Properties of palm-oil-in-water emulsions: Effect of mixed emulsifiers

Palm-oil-in-water emulsions were prepared with mixtures of Tween 40 and Span 40 in various proportions. Stability and droplet-size distribution of the emulsions were monitored. Interfacial tensions of the palm oil/water interface were also determined in the presence of these emulsifier mixtures. Emulsifying efficiency of the emulsifier mixtures was assessed. No synergistic effect of Tween 40 (sorbitan monopalmitate with 18–22 moles of ethylene oxide) and Span 40 (sorbitan monopalmitate) was found on interfacial tension. Tween 40 alone (hydrophilic-lipophilic balance value 15.6) at 1.0% w/w gave palm oil emulsions that were stable for more than 30 d at 60°C. Emulsifier mixtures of Tween 40 and Span 40 with hydrophilic-lipophilic balance values in the range of 8.0–8.6 produced stable emulsions only at much higher emulsifier-mixture concentrations. The inherent nature of the oil and the accompanying natural surface-active materials present in the oil can influence the prevailing conditions at the oil/water interface and alter composition of the interfacial film and hence its stability.     

Electrochemical anticorrosion performance evaluation of Al2O3 coatings deposited by MOCVD on an industrial brass substrate

Alumina (Al₂O₃) coatings of different thickness were deposited on OT59 brass substrate (BS) using the metal organic chemical vapour deposition (MOCVD) technique to evaluate the corrosion performance by EIS measurements. The used precursor was dimethyl-aluminium-isopropoxide. Electrochemical characterizations of the deposited films were performed in a standard very aggressive acidic solution (aerated 1N H₂SO₄ at 25 °C up to 168 h of immersion time) by means of direct current method (Tafel curves) and electrochemical impedance spectroscopy (EIS). The Rutherford backscattering spectroscopy (RBS) indicated that the films are very pure with the correct Al₂O₃ stoichiometry, while the IR absorption spectra showed that the films did not contain any OH groups. The surface film morphology was investigated by atomic force microscopy (AFM) and displayed a globular texture. The films were very smooth, with a maximum root mean square roughness, for example, of 14 nm for a 0.96 μm thick coating. The EIS data confirmed, as expected, that a 2.40 μm Al₂O₃ layer ensures the best corrosion protection after 168 h of immersion in the very acidic environment used.     

Synthesis and characterization of polyurea microcapsules containing essential oils with antigerminative activity

In this paper we report on the preparation and characterization of polyurea‐based microencapsulated systems, containing essential oils as core materials, for potential applications in controlled‐release formulations of agrochemicals. Microcapsules were synthesized by interfacial polymerization in o/w emulsion between polyfunctional isocyanates and diamines, to investigate the effect of the monomer kind on the morphology and properties of the produced samples. The synthetic conditions that gave the best results were used to microencapsulate four essential oils, able to interfere with the seed germination and radicle elongation of some test plants. The produced samples were characterized, with the aim to analyze their morphology and to verify the effectiveness of essential oil microencapsulation. Moreover, preliminary bioassay based on seed germination and subsequent radical growth were carried out to study the effects of the microencapsulated essential oils. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

压痕法确定纤维复合材料界面影响区蠕变特性的数值模拟法

研究由平头压痕蠕变试验来确定纤维复合材料界面影响区蠕变性能参数的可行性。利用有限元蠕变分析确定在定压痕应力下的压痕蠕变率，重点放在稳定压痕蠕变率和复合材料材料界面影响区的蠕变性能参数的关系上。计算结果表明，界面影响区的剪应力沿纤维轴向在蠕变的主要过程中均匀分布，并且保持不变；详细地研究了压头大小对压痕蠕变响应的影响：提出两种方法由压痕蠕变试验来确定界面影响区蠕变性能参数，并给出了算例。这些结果也有利于准确认识平头压痕蠕变试验从而拓宽其应用范围。     

吸收过程的界面传质机理

以分子热力学为基础 ,对气体吸收过程进行了理论分析 ,导出了传质通量的数学表达式。根据该文分析 ,气液界面传质的源动力来自界面处气液两相的不平衡 ,即只要有传质发生 ,液相界面处的浓度就不会达到与气相呈平衡的浓度。对于气相阻力可以忽略的吸收过程 ,两相传质速率的大小主要取决于液相的溶质界面浓度和液膜厚度 ,影响溶质界面浓度和液膜厚度的主要因素是近界面液相侧的流场分布。利用近界面浓度与液膜厚度的激光测定结果 ,计算了甲醇、乙醇及正丙醇吸收CO2 气泡的传质通量 ,计算结果与实验值吻合良好     

