Preparation of flat-polished specimens for SEM-backscattered electron imaging and X-ray microanalysis—importance of epoxy impregnation

Representative and quantitative microstructural information of cement-based materials can be obtained in the backscattered electron and X-ray modes of the scanning electron microscope (SEM). One prerequisite, of several, is to use flat specimens. Microstructures that are minimally affected by the grinding and polishing necessary to produce the flat surface can be obtained. It is essential to fill the pores of the specimen with epoxy resin prior to grinding and polishing. After hardening, the epoxy stabilizes the microstructure and enables it to withstand the stresses of grinding and polishing without alteration. In the present paper, we describe a preparation technique that we consider to have produced excellent polished specimens. The importance of epoxy impregnation is demonstrated.     

Optical scattering in beef steak to predict tenderness using hyperspectral imaging in the VIS-NIR region

The objective of this research is to develop a non-destructive method for predicting cooked beef tenderness using optical scattering of light on fresh beef muscle tissue. A hyperspectral imaging system (λ = 496–1,036 nm) that consists of a CCD camera and an imaging spectrograph, was used to acquire beef steak images. The hyperspectral image consisted of 120 bands with spectral intervals of 4.54 nm. Sixty-one fresh beef steaks, including 44 strip loin and 17 tenderloin cuts, were collected. After imaging, the steaks were cooked and Warner-Bratzler shear (WBS) force values were collected as tenderness references. The optical scattering profiles were derived from the hyperspectral images and fitted to the modified Lorentzian function. Parameters, such as the peak height, full scattering width at half maximum (FWHM), and the slope around the FWHM were determined at each wavelength. Stepwise regression was used to identify 7 key wavelengths and parameters. The parameters were then used to predict the WBS scores. The model was able to predict WBS scores with an R = 0.67. Optical scattering implemented with hyperspectral imaging shows limited success for predicting current status of tenderness in beef steak.     

成像光谱技术发展的科学背景和现状

本文分析与阐述了成像光谱技术发展的科学背景与现状。     

热成像技术在厚膜混合集成电路热设计中的应用

本文简述了红外热成像技术用于厚膜混合集成电路热设计中的理论与实验方法，并讨论了结果。     

Influence of zero-loss filtering on electron optical phase contrast

Complex scattering amplitudes are used to calculate the phase contrast of colloidal gold particles. Comparison of measurements of the phase contrast intensity at the centre of the gold particle as a function of defocus for unfiltered and zero-loss filtered images demonstrates the increase in phase contrast achieved by zero-loss filtering even for a thick carbon substrate film. The granulation of amorphous germanium films is measured by the spatial rms (root mean square) values of image intensity in a defocus series.     

岩心扫描成像技术及其网络数据库管理系统

伴随着信息技术的发展,传统的岩心管理方法已不适应现代信息共享的需求。为了有效地发挥岩心这一珍贵地质资料在生产、科研和管理中的作用,通过对岩心扫描成像技术的介绍,系统地描述了岩心扫描仪的特点、数据库的建立、岩心资料的永久性保存和管理以及网络化管理。认为随着计算机技术的不断发展与进步,信息技术在提升石油勘探开发水平方面将会起到重要作用,改进传统的岩心图文资料管理方法,推行计算机管理是现代信息管理的必然要求。     

红外热象仪在电力系统中的应用

本文主要阐述使用红外热象仪检测运行中的电力设备所发现的问题。文中通过若干实例介绍了用红外热象仪检测带电运行的发电机、电容器及连接头，并查出带有严重缺陷的部位，从而避免事故发生。     

多频电磁波测井数据的反演成像技术及应用

针对测井数据反演成像问题的不适应定性，采用了带不等式约束的正则化最小二乘迭代反演，模型响应的正演计算用有限元方法实现，模型响应对电阻率及介电常数的偏导数用格林函数和互换原理计算，对高低频电磁波测井数据的反演分两步进行，首先用低频数据得到电阻率的大致分布，再以此为初值，用高频电磁波数据同时反演电阻率和介电常数，通过对模型的数值模拟和某地热田1口井的实际资料的应用表明，电磁波测井数据的反演厉像能给出井周近旁介质的电性参数分布，而在离井较远的区域不能得到稳定可靠的解释结果，无论高频还是低频测井数据，要得到高质量的成像结果，工作频率的适当选择及接收器灵敏度的提高是至关重要的。     

井-地电位成像技术研究剩余油分布

井—地电位测量是在地表向注水井中套管施加一个大电流，通过测量地表加注高矿化度的导电流体前后的电位分布，经数据处理及反演计算，求出注水各小层的电阻率分布，进而计算出各小层的剩余油饱和度分布状况，指出油藏的挖潜方向。从临17—22井区应用情况来看，与生产动态符合较好。