Step response classification for model-based autotuning via polygonal curve approximation

A model-based autotuning method consists of an identification and a regulator tuning phase. To achieve satisfactory performance and robustness, it is advisable that both phases be tailored a priori to the characteristics of the observed process dynamics. Such characteristics include, but are not limited to, the model structure. For example, overdamped and underdamped models with the same pole-zero structure are parametrised and controlled in different ways. Step response data, that are typically used for the identification phase in the autotuning context, can also be pre-processed to reveal those characteristics. This paper presents a step response classification method suitable for the above purpose. The method is based on a polygonal curve approximation technique for data pre-processing, followed by a neural network classifier. Only normalised I/O data are employed, so that the neural network can be trained off-line with simulated data. Simulation results are reported to show the effectiveness of the proposed classification method in terms of the achievable tuning results.     

Discrete-time adaptive sliding mode power system stabilizer with only input/output measurements

In this paper a discrete-time adaptive sliding mode control method is newly developed and applied to the power system stabilization problem. A controllable canonical form of state space realization is constructed using the parameters identified by the on-line recursive least squares method and the system state is estimated from the input/output measurements and the simple state transformations. The identified parameters and the estimated state are then used by the discrete-time sliding mode control, which is suitable for the digital equipment. The most important advantage of the proposed power system stabilizer (PSS) is that it is able to maintain its regulating performance with a slower sampling period than that of the conventional sliding mode PSS because it is developed in a pure discrete-time domain. Another advantage of the proposed PSS is that it needs neither a mathematical model of the power system nor the full-state measurements because they are identified through on-line identifications. Several computer simulations for the linear power system are performed to verify the performance of the proposed PSS. In the computer simulations for various circumstances which are probable in a power system are considered, such as transitions of the active and reactive powers, change of parameters of the synchronous machine, line-to-ground faults and measurement noise. As a result, a new power system stabilizer which can operate in a wide range of operating conditions and can overcome various disturbances and measurement noises is proposed.     

响洪甸电站引水隧洞进口水下岩塞爆破施工

响洪甸抽水蓄能电站水下岩塞爆破施工要求高,技术新,难度大.由于施工准备充分,并进行了一系列材料及施工试验,工程进展顺利,排孔造孔、导洞药室开挖、药管与起爆体加工、装药与堵塞、网络施工、充水补气等工程施工质量符合设计要求,岩塞爆破准时成功起爆.     

Parameter identification for nonlinear systems: Guaranteed confidence regions through LSCR

In this paper we consider the problem of constructing confidence regions for the parameters of nonlinear dynamical systems. The proposed method uses higher order statistics and extends the LSCR (leave-out sign-dominant correlation regions) algorithm for linear systems introduced in Campi and Weyer [2005, Guaranteed non-asymptotic confidence regions in system identification. Automatica 41(10), 1751-1764. Extended version available at 〈http://www.ing.unibs.it/∼campi〉]. The confidence regions contain the true parameter value with a guaranteed probability for any finite number of data points. Moreover, the confidence regions shrink around the true parameter value as the number of data points increases. The usefulness of the proposed approach is illustrated on some simple examples.     

水平井现场地质导向方法及其应用

为了降低水平井的钻探工程成本，要尽量不钻或少钻导眼井段。根据水平井在钻前准备、深度预测、稳定井斜、水平导入4个阶段的不同作业特点，依据现场施工经验，归纳提出了利用公式法、小导眼法、曲线指示法、扭矩与dc指数法等方法进行地质导向的成功实践。利用这些方法，可以有效地指导现场钻井人员，将钻井轨迹比较准确地导入目的层中。     

舰用燃气轮机框架模型的模态参数识别

本文采用一次有理正交多项式－多模态曲线合法对一舰用燃气轮机框架模型进行了实验模态分析，以Ｆｏｒｓｙｔｈｅ复合交多项式作为频响函数的理论值，用实测的频响函数建立系数矩阵，来寻找使目标函数最小的最优值，本文在ＨＰ９８２６微机上建立了建立了测试，数据采集及参数识别等系统识别软件，给出了具有工程实用意义的前五阶振动模态参数，识别结果和有限元计算相比较，令人满意。     

地层微电阻率成像测井在中原油田的应用

介绍地层微电阻率测井(FMI)技术以及它在地质构造解释、沉积学解释、裂缝识别、地层分析等方面独特的枝术优势,并详细介绍了FMI在中原油田濮深X井的实际应用,进行了应用效果分析,指出成像测井是未来油田油气勘探开发的重要技术手段。     

实时可视决策系统在渤海湾旅大油田开发中的应用

实时可视决策系统可以将接收到的现场数据实时传输到陆地，井眼轨迹和随钻测井资料可实时在三维地质油藏模型中显示，供钻完井和地质油藏专家综合分析、判断并及时下达指令指导现场施工。旅大油田运用实时可视决策系统成功钻成了6口水平井和4口水平分支井，实现了不钻领眼、井眼轨迹在最佳油层内成功着陆，并使水平井段尽可能沿着油层最佳位置钻进。例如在LD10—1-A25m水平分支井段的钻井过程中，利用实时可视决策系统，控制水平井眼轨迹在油层最佳位置钻进，获得了日产810M^3。的高产油气流。     

国内外小井眼钻井设备的发展

由于小井眼钻井成本低、排出岩屑体积小，对环境污染小，近几年来在世界范围内得到了大力发展，因此，各种小井眼钻井设备应运而生。介绍了目前国外小井眼钻井设备的发展状况及特点，提出了我国发展小井眼钻井设备的建议，并给出了一种小井眼钻机的初步方案。     

镀锡板生产线深基坑施工实践

采用钻孔灌注桩作为深地坑的围护结构，在坑内设排水沟、集水井排水。成功地在珠江三角洲地区狭窄场地进行地坑开挖，既保证了工程质量又有其特色。