Evaluation of different coating systems by electrochemical methods

Corrosion protection of organic coated steel is determined by free corrosion potential measurements and impedance spectroscopy. The results are classified by means of very basic considerations and evaluation figures are developed. These electrochemical data are correlated with the extent of the corrosion for each coating system. The evaluation figures are used for ranking coating systems and this ranking is correlated with the ranking with reference to the results of standardized and exposure tests.     

计算机在电阻炉设计中的应用

本文介绍了286/386型个人计算机在电阻炉计算机辅助设计中的应用,包括整体思路,数学模型的建立方法。还以连续式电阻炉为例编制了设计软件,详细介绍了该软件的功能和使用方法。本文提出的计算机辅助设计方法亦适用于其它工业电炉。     

一个高电阻值测量电路

介绍一种新的高阻测试方法，可满足对高达１×１０＾１６Ω的测试要求。测试结果显示，对于１×１０＾１３Ω重复误差优于±２％。高阻测试电路通过接口与６８０９微机配套使用，操作简便，读数直观，便于长时间重复测量。     

W—311^#耐腐蚀SMC树脂的开发研究

本文介绍了Ｗ－３１１＾＃ＳＭＣ不饱和聚酯树脂的研制及制品耐水、耐腐蚀性能。实际应用表明，该树脂适合ＳＭＣ成型工艺要求，为优良的耐腐蚀ＳＭＣ树脂。     

Ohmic contact and transport properties of II–VI Green/Blue laser diodes

The employment of the Zn(Se,Te) pseudo-graded contacting scheme to p-type ZnSe-based alloys contributes directly to the recent demonstration of room temperature continuous-wave operation of II– VI green-blue laser diodes. Contact ohmicity is maintained down to cryogenic temperatures which enabled the investigation of electrical transport properties associated with the p-type nitrogen-doped ZnSe, Zn(S,Se), and (Zn,Mg)(S,Se). The observation of both persistent photoconductivity and a metastable population of holes which are in thermodynamic equilibrium with hydrogenic acceptors having reduced activation energy suggests the presence of a DX-like behavior for holes in p-type (Zn,Mg)(S,Se).     

ANALYSIS OF EXPERIMENTAL AND NUMERICAL RESULTS OF A TURBULENT SWIRLING FLOW IN A TUBE

In many applications swirling flow is used to enhance heat and mass transfer. One of the problems of modelling a turbulent swirling flow is the choice of the turbulent closure model which is acceptable for engineering purposes. To evaluate which model performs best, numerical results are compared with experimental data. Local velocity measurements are carried out on a swirling flow in a circular tube. The measurement method is hot-wire anemometry combined with visualization techniques. The numerical analysis is carried out using the k-ε model and the Algebraic Stress Model. In the experiment a symmetrical swirl was observed, Comparing the experimental data with the numerical results shows that the Algebraic Stress Model represents the experimental data quite well, whereas the k-ε model fails.     

Comparison of interfaces in Ti composites reinforced with uncoated and TiB2/C-coated SiC fibres

Interfaces play an important role in determining the mechanical properties of composite materials. The interfaces established between a titanium-alloy matrix (Ti-6Al-4V) and uncoated and TiB₂/C-coated SiC fibres are analysed by scanning electron microscopy, transmission electron microscopy and X-ray techniques. Emphasis is placed upon the interfacial morphology and microstructure, identification of reaction products, and the stability of the coating layer. Complex multi-reaction layers are observed frequently in the interfacial zones. Previous, often contradictory, reports about the interlayers are reviewed. Experimental observation demonstrates that the type and distribution of interlayers vary in a given system, due to prolonged treatment of the samples at temperature. The formation and distribution of the interlayers are discussed further, with respect to these and previous findings. Methods of reducing interfacial reactivity are discussed.     

针对语音变换的语音篡改检测

针对使用语音变换技术的语音篡改,提出一种自动检测方法。在分析语音变换基本模型和变换语音失真的基础上,提取语音信号的声道参数以及相关的信号统计量,并通过支持向量机递归特征消除法,选择出对语音变换比较敏感的特征作为分类特征,使用支持向量机进行语音变换检测和变换语音的说话人性别判别。对于一种语音变换软件的实验结果表明,该方法具有较高的检测准确率,其中语音变换检测的平均准确率为94.90%,变换语音的说话人性别判别平均准确率为92.09%。