the complicated ultrasonic field, it is still difficult to achieve high frequency, device miniaturization, and novel function simultaneously. Here, a simple but effective approach is introduced that aims at reconstructing the complicated and high‐frequency ultrasonic field via a compact single‐element ultrasonic transducer. The 3D ultrathin piezoelectric element with a complex configuration is demonstrated theoretically and experimentally to produce the desired complicated ultrasonic field. With helical‐like configuration, the single‐element ultrasonic transducer offers efficient noncontact trapping and manipulation of suspended microparticles and biological cells. Moreover, its strong trapping capability leads to the 3D stacking of microparticles, which is a novel and interesting phenomenon achieved by a single‐element ultrasonic transducer. This work brings the possibility of a complicated ultrasonic field for achieving novel high‐frequency ultrasound applications through the design of smart structure ultrathin piezoelectric materials.     

Improved Thermoelectric Performance of Eco‐Friendly β‐FeSi2–SiGe Nanocomposite via Synergistic Hierarchical Structuring,Phase Percolation,and Selective Doping

A β‐FeSi₂–SiGe nanocomposite is synthesized via a react/transform spark plasma sintering technique, in which eutectoid phase transformation, Ge alloying, selective doping, and sintering are completed in a single process, resulting in a greatly reduced process time and thermal budget. Hierarchical structuring of the SiGe secondary phase to achieve coexistence of a percolated network with isolated nanoscale inclusions effectively decouples the thermal and electrical transport. Combined with selective doping that reduces conduction band offsets, the percolation strategy produces overall electron mobilities 30 times higher than those of similar materials produced using typical powder‐processing routes. As a result, a maximum thermoelectric figure of merit ZT of ≈0.7 at 700 °C is achieved in the β‐FeSi₂–SiGe nanocomposite.     

Heterojunction Architecture of N‐Doped WO3 Nanobundles with Ce2S3 Nanodots Hybridized on a Carbon Textile Enables a Highly Efficient Flexible Photocatalyst

The availability of robust, versatile, and efficient photocatalysts is the main bottleneck in practical applications of photocatalytic degradation of organic pollutants. Herein, N‐WO₃/Ce₂S₃ nanotube bundles (NBs) are synthesized and successfully immobilized on a carbon textile, resulting in a flexible and conducting photocatalyst. Due to the large interfacial area between N‐WO₃ and Ce₂S₃, the interwoven 3D carbon architecture and, more importantly, the establishment of a heterojunction between N‐WO₃ and Ce₂S₃, the resultant photocatalyst exhibits excellent light absorption capacity and superior ability to separate photoinduced electron–hole pairs for the photocatalytic degradation of organic compounds in air and water media. Theoretical calculations confirm that the strong electronic interaction between N‐WO₃ and Ce₂S₃ can be beneficial to the enhancement of the charge carrier transfer dynamics of the as‐prepared photocatalyst. This work provides a new protocol for constructing efficient flexible photocatalysts for application in environmental remediation.     

Semiconducting Nanocomposite with AIEgen‐Triggered Enhanced Photoluminescence and Photodegradation for Dual‐Modality Tumor Imaging and Therapy

Semiconducting polymer nanoparticles (SPNs) have potential in biological applications. While some SPNs have significant photothermal conversion efficiencies (PCEs) as photothermal and photoacoustic agents, other SPNs offer high fluorescence yields as photoluminescent agents. However, the energy balance distribution in SPNs inhibits their successful applications in photoluminescence/photoacoustic (PL/PA) dual‐modality imaging. Additionally, the ultrastability of SPNs in vivo may cause damage to organisms. This work reports nanocomposite semiconducting polymer and tetraphenylethene nanoparticles (STNPs) constructed by semiconducting polymers (SPs) and tetraphenylethene aggregation‐induced emission luminogens (TPE AIEgens). The SP SPC10 endows good photothermal conversion ability, and the AIEgen TPBM supports enhanced photoluminescence of the STNPs. The results show that the STNPs can act as PL/PA dual‐modality imaging agents. The signal‐to‐noise (S/N) ratio in the PL modality reaches 8.7, and the imaging depth in the PA modality is 5.8 mm. The SPC10 in the STNPs can be decomposed under 90 mW cm^?2 white light irradiation in 6 h without any other additional agents. Furthermore, the STNPs are sufficient for the treatment of xenograft 4T1 tumor‐bearing mice based on photothermal therapy. The nanocomposite STNPs achieve optimized dual‐modality PL/PA imaging and the AIEgen‐triggered in situ photodegradation of SPNs. These properties indicate the significant potential of STNPs in clinical diagnosis and noninvasive therapy.     

Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Cored Hole Transport Material Enabling Over 21% Efficiency Dopant‐Free Perovskite Solar Cells

Dopant‐free hole transport materials (HTMs) are essential for commercialization of perovskite solar cells (PSCs). However, power conversion efficiencies (PCEs) of the state‐of‐the‐art PSCs with small molecule dopant‐free HTMs are below 20%. Herein, a simple dithieno[3,2‐b:2′,3′‐d]pyrrol‐cored small molecule, DTP‐C6Th, is reported as a promising dopant‐free HTM. Compared with commonly used spiro‐OMeTAD, DTP‐C6Th exhibits a similar energy level, a better hole mobility of 4.18 × 10^?4 cm² V^?1 s^?1, and more efficient hole extraction, enabling efficient and stable PSCs with a dopant‐free HTM. With the addition of an ultrathin poly(methyl methacrylate) passivation layer and properly tuning the composition of the perovskite absorber layer, a champion PCE of 21.04% is achieved, which is the highest value for small molecule dopant‐free HTM based PSCs to date. Additionally, PSCs using the DTP‐C6Th HTM exhibit significantly improved long‐term stability compared with the conventional cells with the metal additive doped spiro‐OMeTAD HTM. Therefore, this work provides a new candidate and effective device engineering strategy for achieving high PCEs with dopant‐free HTMs.     

Solution‐Processable,High‐Performance Flexible Electroluminescent Devices Based on High‐k Nanodielectrics

Flexible alternating‐current electroluminescent (ACEL) devices have attracted considerable attention for their ability to produce uniform light emission under bent conditions and have enormous potential for applications in back lighting panels, decorative lighting in automobiles, and panel displays. Nevertheless, flexible ACEL devices generally require a high operating bias, which precludes their implementation in low power devices. Herein, solution‐processed La‐doped barium titanate (BTO:La) nanocuboids (≈150 nm) are presented as high dielectric constant (high‐k) nanodielectrics, which can enhance the dielectric constant of an ACEL device from 2.6 to 21 (at 1 kHz), enabling the fabrication of high‐performance flexible ACEL devices with a lower operating voltage as well as higher brightness (≈57.54 cd m^?2 at 240 V, 1 kHz) than devices using undoped BTO nanodielectrics (≈14.3 cd m^?2 at 240 V, 1 kHz). Furthermore, a uniform brightness across the whole panel surface of the flexible ACEL devices and excellent device reliability are achieved via the use of uniform networks of crossaligned silver nanowires as highly conductive and flexible electrodes. The results offer experimental validation of high‐brightness flexible ACELs using solution‐processed BTO:La nanodielectrics, which constitutes an important milestone toward the implementation of high‐k nanodielectrics in flexible displays.     

High Areal Capacitance of N‐Doped Graphene Synthesized by Arc Discharge

The lack of cost effective, industrial‐scale production methods hinders the widespread applications of graphene materials. In spite of its applicability in the mass production of graphene flakes, arc discharge has not received considerable attention because of its inability to control the synthesis and heteroatom doping. In this study, a facile approach is proposed for improving doping efficiency in N‐doped graphene synthesis through arc discharge by utilizing anodic carbon fillers. Compared to the N‐doped graphene (1–1.5% N) synthesized via the arc process according to previous literature, the resulting graphene flakes show a remarkably increased doping level (≈3.5% N) with noticeable graphitic N enrichment, which is rarely achieved by the conventional process, while simultaneously retaining high turbostratic crystallinity. The electrolyte ion storage of synthesized materials is examined in which synthesized N‐doped graphene material exhibits a remarkable area normalized capacitance of 63 µF cm^?2. The surprisingly high areal capacitance, which is superior to that of most carbon materials, is attributed to the synergistic effect of extrinsic pseudocapacitance, high crystallinity, and abundance of exposed graphene edges. These results highlight the great potentials of N‐doped graphene flakes produced by arc discharge in graphene‐based supercapacitors, along with well‐studied active exfoliated graphene and reduced graphene oxide.