D-泛酸钙的合成技术及应用

主要介绍了D 泛酸钙的合成技术及其应用     

纳米Fe/C复合材料的原位合成

在石油渣油中加入二茂铁，通过热缩聚反的位合成纳米级铁粒子均匀分散于炭基体中的新型复合材料，研究了在420℃热缩聚时停时间和二茂铁添加量对Fe/C形成的影响，并用TEM和XRD观测和分析了Fe/C的形态和结构，结果表明，在基体中铁粒子的粒径为25－50nm，在一定条件下，二茂铁添加量的增加和停留时间的延长均使Fe/C产率提高，停留时间对热缩聚反应的影响遵循一级反应动力学，二茂铁的添加能显著提高反应速率常数k值。     

手套箱气氛中氚化水处理的工艺研究

分子筛吸附柱和热金属镁床是手套箱气氛中氚化水 (HTO)搜集和分解处理的一种有效手段。测试了分子筛柱对气氛中水的吸附性能和热金属镁床对HTO的分解性能。结果表明 :分子筛柱对气氛中水的吸附效率 >99 99% ,在空气中水含量为 3 4× 1 0 - 3～ 4 2× 1 0 - 3条件下 ,未发现吸附柱水的贯穿现象 ;热金属镁床对HTO的分解率 >99 9% ,当金属镁的消耗量大于 80 %时 ,未见分解率明显降低。     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

Films and fibers of oriented single wall nanotubes

As-produced nanotubes form a light, fragile and isotropic soot. Different efforts are made to process nanotubes into macroscopic forms of more practical use and more controlled properties. We briefly review in this paper two methods recently proposed to make films of magnetically aligned nanotubes and fibers by using an electrophoretic method. Preferential orientation of the nanotubes in the plane of the films or along the fiber axis is an important feature of the obtained materials. Then we describe in details a different, spinning like, process for making fibers out of single wall carbon nanotubes. This process consists of dispersing the nanotubes in a surfactant solution, re-condensing the nanotubes in the flow of a polymer solution to form a nanotube mesh, and then collating this mesh to a nanotube fiber. The behaviors of the surfactant-stabilized dispersions, which are also presented, are critical for this process. The degree of nanotubes alignment in dried fibers has been characterized by X-ray scattering. It is found to be smaller than the alignment obtained in the previous materials. However, the processing is simpler and faster and potentially scalable for large-scale production.     

一种便携式高精度数据采集系统的设计

介绍了微处理器MSC1210的功能和特点,对基于MSC1210的便携式高精度数据采集系统的硬件组成和软件设计进行了阐明,通过嵌入式GUI开发实现了液显人机交互功能。该系统具有速度快、处理能力强、可靠性高、功耗低等优点。     

C5/C6异构化催化剂的首次工业应用

采用中石化金陵分公司研究院研制的CI-50(Pd/丝光沸石)作C5/C6烷烃异构化催化剂.详细介绍了该催化剂的工业放大试验装置的工艺流程、首次开工过程中技术问题及处理方法.     

Finite element micromechanical modelling of unidirectional fibre-reinforced metal-matrix composites

Typical finite element formulations and models for unidirectional composite materials are reviewed. The application of micromechanical finite element analysis to the modelling of unidirectional fibre-reinforced metal-matrix composites is demonstrated by presenting some studies from recent publications. It is shown that while analytical models offer a simple tool for obtaining the overall response of composites, finite element analysis provides more accurate and detailed characterisation of composite properties for complicated geometries and constituent property variations. Various effects that influence the stress/strain response and fibre/matrix deformation of composites are studied through modelling. These effects include the fibre coating and reaction layer, fibre shape and distribution, metallurgical and environmental factors, stress distributions and damage. It is demonstrated that the properties and constituent phase interaction of metal-matrix composites are best modelled by finite element analysis. It is emphasized that in order to obtain good predictions, the models must be coupled with first-hand characterisations of the constituent phases and their interactions, including the thermal history of the specimens.     

K0.9Li0.1（Ta0.5Nb0.5）O3晶体压电应变系数的测量

用准静态ｄ＿（３３）测量仪和干涉法相结合。测量了Ｋ＿（０．９）Ｌｉ＿（０．１）（Ｔａ＿（０．５）Ｎｂ＿（０．５）Ｎｂ＿（０．５））Ｏ＿３晶体的压电应变系数。结果为：ｄ＿（３３）＝８６．０，ｄ＿（３３）＝一２９．５，ｄ＿（１５）＝１１２．９×１０￣（－１２）Ｃ／Ｎ．     

温度调谐LBO晶体光参量振荡器

本文详细研究０．５３２μｍ激光泵浦、温度调谐Ⅱ型非临界相位匹配ＬＢＯ光参量振荡器。当温度从２０℃升高到２００℃时，其信号波和闲置波的调谐范围分别为１．００２～０．８９８μｍ和１．１３４～１．３０６μｍ。本装置最吸引人之处是本征输出线宽比Ⅰ型情形小一个量级。