碳化硅晶须增韧氧化铝复合材料制备中的几个问题

本文就ＳｉＣｗ－Ａｌ２Ｏ３复合材料制备的主要环节，介绍了国内外的最新研究动态，讨论了该研究领域存在的主要问题，提出了今后努力的方向。     

海藻酸钠/羟基磷灰石复合纤维的制备工艺

利用海藻酸钠和羟基磷灰石复合制备复合纤维,并采用正交试验和单因素分析方法研究海藻酸钠质量分数、第一凝固浴质量分数、第一凝固浴温度、纺丝头牵伸比和第二凝固浴组分等制备工艺对纤维断裂强度和镉离子吸附量的影响。综合考虑断裂强度和吸附性能的指标,确定了适宜的制备工艺:海藻酸钠质量分数为3%,第一凝固浴CaCl2质量分数为5%,第一凝固浴温度为15℃,纺丝头牵伸比为负牵伸,第二凝固浴组分为水溶液。     

新型基因枪微弹材料可行性初步研究-Ⅰ

基因枪在未来临床基因转导中很有前途,但目前所用微弹材料金、钨都属于重金属,其长期存在于人体的安全性尚无法估计。提出用羟基磷灰石(HAP)微粒来代替金或钨微粒,从理论上推导了这种取代的可行性,并报告了一种HAP微粒的制备及其负载DNA的研究结果。理论推导完全按照物理学方法进行。实验部分的方法:将稳定剂H以一定速度和比例滴入一定浓度的Ca(H2PO4)2溶液中,再按照一定的速度和比例滴入Ca(OH)2饱和溶液,期间或完成后超声处理一定时间,将所得HAP微粒溶液与亚精胺和DNA以一定比例和浓度在一定pH条件下混合。结论:所得HAP粒径值符合要求,并且能够高效负载DNA。     

Preparation of SnO2 whiskers via the decomposition of tin oxalate

A new method for preparing SnO₂ whiskers by the decomposition of SnC₂O₄ is suggested. A Whisker-like morphology of a SnC₂O₄ precipitate was attained via the gradual addition of an oxalic acid solution to a hot SnCl₂ aqueous solution (T > 50^∘C). In comparison, when the solution temperature was either lower than 50^∘C or when ethanol was used as the solvent, the SnC₂O₄ precipitate showed an angular and relatively isotropic morphology. The morphology of the SnC₂O₄ precipitate remained even after its thermal decomposition into SnO₂ at 400^∘C indicating that SnC₂O₄ precipitation is a key step in preparing the whiskers. The formation mechanism of SnO₂ whiskers was explained by the supersaturation during the precipitation of SnC₂O₄.     

The Effects of Dense/Nanometer Hydroxyapatite on Proliferation and Osteogenetic Differentiation of Periodontal Ligament Cells

The objective of this study is to investigate possible effects of nanometer powder of hydroxyapatite on proliferation of periodontal ligament cells. With sol-gel method, the nanometer hydroxyapatite powder were fabricated. The primary periodontal ligcament cells were caltured on dense particle hydroxyapatite and nanometer particle hydroxyapatite. The effects on proliferation of periodontal ligament cell were examined in vitro with MTT （ methyl thiazolil tetracolium） test. The intercellalar effects were observed with scanning electron microscopy and energy dispersive X-ray analyzer. In addition, the influence of two materials on osteogenetic differentiation was determined with measurement of ALP （ alkaline phosphatase ） activity. It is concluded that nanometer hydroxyapatite can promote proliferation and osteogenetic differeraiation of periodontal ligament cells and it may become absorbable agent in osseous restoration.     

Characterization of Hydroxyapatite Film on Titanium Substrate by Sputtering Technique

Radiofrequeut magnetron sputtering technique was used to produce calcium phosphate coated on the titurdum substrates, and the sputtered coating films were crystallized in an autoclave at 110℃ using a low temperature hydrothermal technique. The crystallization of as-sputtered coating film on the titanium substrates were amorphous calcium phosphate film. However, after the hydrothermal technique, calcium phosphate crystals grew and these were cohumnar crystal. The Ca/P ratio of sputtered coating films in 1.6 to 2.0.     

Plasma Sprayed Hydroxyapatite Coatings with Nano-hydroxyapatite Prepared by Ultrasonic Precipitation Process

1Introduction Bioceramicsarespeciallydesignedceramicsforthe repairandreconstructionofdamagedpartsofthehuman body.Applicationsincludereplacementsforhips,knees,teeth,etc.Hydroxyapatite(HA)issuchabioceramics material.HAisabioactivematerialwithacalcium to pho…     

Size Depending Separation of HAP:Eu Nanoparticles in Dispersed Sol

1Introduction Hydroxyapatite(Ca10(PO4)6(OH)2)isanimportant biomaterialthatiswidelyusedassubstituteorfillingma terialforscleroustissuesduetoitsgoodbiocompatibility andosteoconductivity[1,2].Inordertoinvestigatethein teractionsbetweenHAPnanoparticleswithana…     

氮化硅晶须的研究现状

介绍了晶须的生长机理、氮化硅晶须的制备方法以及影响其生长的因素。阐述了氮化硅晶须增强复合材料的现状,指出加强晶须的基础研究,改进制备技术和降低成本是今后的发展方向。     

正挤压对SiCw/6061Al晶须形貌的影响

为了研究正挤压加工对SiCw/6061Al复合材料晶须形貌的影响规律,通过改变挤压温度、挤压比等工艺条件正挤压成形了挤压铸造法制备的15vol.%SiCw/6061Al复合材料,利用SEM技术观察和分析了正挤压加工前后复合材料的微观组织形貌.研究表明:正挤压加工导致SiC晶须沿着复合材料的塑性流动方向呈现出一定程度的定向排列趋势,并伴随有比较明显的折断现象;挤压温度、挤压比等工艺参数都是影响SiC晶须形貌的主要因素.