Mixing in Wave Processes Propagating in Gas Mixtures (Review)

A review is made of uptodate investigations in the field of physicomathematical modeling of mixing of solid particles with highvelocity gas flows arising under the action on shock waves, compression waves, and expansion waves on unstable dust deposits on the boundaries of channels or plates and in cavities, as well as on free clouds of particles. In particular, experiments in shock tubes with particles initially located in cavities and on surfaces are described. The experimental data presented in the form of distributions of particle concentrations at various points of space above the unstable layer, pressure distributions on the lower wall of the shock tube, etc., are used for verification of proposed mathematical models in regimes of single particles, interacting continua, and turbulent diffusion. An analysis of experimental and numerical data shows that the models considered sometimes allow adequate identification of the wave structure of motion of the mixture and the field of parameters inside and outside the layer.     

Adhesion Effects of Intermediate Layers on the Densification of Ceramic Powders

In the ceramic technology the first step to produce sintered bodies is the manufacturing of powders which then are densified. The adhesion mechanisms between the single particles and the agglomerates produced from them determine the densification process. Starting from theoretical considerations adhesion mechanisms, such as solid bridge formation, adhesive bonding and glide-promoting effects, are discussed in principle. Subsequently, the effects of surface-active substances on the densification behaviour of clay-ceramics and oxide-ceramic bodies are discussed. Further, the evaluation of the action of additives to the powder mixtures on the microstructure of the compacts, such as porsity and texture, leads to a compaction equation which describes the transition from the powder pile to a densified green body.     

聚合物—铝酸—钙界面组成与结构的XPS研究

从复合材料界面的角度,采用XPS综合方法研究了水泥基聚合物复合材料的高强特别是高抗弯强度的微观机理。结果表明,在材料界面上存在明显的电子结合能化学位移效应,并被证实为聚合物与无机水泥的化学键合所致。界面层的深度分析发现,掺加聚合物的材料界面具有良好的化学和物理结构。作者认为这种材料的高强机理主要是由于两种基质界面间的有效化学键合作用,形成了良好的界面结构,因此,可认为这种作用大于有的学者所解释的聚合物的单一物理作用。     

Effect of MgO Addition on the Bondability and Interfacial Reaction between Dielectric and Glass-Ceramics for the Fabrication of Multi-Component Ceramic Substrates

Bondability and interfacial reaction between dielectric and insulator layers have been examined to obtain a basic understanding of bonding mechanisms. Lead-containing complex perovskite was used as a dielectric material. Two kinds of glass-ceramics were used as insulator material; lead borosilicate glass containing Al_2O3 (insulator A) and the same containing Al₂O₃ and M_gO (insulator B). Dielectric and insulator layers did not bond when insulator A was used. When insulator B was used, however, strong bonding was achieved between the two layers by firing the powder compacts at temperatures between 800° and 1000°C. Addition of M_gO to lead borosilicate glass increased the thermal expansion coefficient to that of the dielectric and enhanced the formation of reaction layers, resulting in good bonding. Two reaction layers were identified. The main reaction products were enstatite and bredigite for one layer contacting the dielectric, and enstatite and a compound with the same diffraction pattern as that of faujasite for the other layers contacting insulator B.     

Preparation of dibasic acid-containing soy phospholipids by chemical and enzyme-catalyzed transesterification and evaluation of their surface-active properties

The preparation of dibasic acid-containing soy phospholipid was made by transesterification reaction with alkyl ester of diabasic acid with both lipase and alkoxide as a catalyst. The extent of incorporation of a dibasic acid varied with the molecular size of the dibasic acid. The extent of incorporation in soy phospholipids was 4–13% in the case of adipic acid and 9–20% in the case of sebacic acid. The surface-active properties of these modified soy phospholipids were examined and were found to be different from those of the original (unmodified) soy phospholipid. The interfacial properties such as critical micelle concentration (CMC), γ_CMC, surface excess concentration Γ_max, and minimum area per molecule (Å), and thermodynamic parameters such as standard free energy of micellization, were found to depend on the hydrophobic part of the dibasic acids.