关于蛋白质塑料的研究

近年来农业可再生材料受到人们的重视,蛋白质是可生物降解的环境友好材料。以不同农作物蛋白质来源分类介绍了国内外蛋白质塑料的研究进展,有大豆蛋白质、玉米蛋白质、向日葵蛋白质、小麦蛋白质、棉籽蛋白质及其他豆类蛋白质。涉及蛋白质材料的增塑、交联、共混等改性方法和压缩、挤出、注射等成型方法。     

两极控制图在注塑瓶盖壁厚控制中的应用

针对注塑瓶盖壁厚控制的特点,介绍了统计过程控制(SPC)中的均值-极差(x-R)控制图在塑料瓶盖壁厚控制中的局限性,将两极(L-s)控制图与均值-极差控制图进行了比较,阐述了两极控制图在塑料瓶盖壁厚控制中的优越性,论述了两极控制图的构造原理和控制限计算方法,提出了两极控制图在注塑瓶盖壁厚控制中的应用,并在对两极控制图分析的基础上,对注塑成型的过程能力进行分析和改善。     

A novel algorithm for layout optimization of injection process with random demands and sequence dependent setup times

Injection molding is an ideal manufacturing process for producing high volumes of products from both thermoplastic and thermo setting materials. Nevertheless, in some cases, this type of manufacturing process decelerates the production rate as a bottleneck. Thus, layout optimization plays a crucial role in this type of problem in terms of increasing the efficiency of the production line. In this regard, a novel computer simulation–stochastic data envelopment analysis (CS-SDEA) algorithm is proposed in this paper to deal with a single row job-shop layout problem in an injection molding process. First, the system is modeled with discrete-event-simulation as a powerful tool for analyzing complex stochastic systems. Then, due to lack of information about some operational parameters, theory of uncertainty is imported to the simulation model. Finally, an output-oriented stochastic DEA model is used for ranking the outputs of simulation model. The proposed CS-SDEA algorithm is capable of modeling and optimizing non-linear, stochastic, and uncertain injection process problems. The solution quality is illustrated by an actual case study in a refrigerator manufacturing company.     

PVFM泡沫塑料的研究及应用

介绍了PVFM泡沫塑料的性能、技术指标、成型方法及应用情况     

复杂制品注塑成型模拟分析

应用CAE软件MoldflowPlasticsInsight4.1的充模、保压、冷却、翘曲等分析模块,对汽车尾门饰件注塑成型过程进行CAE分析,研究了浇口位置、工艺参数等对制品性能的影响。最后,基于模拟结果分析了制品翘曲的主要原因,为模具设计及注塑工艺的确定提供参考。     

低密度冷模塑聚氨酯软质泡沫塑料

介绍了低密度冷模塑聚氨酯软质泡沫塑料的配方体系，工艺特点及泡沫性能。指出该泡沫应用范围较广，发展前景甚好。     

橡胶注射过程中压力变化的研究

对橡胶注射过程中的压力变化进行了理论与实验研究。充模流动模型的压力、能量控制方程分别为：选用高斯方法求解总体有限元方程。实验与计算分析对比证明．本文选用的数学模型和计算方法所得结果与实测结果基本吻合、该模型可用以代替大量的实验，对橡胶充模过程进行模拟，并用Ｇｒａｐｈｅｒ软件对数值结果进行处理，以图表直观地表达出各种因素对充模过程的影响。     

Compounding and injection molding of polybutene‐1/polypropylene blends

The effect of shear‐controlled orientation injection molding (SCORIM) was investigated for polybutene‐1/polypropylene blends. This article reports on the methods and processing conditions used for blending and injection molding. The properties of SCORIM moldings are compared with those of conventional moldings. SCORIM is based on the application of specific macroscopic shears to a solidifying melt. The multiple shear action enhances molecular alignment. The moldings were investigated with mechanical tests, differential scanning calorimetry studies, and polarized light microscopy. The application of SCORIM improved Young's modulus and the ultimate tensile strength. The gain in stiffness was greater for higher polybutene‐1 content blends. A drastic decrease in the strain at break and toughness was observed in SCORIM moldings. The enhanced molecular orientation of SCORIM moldings resulted in a featureless appearance of the morphology. Interfacial features due to segregation were visible in the micrographs of SCORIM moldings. Both conventional and SCORIM moldings exhibited form I′ in polybutene‐1. This article explains the relationship between the mechanical properties and micromorphologies. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 806–813, 2003     

Unique clay orientation in the injection-molded bar of isotactic polypropylene/clay nanocomposite

In this article, the injection-molded bars of isotactic polypropylene/organoclay nanocomposite with different clay contents have been obtained via dynamic packing injection molding (DPIM). The oriented microstructure including layered nanoparticles and PP lamellae has been inspected through 2D-WAXS analyses along the sample thickness of the molded bars. Depending on the clay content and sample thickness, various oriented clay structures with nanoparticles uniplanar-axially oriented parallel to the surface of molded bar, or partially tumbled around the flow axis of the molded bar, or even a random orientation, could be observed. The observed orientation behavior of nanoparticles could be temporarily elucidated as the results of the sensitive response of layered nanoparticles to shear deformation and the structural recovery of clay network assisted by the electrostatic attraction existing between adjacent nanoplatelets.     

UG软件CAD/CAM技术在注塑模生产中的应用

以手机外壳为例，介绍利用UG软件提供的MoldWizard和CAM数控编程两大模块，实现从模具设计到数控铣加工的全过程。