消能锥形阀过流状态研究与优化

消能锥形阀是一种用于中、高水头下的消能控流阀门,其内部结构设计的好坏直接影响着控流效果。为探究消能锥形阀在不同开度下,过流流量及内部流场的变化情况。进行了模型试验与CFD数值模拟计算,试验中发现开度从100%关至85%时出现了流量反而上升、进口压力下降的情况。利用CFD数值模拟的方法对内部流场进行了可视化研究。研究结果表明,在全开状态下锥形阀内部存在以下问题:过强的局部高速高压区域、低速流动死区范围过大、涡流区过度影响高速过流部分。并对锥形阀进行了一定的结构改进,优化了其内部流场情况。     

PVC挤塑制品的着色

通过对PVC挤塑材料性能的分析，探讨了影响PVC挤塑制品着色的主要因素；从原材料及加工过程的特点，寻找控制着色产品色泽的主要因素；认为对材料的配方及配混工艺、挤塑加工工艺进行严格控制，是控制好PVC挤塑制品色泽的主要途径。     

Police officer in-vehicle discomfort: Appointments carriage method and vehicle seat features

Musculoskeletal pain is commonly reported by police officers. A potential cause of officer discomfort is a mismatch between vehicle seats and the method used for carrying appointments. Twenty-five police officers rated their discomfort while seated in: (1) a standard police vehicle seat, and (2) a vehicle seat custom-designed for police use. Discomfort was recorded in both seats while wearing police appointments on: (1) a traditional appointments belt, and (2) a load-bearing vest/belt combination (LBV). Sitting in the standard vehicle seat and carrying appointments on a traditional appointments belt were both associated with significantly elevated discomfort. Four vehicle seat features were most implicated as contributing to discomfort: back rest bolster prominence; lumbar region support; seat cushion width; and seat cushion bolster depth. Authorising the carriage of appointments using a LBV is a lower cost solution with potential to reduce officer discomfort. Furthermore, the introduction of custom-designed vehicle seats should be considered.     

Estimating oxygen consumption from heart rate using adaptive neuro-fuzzy inference system and analytical approaches

In new approaches based on adaptive neuro-fuzzy systems (ANFIS) and analytical method, heart rate (HR) measurements were used to estimate oxygen consumption (VO₂). Thirty-five participants performed Meyer and Flenghi's step-test (eight of which performed regeneration release work), during which heart rate and oxygen consumption were measured. Two individualized models and a General ANFIS model that does not require individual calibration were developed. Results indicated the superior precision achieved with individualized ANFIS modelling (RMSE = 1.0 and 2.8 ml/kg min in laboratory and field, respectively). The analytical model outperformed the traditional linear calibration and Flex-HR methods with field data. The General ANFIS model's estimates of VO₂ were not significantly different from actual field VO₂ measurements (RMSE = 3.5 ml/kg min). With its ease of use and low implementation cost, the General ANFIS model shows potential to replace any of the traditional individualized methods for VO₂ estimation from HR data collected in the field.     

On the robust control of stable minimum phase plants with large uncertainty in a time constant. A fractional-order control approach

This paper addresses the problem of designing controllers that are robust to a great uncertainty in a time constant of the plant. Plants must be represented by minimum phase rational transfer functions of an arbitrary order. The design specifications are: (1) a phase margin for the nominal plant, (2) a gain crossover frequency for the nominal plant, (3) zero steady state error to step commands, and (4) a constant phase margin for all the possible values of the time constant (T$T$): 0<T<∞$0<T<\infty$. We propose a theorem that defines the structure of the set of controllers that fulfil these specifications and show that it is necessary for these robust controllers to include a fractional-order PI$PI$ term. Examples are developed for both stable and unstable plants, and the results are compared with a standard PI$PI$ controller and a robust controller designed using the QFT$QFT$ methodology.     

天然中草药美白祛斑化妆品

根据色斑的形成机理，采用相应的天然草本植物提取物淡化色斑。根据细胞内黑色素形成机理，选用适当抑制剂。减少黑色素的过量生成，防止皮肤表皮的继续黑化，提出美白与祛斑化妆品的合理配制方法。     

溪源泄洪洞出口处闽江设计水位分析研究

溪源泄洪洞出口位于闽江之上,为分析泄洪洞出口处的设计水位,采用设计流量和水位流量关系推求法及实测水位资料推求法两种方法对工程设计水位进行计算,经过合理性分析,工程所在地近年水位变化剧烈,采用设计流量和水位流量关系推求法更符合现状情况,为工程建设提供可靠的设计成果。     

400kt／a硫酸高效电除雾器的设计参数与运行

介绍 4 0 0 kt/ a硫酸系统电除雾器总体结构及工艺设计参数 ,投入运行后 ,除雾效率低 ,介绍对存在问题的分析及解决过程 ,并介绍 2点成功经验     

聚丙烯管材加工性能研究

研究了无规共聚聚丙烯管材（PP－R）管材专用料的加工工艺，PP管材加工设备的选用及模具设计参数，并对PP－R管材焊接工艺进行了研究，结果表明，合适的加工工艺条件，成型设备及焊接工艺能够保证PP－R管材的质量。     

小型无人机C／G复合材料尾撑杆的研制

本文介绍了复合材料管件（无人机尾撑杆）的结构与铺层设计、基体树脂选择和成型工艺以及性能测试等内容。