Morphological aspects of rubber fracture and wear

Morphology of carbon black (CB)‐filled rubber was studied with AFM and SEM and the classification of filler agglomerates, based on their internal structure and filler–matrix interactions, has been proposed. It varies according to the activity of CB and the kind of rubber. It has been shown that fracture of rubber starts either inside filler agglomerates (de‐cohesion) or in a filler–matrix interphase (de‐adhesion) initiating wear of the material. Microscopic observations correlate well with TGA and EPR data of wear debris collected during friction of rubber. The increase of thermal stability of CB and the appearance of additional spin signals, respectively, for elongated samples or debris, are proposed to be associated with de‐cohesion or de‐adhesion of the agglomerates. New approach to the fracture of rubber called “fatal agglomerate concept” is presented. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Second-order Wagner theory of wave impact

The paper deals with the two-dimensional unsteady problem of the impact of a liquid parabola onto a rigid flat plate at a constant velocity. The liquid is assumed ideal and incompressible and its flow potential. The initial stage of the impact is the main concern in this study. The non-dimensional half-width of the contact region between the impacting liquid and the plate plays the role of a small parameter in this problem. The flow region is subdivided into four parts: (i) the main flow region, the dimension of which is of the order of the contact-region width, (ii) the jet-root region, where the curvature of the free surface is very high and the flow is strongly nonlinear, (iii) the jet region, where the flow is approximately one-dimensional, (iv) the far-field region, where the flow is approximately uniform at the initial stage of impact. A second-order solution in the main flow region has been derived and matched to the first-order inner solution in the jet-root region. The matching conditions provide an estimate of the dimension of the contact region for small time. Pressure distributions in both the main flow region and the inner region are derived. The accuracy of the obtained asymptotic formulae is estimated. The second-order hydrodynamic force acting on the plate is obtained and compared with available experimental data. A fairly good agreement is reported.     

油润滑下Al/MoSi2材料的摩擦学特性

运用M-200型磨损试验机测定了油润滑下Al/MoSi2材料的摩擦磨损性能，采用SEM和X射线观察与分析了摩擦副表面的形貌和相组成，探讨了磨损机制。结果表明：采用20#机油润滑可有效地提高Al/MoSi2材料的摩察磨损综合性能；与干摩擦状态相比，其摩擦系统和磨损率分别下降了40%和60%；油润滑时，Al/MoSi2材料的磨损机制主要表现为疲劳点蚀和磨粒磨损。     

起落架落震试验飞机机轮三向冲击位移的动态测量

为了研究飞机起落架受冲击载荷时的功量吸收状况，须在起落架落震试验中，对飞机着陆瞬间起落架机轮在空间三个方向上冲击位移的动态变化量进行测量。为此，本文设计了四自由度空间定位装置，并使其与计算机连接，实现了落震试验过程中，起落架在高速冲击状态下机轮三向位移的有效测量与记录。     

Expert identification and selection: Legal liability concerns and directions

Legal liabilities pertaining to the identification and selection of domain experts is an issue that could adversely impact expert systems developers. Problems pertaining to flawed knowledge, improperly defined expertise, and behavioural and psychological impediments are just some of the issues. This paper examines the torts of strict products liability and negligence that system developers could incur as a result of expert-related difficulties. Parallels from legal scholars and federal and state court decisions are discussed relevant to expert system projects and developers. The paper concludes with a presentation of steps that systems developers can take to minimize potential legal liability.     

Al2O3—TiB2陶瓷刀具材料的高温氧化及其对刀具耐磨性能的影响

研究了Ａｌ２Ｏ３－ＴｉＢ２陶瓷刀具材料在１０００℃下的氧化行为，用ＸＲＤ、ＳＥＭ分析了氧化后的相组成及显微结构。结果表明：Ａｌ２Ｏ３－ＴｉＢ２陶瓷材料在１０００℃空气中氧化增重符合抛物线规律；随ＴｉＢ２含量的增加，该材料的抗氧化能力下降。     

共混合金力学性能的研究 Ⅲ.CPP对PVC共混体系力学性能的影响

将ＰＰ氯化后作为ＰＶＣ共混体系的刚性体分散相，旨在改善高分子合金的相容性，ＤＳＣ实验表明，ＣＰＰ（氯化聚丙烯）与ＰＶＣ的相容性比ＰＶＣ与ＰＰ的好。在用弹性体增韧的ＰＶＣ／ＣＰＥ和ＰＶＣ／ＡＢＳ共混体系中加入刚性体ＣＰＰ后，随着ＣＰＥ、ＡＢＳ用量的增加，共混合金的冲击强度增加，并且由刚性的ＣＰＰ的加入所产生的冲击强度最大值的幅度也有所提高，其趋势是ＣＰＥ、ＡＢＳ用量越多，共混合金冲击强度值达到最大值时所需ＣＰＰ的量越多，增加的幅度也越大。ＣＰＰ对共混合金的拉伸屈服强度和断裂伸长率的影响比较小。     

Sliding wear behavior of salt bath nitrocarburized medium carbon steel

Salt bath nitrocarburizing is a well-known thermochemical diffusion process for enhancing the tribological and corrosion properties of ferrous components. The current work describes the role of a compound layer developed during nitrocarburizing, both in the ferritic and austenitic regimes of Fe-N-C system, on the sliding wear behavior of a medium carbon steel. The wear behavior of the nitrocarburized steel discs was assessed by the pin-on-disc tests (ASTM G 99-99) under different normal loads running against a hardened SAE52100 pin. It was observed that the compound layer on the surface not only controlled the wear rate but also resisted the adhesive wear/transfer of material from pin to disc, aside from providing low-friction coefficients.     

小眼井最优水力学设计及分析

在充分考虑小眼井钻井特点和合理确定环空压耗的基础上，将喷射钻井理论和环空携岩理论有机结合起来，导出了在两种工作方式下优化设计小眼井钻井水力参数模型，并开发了应用软件。通过实例计算，提出了在小眼井最优水力学设计中采用最大水功率工作方式的重要性，并建议在大眼井的水力参数设计中考虑钻柱的偏心、旋转和钻杆接头对环空压耗的影响。     

HDPE的耐磨蚀性与抗冲击性的研究

用自制的旋臂式磨蚀实验仪，研究了５种高密度聚乙烯和１种顺丁橡胶改性的高密度聚乙烯，在铁尾矿和铁精矿浆体中的耐磨蚀性。耐磨蚀性最差的是ＨＤＰＥ２２００Ｊ，耐磨蚀性较差的是ＨＤＰＥ６３００Ｍ；ＨＤＰＥ５０００ｓ，６０９８和２４８０的耐磨蚀性较好；ＨＤＰＥ／ｃｉｓ－ＢＲ的耐磨蚀性最好。