基于J2EE的多媒体设备管理系统的设计与实现

该文介绍了多媒体设备管理系统的设计与实现,阐述了J2EE开发该系统的关键技术,重点说明了该系统的功能与特点。     

C/S与P2P模式在信息资源共享中的比较

本文在对C/S与P2P网络计算模式优劣分析的基础上,对其在网络信息与资源共享、信息交互与信息搜索方面进行了对比分析.     

锰红柱石中Mn~（3＋）谱的分析

本文利用锰红柱石的吸收光谱,考虑到锰红柱石中Ｍｎ３＋处于一种Ｃ２ｖ（Ｃ２＇＇）的低对称晶位,采用一简化的强场方案,把单电子晶场矩阵元用自旋允许吸收带代替,克服了多参数的困难．计算出了锰红柱石中处于八面体配位的Ｍｎ３＋的电子能谱,对锰红柱石的分析首次获得了较为理想的理论计算结果,并对Ｍｎ３＋和Ｆｅ３＋谱带的识别提出了新的看法．     

Mechanical activation-assisted electro-thermal explosion synthesis of the Ti2AlC phase

This study deals with the synthesis of the Ti₂AlC phase using the Electro-Thermal Explosion under Pressure with Confinement (ETEPC) technique. The effects of the ETEPC technique and the milling process parameters on the TiC_x phase content and the formation mechanism of the Ti₂AlC phase were investigated. The latter is mainly affected by the morphology of the powder mixture and aluminum melted amount. The optimization of the above parameters allowed the achievement of the desired reaction, leading to the formation of the Ti₂AlC phase with a purity of about 97?wt%. The results clearly demonstrate that the ETEPC process enables one to control both time and material synthesis temperature.     

纳米Fe_2O_3作为润滑油添加剂的摩擦磨损性能

采用烧结方法制备得到纳米α-Fe_2O_3,利用X射线衍射仪(XRD)和透射电镜(TEM)对样品进行了表征,研究了纳米α-Fe_2O_3作为液体石蜡添加剂的摩擦磨损性能。结果表明,添加纳米添加剂后,润滑油摩擦系数改变不明显,但磨损率显著降低。磨损率与纳米α-Fe_2O_3添加剂的表面积和添加量密切相关,当纳米材料的表面积为47m~2/g时磨损率最低,磨损率值降低为3.78×10~(-15) m~2/g;添加量为1.0wt%,润滑油磨损率最低。     

基于SSH架构的高职院校成绩管理系统的分析和设计

本文介绍了当前基于Struts2、Spring、Hibernate框架的高职院校成绩管理系统的分析和设计。     

Structural and properties of nanocrystalline WO3/TiO2-based humidity sensors elements prepared by high energy activation

Nanocrystalline WO₃/TiO₂-based powders have been prepared by the high energy activation method with WO₃ concentration ranging from 1 to 10 mol%. The samples were thermal treated in a microwave oven at 600 °C for 20 min and their structural and micro-structural characteristics were evaluated by X-ray diffraction, Raman spectroscopy, EXAFS measurements at the Ti K-edge, and transmission electron microscopy. Nitrogen adsorption isotherms and H₂ Temperature Programmed Reduction were also carried out for physical characterization. The crystallite and particle mean sizes ranged from 30 to 40 nm and from 100 to 190 nm, respectively. Good sensor response was obtained for samples with at least 5 mol% WO₃ activated for at least 80 min. Ceramics heat-treated in microwave oven for 20 min have shown similar sensor response as those prepared in conventional oven for 120 min, which is highly cost effective. These results indicate that WO₃/TiO₂ ceramics can be used as a humidity sensor element.     

基于J2EE技术的Web企业计算

由于现有Web技术难以解决信息经济的企业计算,本文探讨了使用J2EE核心技术实现Web下企业应用系统的要求,并结合一个现实系统的构造说明其具体实现。     

纳米SiO2材料的应用

本文根据纳米的奇异特性,简要综述纳米ＳｉＯ２在各个领域中的应用。