Callindra haematocephata and Peltophorum pterocarpum flowers as natural sensitizers for TiO2 thin film based dye-sensitized solar cells

We have studied the performance of dye-sensitized solar cells employing natural dye extracted from the flowers Callindra haematocephata and Peltophorum pterocarpum as sensitizers for TiO₂ photoanode. The extracts have shown appreciable absorption in the visible region. FTIR studies indicated the presence of anthocyanins and β-carotene in the flowers of C. haematocephata and P. pterocarpum respectively. The extracts were anchored on TiO₂ film deposited on transparent conductive glass (FTO) which were used as photoanode. The dye coated TiO₂ film electrode, Pt counter electrode and electrolyte (I⁻₃) assembled into a cell module was illuminated by a light source with intensity 100 mW/cm² to measure the photoelectric conversion efficiency of the DSSCs. From the J-V characteristic curves of cells, the parameters related to the solar cell performance were determined. The conversion efficiency of the DSSC employing natural dye extract from the flower C. haematocephata and P. pterocarpumwere was found as 0.06% and 0.04%, with open-circuit voltage (V_OC) of 370 mV & 400 mV, short-circuit current density (J_SC) of 0.25 mA/cm² & 0.15 mA/cm², fill factor (FF) of 0.70 & 0.71 and P_max of 65 & 45 μW cm⁻² respectively. The extract of the flower C. haematocephata exhibited better photosensitization action compared to the flower of P. pterocarpum.     

Molecular dynamics simulations of Oxprenolol and Propranolol in a DPPC lipid bilayer

Extensive microscopic molecular dynamics simulations have been performed to study the effects of tow β-blocker drugs (Propranolol, Oxprenolol) on fully hydrated dipalmitoylphosphatidylcholine (DPPC) in the fluid phase at 323 K. Simulation of 4 systems containing varying concentrations of drugs was carried out. For the purpose of comparison, a fully hydrated DPPC bilayer without drugs was also studied at the same level of simulation technique which has been done on 4 other systems. The length of each simulation was 100 ns. The effects of concentrations of both drugs were analyzed on lipid bilayer properties, such as electrostatic potential, order parameter, diffusion coefficients, and hydrogen bond formation, etc. Penetration of water in the bilayer system was also investigated using radial distribution function analysis. Efficacy of varying concentrations of both drugs has no significant effect on P–N vector. Consistent with experimental results, by increasing the concentration of Propranolol, the thickness of the bilayer was increased.     

Cooperative effect of molecular orientation and β-form on toughening injection-molded isotactic polypropylene with β-nucleating agent

The toughness of conventional injection-molded isotactic polypropylene bars has been investigated with respect to the notch location and β-nucleating agent. Superior toughness is achieved in the β-nucleated bars with notches near the gate, but is absent in the near-gate bars without β-nucleating agent or in the β-nucleated ones far from the gate. With detailed structural analysis across the sample thickness, it is indicated that in these tough bars, extensive flow close to the surface suppresses the formation of β-form to a large extent but favors the generation of oriented α-form, whereas toward inner region, an opposite tendency is presented with the decay of flow strength and the activation of β-nucleating agent. Allowing that this peculiar hierarchical structure is absent in other two kinds of bars, it is deduced that the cooperative effect of molecular orientation of α-form in the skin layer and rich β-form in the inner region is responsible for the significant toughness enhancement in the β-nucleated bars near the gate. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Measurement of the amount and rate of methane dissolution in pure water and aqueous solution of SDS + multi-wall carbon nanotubes + β-cyclodextrin

In this paper, the impact of the mixture of sodium dodecyl sulfate (SDS) + multi-wall carbon nanotubes (MWCNTs) + β-cyclodextrin on the quantity and initial rate of methane dissolved in water is investigated. The experiments were performed at a temperature range of 278.15–303.15 K and an initial pressure of 0.5 MPa. The experimental results show that simultaneous utilization of β-cyclodextrin (0.01 mass fraction), MWCNTs (0.0005 mass fraction), and SDS (0.001 mass fraction) at 278.15 K increases the amount and the rate of methane dissolution in water by 29.90% and 173.78%, respectively, compared to pure water. An increase in the temperature decreases the quantity and the initial rate of methane dissolution in all solutions containing additives. However, no consistent relationship is observed between the temperature and the enhancement percentage of solubility of methane in solutions containing additives.     

