The role of occlusion in the perception of depth, lightness, and opacity.

A theory is presented that explains how the visual system infers the lightness, opacity, and depth of surfaces from stereoscopic images. It is shown that the polarity and magnitude of image contrast play distinct roles in surface perception, which can be captured by 2 principles of perceptual inference. First, a contrast depth asymmetry principle articulates how the visual system computes the ordinal depth and lightness relationships from the polarity of local, binocularly matched image contrast. Second, a global transmittance anchoring principle expresses how variations in contrast magnitudes are used to infer the presence of transparent surfaces. It is argued that these principles provide a unified explanation of how the visual system computes the 3-D surface structure of opaque and transparent surfaces. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Quality of Crude Fish Oil Extracted from Herring Byproducts of Varying States of Freshness

ABSTRACT: Herring byproducts were stored at 2 and 15 °C for up to 72 h. Over time, significant increases of total volatile bases (TVB), histamine, putrescine, cadaverine, and tyramine were detected. However, only tyramine and TVB levels were temperature-dependent. The level of total polyunsaturated fatty acids (PUFAs) was constant. Longer byproducts storage gave rise to an oil with higher levels of free fatty acids, eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA), and total PUFAs, while fluorescent compounds were lower. A higher storage temperature led to oil higher in α-tocopherol and EPA levels and lower in anisidine value. Surprisingly, the oil with the highest content of PUFAs was not produced from the freshest byproducts, and oil with low oxidation products can be extracted from stored byproducts.     

The development and application of a multiple wavelength illumination technique for the vision-based process monitoring of aero-structure riveting

Airframe riveting is a critical process that requires high levels of process monitoring and quality assurance due to the very high risk associated with the failure of such joints. This paper describes the development of the enabling technology developed for a machine vision-based process monitoring system. One of the key factors affecting the performance of a machine vision system is the quality of the lighting. In the application described in this paper the available lighting was severely limited by the confined space in which the system had to operate. The problem was also compounded by the reflective nature of the objects to be examined. The initial images obtained were not suitable for further processing due to the presence of significant shadows and specular reflections. A novel solution to this problem based on multiple wavelength illumination and signal processing is presented along with results from experimental trials of the approach.     

Elimination of organic matter present in wastewaters from the cork industry by membrane filtration

BACKGROUND: The first stage of the cork industrial process generates great volumes of wastewater with moderate to high organic pollutant content that must be purified using different procedures, such as filtration by membranes. RESULTS: The tangential filtration of these wastewaters was studied using two different laboratory equipments. In the first one, three ultrafiltration (UF) membranes were tested, with molecular weight cut‐off (MWCO) 100 kDa and 30 kDa, and two operating modes were used: total recycling of permeate and retentate streams, and in continuous mode, without recycling both streams. In the total recycling UF experiments, the influence of the operating variables on the permeate flux was first established. The effectiveness of the different membranes was determined by evaluating the rejection coefficients for several parameters that measure the global pollutant content of the effluent. The values found for these rejection coefficients were in the following order: ellagic acid and color > absorbance at 254 nm > tannic content > COD (chemical oxygen demand). In the continuous mode experiments, the fouling mechanism for each membrane was established by fitting the experimental data to various filtration fouling models given in the literature. The operating mode in the second equipment was batch concentration, and additional experiments were carried out with an UF membrane (2 kDa), and with a NF membrane (with MWCO in the range 150–300 Da). CONCLUSIONS: The three operating modes tested provided different rejection levels of organic matter; among them, the most effective procedure tested was batch concentration mode using a NF membrane. Copyright © 2007 Society of Chemical Industry     

箍筋末端135度弯钩二次就位法讨论

随着人们对建筑安全的日益重视 ,对建筑抗震要求的提高 ,国内外有关规范都对箍筋末端的设置作了明确规定 ,要求做成 135度弯钩。而在工程实践中 ,由于施工上的技术困难 ,很多工程都只设置成 90度弯钩。笔者提出的箍筋末端 135度弯钩二次就位法在基本不增加 90度弯钩施工难度与费用的基础上实现了 135度弯钩的施工 ,其法是可行的     

小波包变换压缩与地震数据处理

探讨了地震数据经小波包变换压缩后对后续处理过程的影响,以及经过某些处理后的数据会对小波包变换压缩产生什么影响等问题。将小波包变换压缩地震数据的结果与快速傅里叶变换压缩地震数据的结果进行了对比,其结果表明:应用小波包变换压缩地震数据,有效信号的损失非常小,压缩比大于快速傅里叶变换的压缩比。在大批量地震数据处理中可以使用小波包变换压缩地震数据。     

A highly efficient novel azimuthal heliotrope

A new type of a single-axis azimuthal tracker is presented. The novel feature of this tracker is the ability to move the collector’s plane in two directions through a special support structure. This structure consists of a sliding mechanism on the central axis and a curved window on the cylindrical surface coaxial to the central axis. Consequently, the proposed novel heliotrope behaves similarly to a two-axis tracker. Two different windows designed on the cylindrical surface may be used to provide very high efficiencies throughout a year. Several performance measurements have been conducted on this novel tracker, a polar tracker and the reference two-axis tracker. Pyranometers, appropriately calibrated, were installed on all three systems to record the global incoming irradiance on the collector’s plane. It is shown that the new tracker system can be very efficient since its plane intercepts, at least, 98% of the insolation with respect to a two-axis tracker. The proposed system can be utilized in solar-related applications (photovoltaic or thermal).     

高分辨率合成孔径雷达图像舰船检测方法

寻找针对高分辨率SAR图像的舰船目标检测算法。利用KSW双阈值分割技术，其效果比传统检测方法好，有利于进一步的目标分类和识别。且必须根据SAR图像分辨率来选择舰船检测算法。     

喷墨打印相纸及打印图像质量的分析

喷墨打印相纸随着数码相机的发展近几年在国内发展迅速。针对目前产品质量没有测量标准的现状,提出喷墨相纸的质量指标主要为4个,即白度、光泽度、油墨吸收性和防水性。给出了相应的测量方法。并指出相纸上油墨点的面积是衡量质量的第一重要指标,其次是点的圆度。另外对图像输出的质量介绍了一种科学的评价方法,即图像的逼真性分析。说明图像的打印墨点直径不应小于方形像素的对角线长,图像才能真实再现。