XRF法测定高岭土中的主次量元素

采用X射线荧光光谱法取代原有的化学法，分析了高岭土中的9种主次量元素。通过对测定条件的选择以及样品制备等方面的考察，制定出最佳分析方案。分析结果表明，该方法准确、可靠，分析周期由原来的6h缩短为10min.     

Prediction of the effects on dynamic response due to distributed structural modification with additional degrees of freedom

The aim of this study is to investigate means of efficiently assessing the effects of distributed structural modification on the dynamic properties of a complex structure. The dynamic properties of the modified structure can be determined by experimental testing or numerical simulation, both of which are complex, expensive and time-consuming. Assuming that the original dynamic characteristics are already established and that the modification is a relatively simple attachment, the modified dynamic properties may be determined numerically without solving the equations of motion of the full-modified structure. The frequency response functions (FRFs) of the modified structure can be computed by coupling the original FRFs and a delta dynamic stiffness matrix for the modification introduced. The validity of this approach is investigated by applying it to a cantilever beam to which a smaller beam is attached as modification. The original FRFs were obtained experimentally as well as numerically. The delta dynamic stiffness matrix was determined numerically by modeling the attachment and part of the original structure including the attachment points. The FRFs of the modified beam were then computed. Good agreement is obtained by comparing the results to the FRFs of the modified beam determined experimentally as well as by numerical modeling of the complete modified structure.     

用αβ谱仪测量人工αβ放射性气溶胶体积活度的试验研究

本文介绍了用αβ谱仪系统同时测量αβ谱、实现Ｒｎ／Ｔｈ子体补偿、确定超铀α核素气溶胶体积活度及人工放射性气溶胶总β体积活度的技术途径。利用ＲａＡ、ＲａＣ′ａ峰的二段时间计数可确定空气中ＲａＡ、ＲａＢ、ＲａＣ的气溶胶体积活度，相应的，也能给出ＲａＢ、ＲａＣ对总β计数的贡献。根据一般环境条件下的平衡比，用ＴｈＣ′的。计数修正Ｔｈ子体对αβ测量的影响。￣［２３９］ｐｕ或／和￣［２４１］Ａｍ人工核素的α计数，可通过两段时间分别扣除ＲａＡ、ＲａＣ′拖尾的方法确定；β计数分别扣除Ｒｎ／Ｔｈ子体β贡献即可确定。在本文规定的测量条件下，对室内天然Ｒｎ子体水平在１５Ｂｑ／ｍ￣３以下，超铀α核素气溶胶体积活度的测量下限可达到０．１Ｂｑ／ｍ￣３；即使在７５Ｂｑ／ｍ￣３环境下，人工核素总β的测量下限也可达ｌＢｑ／ｍ￣３以下。     

碳化硅加热元件的电性能和使用

本文介绍碳化硅加热元件的电特性、表面负荷以及工作气氛对它的影响，并对它设计和使用要点举例予以说明。     

Analysis of color symbology from the perspective of cultural semiotics focused on Korean costume colors according to the cultural changes

The purpose of this study was to analyze the symbolization of colors as cultural codes, based on costume colors. In order to study the significance of colors in cultural changes, we carried out a quantitative analysis and interpreted it from the perspective of cultural semiotics. The range of this study was focused on Korean costume colors, over diverse diachronic stages of Korean culture. For this study 1535 color samples were collected, measured with a spectrophotometer, and analyzed quantitatively according their diachronic stages of origin. As a result, red, blue, and yellow were found to be the most frequently used colors during the Chosun Dynasty, a period based on Confucianism. These colors acted as cultural codes with cultural significance. During the Modern times pink, light blue, and black increased in frequency and represented the reception of western culture, the changing sex role of women in society, and utilitarianism. In these days, neutral colors and grayish tones of all colors are the most significant colors of high frequency. The use of such colors is closely related to industrialization, mechanization, functionalism, and the changes of women's sex roles in the societies. They are used as cultural codes, especially to emphasize a rational and masculine image rather than a feminine image. © 2006 Wiley Periodicals, Inc. Col Res Appl, 32, 71–79, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20290     

电渗析法处理氯化铵废水的研究

研究了用电渗析法处理稀土生产过程中产生的NH4Cl废水的问题,结果表明用二级电渗析法可经济地将NH4Cl溶液从6%提高到13%。该工艺已在包头和发稀土公司20t·h-1废水处理工艺上得到了成功的应用。     

Mortar finite element discretization for the flow in a nonhomogeneous porous medium

Darcy’s equations model the flow of a viscous incompressible fluid in a rigid porous medium. One of the parameters of the system depends on the permeability of the medium and, when this medium is not homogeneous, the variations of the parameter could be very high. To handle this phenomenon, we propose a discretization of the model that relies on the mortar finite element method. Indeed, the idea is to construct a decomposition of the domain such that the permeability is constant on each element of the partition and to use independent meshes on the different subdomains. We perform the a priori and a posteriori analysis of this discretization and present some numerical experiments which are in good coherency with the results of the analysis.     

Effect of Rare Earth Elements on the Induction Frequency of the Somatic Cell Embryo in The Fruit of Chinese Wolfoerry

ＥｆｆｅｃｔｏｆＲａｒｅＥａｒｔｈＥｌｅｍｅｎｔｓｏｎｔｈｅＩｎｄｕｃｔｉｏｎＦｒｅｑｕｅｎｃｙｏｆｔｈｅＳｏｍａｔｉｃＣｅｌｌＥｍｂｒｙｏｉｎＴｈｅＦｒｕｉｔｏｆＣｈｉｎｅｓｅＷｏｌｆｏｅｒｒｙＹａｎｇＨａｎ－Ｍｉｎ（杨汉民）；ＤｕＬｉｎ（杜琳）（...     

矩形橡胶复合材料层合板几何非线性分析

文中应用简单高阶剪切层合理论和大变形理论对各向异性纤维增强的矩形橡胶复合材料层合板进行了几何非线性分析.与线性理论相比,本文作者进行的层合板大变形状态的几何非线性分析和所计算的层板应力分布,更具有准确性.     

Discrete quadratic curvature energies

We present a family of discrete isometric bending models (IBMs) for triangulated surfaces in 3-space. These models are derived from an axiomatic treatment of discrete Laplace operators, using these operators to obtain linear models for discrete mean curvature from which bending energies are assembled. Under the assumption of isometric surface deformations we show that these energies are quadratic in surface positions. The corresponding linear energy gradients and constant energy Hessians constitute an efficient model for computing bending forces and their derivatives, enabling fast time-integration of cloth dynamics with a two- to three-fold net speedup over existing nonlinear methods, and near-interactive rates for Willmore smoothing of large meshes.