Overview of the potent cyanobacterial neurotoxin β-methylamino-L-alanine (BMAA) and its analytical determination

Blue-green algae are responsible for the production of different types of toxins which can be neurotoxic, hepatotoxic, cytotoxic and dermatotoxic and that can affect both aquatic and terrestrial life. Since its discovery the neurotoxin β-methylamino-L-alanine (BMAA) has been a cause for concern, being associated with the neurodegenerative disease amyotrophic lateral sclerosis/Parkinsonism–dementia complex (ALS/PDC). The initial focus was on Guam where it was observed that a high number of people were affected by the ALS/PDC complex. Subsequently, researchers were surprised to find levels of BMAA in post mortem brains from Canadian patients who also suffered from ALS/PDC. Recent research demonstrates that BMAA has been found at different levels in the aquatic food web in the brackish waters of the Baltic Sea. There is emerging evidence to suggest that sand-borne algae from Qatar can also contain BMAA. Furthermore, there is now concern because BMAA has been found not only in warmer regions of the world but also in temperate regions like Europe. The aim of this review is to focus on the methods of extraction and analysis of the neurotoxic non-protein amino acid BMAA. We also consider the neurotoxicity, aetiology, and diverse sources and routes of exposure to BMAA. In recent years, different methods have been developed for the analysis of BMAA. Some of these use HPLC-FD, UPLC-UV, UPLC-MS and LC-MS/MS using samples that have been derivatised or underivatised. To date the LC-MS/MS approach is the most widely used analytical technique as it is the most selective and sensitive method for BMAA determination.     

Combining strategies to optimize a gel formulation containing miconazole: the influence of modified cyclodextrin on textural properties and drug release

Background: Miconazol, an antimycotic drug, is commonly formulated into semisolid formulations designed to be applied in the oral cavity to treat oral candidiasis. However, given its limited aqueous solubility, permeation through the biological membranes is low and therefore its activity is also limited. Cyclodextrins (CDs) have been widely used to increase the solubility and stability of poorly water-soluble drugs. Aim: The aim of this study is to formulate a gel containing an inclusion complex between a modified CD, methyl-β-cyclodextrin (MβCD), and miconazole (MCZ). The influence of the CD on the textural properties of the prepared gel and the drug release from formulation were evaluated. Methods: The gels were prepared using two polymers, Carbopol 71G and Pluronic F127, which were selected taking into account their bioadhesiveness and thermal-sensitive gelling properties, respectively. Texture profile analyses were performed at two different temperatures to ascertain the influence of the temperature on the gel texture properties. The in vitro MCZ release profiles from the prepared gel and the commercial gel formulations were evaluated and compared using modified Franz diffusion cells. Results: The addition of MβCD to the gel resulted in a decrease of the gel adhesiveness and firmness, and the MCZ release profile through f1 and f2 proved to be similar to the commercial product. Conclusions: A gel comprising miconazol in the form of an inclusion complex with MβCD showed suitable textural properties to be applied to the buccal mucosa. The MβCD enhanced the solubility of the MCZ in the gel formulation resulting in adequate in vitro drug release profiles.     

Anisotropic thermal expansion behaviors of copper matrix in β-eucryptite/copper composite

A β-eucryptite/copper composite was fabricated by spark plasma sintering process. The thermal expansion behaviors of Cu matrix of the composite were studied by in situ X-ray diffraction during heating process. The results show that Cu matrix exhibits anisotropic thermal expansion behaviors for different crystallographic directions, the expansion of Cu{1 1 1} plane is linear in the temperature range from 20 °C to 300 °C and the expansion of Cu{2 0 0} is nonlinear with a inflection at about 180 °C. The microstructures of Cu matrix before and after thermal expansion testing were investigated using transmission electronic microscope. The anisotropic thermal expansion behavior is related to the deformation twinning formed in the matrix during heating process. At the same time, the deformation twinning of Cu matrix makes the average coefficient of thermal expansion of the composite increase.     

β-甲基萘氧化合成维生素K3(1,4-甲萘醌)的研究进展

综述近年来国内外氧化合成1,4-甲萘醌(维生素K3)的研究发展,目的是寻求绿色高效的合成方式。作为目前较热点的过氧化氢的氧化方式,探索最佳的氧化剂/催化剂体系以及反应类型是关键,希望通过综述方法能对1,4-甲萘醌合成的研究起到一定的帮助。