Determination of tetrachloroethylene—Results of a collaborative study and the standardized method

The development, by collaborative study, of a standardized method for the determination of tetrachloroethylene in olive oils is described. The results of the study, which was carried out in 1989 under the direction of the International Olive Oil Council (IOOC), are presented and show that tetrachloroethylene can be readily determined, to an acceptable degree of precision, by gas-liquid chromatography with electron capture detection. A limited number of results obtained for the determination of trichloroethylene and chloroform by the same method indicate that a similar precision could be obtained with the method when determining these solvents also.     

高效液相色谱法测定焦性没食子酸

在大量焦性没食子酸（９９％）存在下，采用甲醇－二甲基甲酰胺－磷酸－水为流动相和Ｍｉｃｒｏｓｏｒｂ—ＭＶＴＭＣ１８色谱柱，能很好地将没食子酸以及其它酚类杂质与其分离。该方法测定焦性没食子酸简便、准确，已应用于工业生产。     

区域烧结法制备高温气体清洁用大尺寸陶瓷过滤管

用区域烧结在1 d内可完成高温气体清洁用1.5 m陶瓷过滤管的制备过程,区域烧结的优势是缩短研究和开发周期.目前,经过认真设计,已经完成区域烧结设备.多孔陶瓷件比致密陶瓷件更容易烧结成型,原因是多孔陶瓷在区域烧结期间可免除其收缩和变形.     

严重非均质油藏高渗条带的识别方法

胡状集油田属于严重非均质油藏,在注水开发后表现为油井见效快、含水上升快,并且很快在注采井间形成高渗条带,影响开发效果。如何对高渗条带识别,成为改善严重非均质油藏开发效果的关键。本文通过沉积微相法、测井评价方法、示踪剂监测分析法、动态分析法等多种方法,开展对高渗条带识别的研究,为下步措施安排提供了可靠的调整依据。     

复合高稳定性固态二氧化氯释放剂的研究

目前中国市场上固态二氧化氯释放剂技术不成熟，产品多为二元包装或伪一元包装，给使用和储存带来很多不便。为解决这个问题，采取亚氯酸钠为释放剂主成分，辅以复合无机盐活化剂，借助小丸包衣技术，制备了一元化、高纯、高稳定性固态二氧化氯释放剂。     

一种耐超高温、耐酸聚合物的制备及性能测试

摘要：为解决常规聚合物无法满足超高温深井酸化压裂的技术要求，本文分别以丙烯酰胺（AM） 甲基丙烯酰氧乙基三甲基氯化铵（DMC）、AM DMC SMA（十八烷基甲基丙烯酸酯）为原料，通过自由基聚合制备出两种耐酸聚合物SY-1和SY-2，并对其结构进行表征及性能测试。结果表明：SY-2红外谱图中720 cm-1为—(CH2)n—的弯曲振动吸收峰，单体成功接枝到聚丙烯酰胺分子链上；热重分析表明，SY-1升温至600℃失重比为98%，SY-2失重比86%，热稳定性得到改善；质量分数为20%盐酸中，SY-2质量分数0.8%：180℃，170s-1流变性能测试，SY-2剪切终点黏度56mPa?s，90℃、120℃、150℃剪切1h，黏度为83.6mPa?s、43.5mPa?s、27.8mPa?s，剪切稳定性分别为85.66%、74.45%、52.01%； 180℃、3MPa条件下，静态酸岩反应速率为8.94?10-5(g/cm2?s)，较常规SY-1反应速率1.69?10-4(g/cm2?s)减小一个量级。且与缓蚀剂、铁离子稳定剂配伍性良好，克服高温酸化压裂技术的应用瓶颈。     

超高分子相对质量部分水解聚丙烯酰胺合成研究

选择AM均聚后水解工艺路线,采用新型复配引发体系,合成作为油田驱油剂的超高相对分子质量聚丙烯酰胺(简称PAM).在所选高效的引发体系下,考察了主要聚合反应因素对产品平均分子相对质量的影响,确定了聚合工艺条件溶液的pH值为11～11.5,W(单体)为45%,W(引发剂)为70×10-6,W(链转移剂)为1.3×10-6.在优化的聚合条件下,合成了相对分子质量高达25×106,水解度在20%～30%可调,过滤比小于1.3的聚丙烯酰胺.     

高沸点溶剂法合成原乙酸三甲酯

对低沸点溶剂法制备原乙酸三甲酯工艺进行了改进，比较了煤油、2-乙基己醇、氯苯、异佛尔酮、邻苯二甲酸二丁酯、乙二醇二丁醚等高沸点溶剂对反应的影响，筛选出最优高沸点溶剂煤油：研究了新反应体系的醇解pH值、溶剂的循环使用次数对反应的影响及溶剂循环损耗率，结果表明，醇解的最佳pH值为5．6；随着溶剂循环次数增加，原乙酸三甲酯收率从83．6％(1次)逐渐下降到76．7％(16次)；溶剂次平均损耗率4．6％。实现了直接蒸馏产品，溶剂循环使用的新工艺。避免了旧工艺先蒸溶剂，后蒸产品，产品大量分解，收率低等缺点。     

High solids content emulsions. III. Synthesis of concentrated latices by classic emulsion polymerization

Two different methods of producing bi‐ and trimodal latices of a mixture of methyl methacrylate, butyl acrylate, and small amounts of acrylic acid were tested. It is shown that a combination of concentrating blends of seed particles by semibatch reaction, followed by a nucleation of small particles plus a second semibatch phase allowed us to obtain stable latices with solids contents over 65% and viscosities of below 2500 mPa s^?1 with little coagulum formation. The key parameter in determining latex stability, coagulum formation, and viscosity appears to be the the particle size distribution, and especially its modification attributed to secondary nucleation. Because it is not possible to eliminate water‐soluble monomers from the polymerization recipe, secondary (homogeneous) nucleation must be minimized by careful addition of the free‐radical initiator and choice of monomer feed flow rates. The nucleation of the third population in the trimodal latices is best accomplished with a mixed surfactant system because renucleation by anionic surfactant alone leads to detrimental changes in the particle size distribution (PSD) resulting from excessive flocculation of particles. In addition, it was found that the viscosity of the final products was not sensitive to small changes in the ionic strength of the latex, although neutralization to a pH of 6 effectively doubles the final latex viscosity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1916–1934, 2002; DOI 10.1002/app.10513     

High Density Culture of Porphyridium cruentum in a 42 L Internal Airlift Loop Photobioreactor

1 INTRODUCTION Porphyridium cruentum is a kind of unicellular microalgae, which can live widely in freshwater, marine, brackish, and soil environment[1]. Great attention has been paid to its potential economic value such as the high content of essential high unsaturated fatty acids, especially arachidonic acid (AA) and eicosapentaenoic acid (EPA) (ca 50% in the total fatty acids), ploysaccharides, and synthetic pigments, especially phycoerythrin (PE)[2,3]. During cultivation, the cells…