Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

Duration of slip-resistant shoe usage and the rate of slipping in limited-service restaurants: results from a prospective and crossover study

Several studies have indicated that slip-resistant shoes may have a positive effect on reducing the risk of slips and falls, a leading cause of injury at work. Few studies, however, have examined how duration of shoe usage affects their slip-resistance properties. This study examined the association between the duration of slip-resistant shoes usage and the self-reported rate of slipping in limited-service restaurant workers. A total of 475 workers from 36 limited-service restaurants in the USA were recruited to participate in a 12-week prospective study of workplace slipping. Of the 475 participants, 83 reported changing to a new pair of shoes at least once during the 12-week follow-up. The results show that slip-resistant shoes worn for less than six months were moderately more effective than those worn for more than six months. Changing to a new pair of shoes among those wearing slip-resistant shoes at baseline was associated with a 55% reduction in the rate of slipping (RR = 0.45, 95% CI = 0.23–0.89). Further research is needed to develop criteria for the replacement of slip-resistant shoes.

Practitioner Summary: The duration of usage impacts the slip-resistance properties of slip-resistant shoes. Slip-resistant shoes worn for less than six months were moderately more effective in reducing slips than slip-resistant shoes worn for more than six months. Shoe use policies should not only encourage or require their use but also include guidance on replacing slip-resistant shoes at regular intervals.     

Toughness Optimization of SBR Elastomers – Use of Fracture Mechanics Methods for Characterization

Elastomer materials are used in a wide application range and subjected to different loading from which failure of the material results. Because this failure is caused by initiation and propagation of cracks, the application of fracture mechanics methods for the assessment of the material is obvious. A short summary of the methods of technical fracture mechanics including possibilities of determination of crack resistance curves is given. Vulcanizates on the basis of SBR 1500 with various sulfur and carbon black contents were investigated. For describing the crack initiation and crack propagation behavior, several fracture mechanics examination methods were applied. Tear‐analyzer results were used to assess the crack propagation behavior under fatigue‐like loading conditions. Furthermore, for the characterization of the crack resistance of the materials under impact‐like loading conditions, instrumented tensile‐impact tests were performed. To obtain information about the initiation and propagation of a stable crack, quasi‐static fracture mechanics tests were applied. The results of the several tests are discussed in dependence on sulfur and carbon black contents. We found a non‐monotonous behavior of the toughness as a function of carbon black loading. An explanation is given in connection with a percolation‐like transition in filler morphology on larger length scales.

Schematic crack propagation curve for characterizing the fatigue behavior of the vulcanizates recorded in a TFA test.     

Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

基体和增强体对聚合物基摩擦材料性能影响研究

摩擦系数、磨损率和冲击强度是聚合物基摩擦材料的重要性能指标。本文试验研究基体含量对摩擦系数、磨损率的影响和增强体含量对冲击强度的影响,从理论方面分析增强体对摩擦磨损性能的影响。试验结果表明,在进行聚合物基摩擦材料的配方设计时,要根据所选用酚醛树脂和增强纤维的种类合理控制用量,可达到较好的摩擦磨损性能和冲击韧性。     

浅谈玻璃钢的加工

本文在实际研究和应用的基础上，对玻璃钢的传统加工方法和特种加工方法，如激光切割、纯水射流切割和磨料水射流切割作了简要论述。     

Desalination in the gaza strip: drinking water supply and environmental impact

More than 90% of the population of the Gaza Strip depends on desalinated water for drinking purposes. About 90% of the groundwater is unacceptable for drinking as a result of contamination by nitrate and chloride. One of the major options for resolving the water problems is the utilization of desalination technology for both sea and brackish water. The objective of this article is to address desalination water management in its embryonic stage in the Gaza Strip. The sources of drinking water supply, distribution system and the environmental impact of brine water will be fingered in detail. Desalination facilities range from large seawater plants to small brackish desalination units on a home scale. Governmental, non-governmental and private desalination plants are common. The distribution system of desalinated water is a responsibility of governmental, non-governmental, private small community bodies and even individuals. Disposal of brine water is made either directly or indirectly into the sea, sewage system, poor land, channels, wadies, etc. Brine constituents have an adverse impacton the surrounding environment, e.g., sea life, soil, wastewater treatment plants and the groundwateraquifer. The lack of real environmental impact assessments, especially for mid- and home-scale units may lead to a deterioration of the environment. The fragmentation of the responsibilities of water desalination, distribution of desalinated water and the disposal of brine water suggest that urgent action should be taken (e.g., legislation or establishment of a supervisory body). In other words, strict policies and management actions are to be taken in order to alleviate the health and environmental impact of an important and uncontrolled new system.     

抗冲聚丙烯结构与性能研究

对部分国内外抗冲聚丙烯(PP)产品进行了微观形态和结构分析，研究其对材料宏观力学性能的影响。实验结果表明：抗冲PP是一个含有PP均聚物、丙烯与乙烯-丙烯两嵌段共聚物、乙丙橡胶(EPR)、聚乙烯均聚物等的多相体系。EPR的分子序列结构对聚合物抗冲击性能起主要作用。在序列结构中，丙烯、乙烯单体在分子链上的位置交换越频繁，抗冲击性能越得到提高。丙烯序列平均长度的增大对抗冲击性能有一定的削弱作用。     

氮化硅陶瓷高温摩擦学性能

本文研究热压氮化硅陶瓷与３Ｃｒ２Ｗ８Ｖ钢组成的销－盘摩擦副，在空气中非润滑条件下，４００～８００℃不同载荷（４９～３４３Ｎ）的摩擦磨损性能；测定了磨擦系数和Ｓｉ３Ｎ４销的磨损因子；通过对Ｓｉ３Ｎ４磨损面的ＳＥＭ形貌观察、Ｘ射线相结构分析，探讨了陶瓷销的磨损机理