FAFFA加速的PO-MM研究复杂金属载体上线天线电磁特性

本文提出了一种快速远场近似(FAFFA)加速的混合物理光学矩量法(POMM),利用FAFFA加速计算矩阵方程中的矩阵矢量积,明显提高了计算效率.对物体表面上的远场组之间的耦合作用推导出了一组简洁的计算公式,并分析了计算复杂度.复杂金属组合体上线天线输入导纳、互导纳和方向性图的计算结果与文献结果一致.利用该方法分析计算了一个舰船模型上线天线的电磁特性.数值结果表明了这种方法的正确性和工程应用中的有效性.     

Experiences with a parallel algorithm for data flow analysis

We have designed a family of parallel data flow analysis algorithms for execution on distributed-memory MIMD machines, based on general-purpose, hybrid algorithms for data flow analysis [Marlowe and Ryder 1990]. We exploit a natural partitioning of the hybrid algorithms and explore a static mapping, dynamic scheduling strategy. Alternative mapping-scheduling choices and refinements of the flow graph condensation used are discussed. Our parallel hybrid algorithm family is illustrated on Reaching Definitions, although parallel algorithms also exist for many interprocedural (e.g., Aliasing) and intraprocedural (e.g., Available Expressions) problems [Marlowe 1989]. We have implemented the parallel hybrid algorithm for Reaching Definitions on an Intel iPSC/2. Our empirical results suggest the practicality of parallel hybrid algorithms.An earlier version of this paper was presented at Supercomputing '90.The research reported here was supported, in part, by the New Jersey Commission on Science and Technology and the CAIP Center's Industrial Members, by Siemens Research Corporation and by National Science Foundation grant CCR-8920078.     

基于混合遗传算法的树状注水管网拓扑优化

以投资最小为目标函数,以井间隶属关系的惟一性、连接注水井数量等限制为约束条件,建立了树状注水管网拓扑优化数学模型.根据模型特点,将优化问题分为分配层和几何层,分别采用遗传算法和非线性优化方法进行求解.并对遗传算法的操作过程进行了改进,调整了适应函数,采用随机多父辈适应函数值加权交叉和多种变异操作,结合了模拟退火算法,并给出了初温的确定方法,改进了选择复制操作,从而形成了混合遗传算法.该算法能够有效地提高收敛速度,避免早熟收敛.利用算例说明了该方法的有效性.     

Sol-gel preparation of a di-ureasil electrolyte doped with lithium perchlorate

Solid polymer electrolytes (SPEs) synthesized by the sol-gel process and designated as di-ureasils have been prepared through the incorporation of lithium perchlorate, LiClO₄, into the d-U(2000) organic-inorganic hybrid network. Electrolytes with lithium salt compositions of n (where n indicates the number of oxyethylene units per Li⁺ ion) between ∞ and 0.5 were characterized by conductivity measurements, cyclic voltammetry at a gold microelectrode, thermal analysis and Fourier transform Raman (FT-Raman) spectroscopy. The conductivity results obtained suggest that this system offers a quite significant improvement over previously characterized analogues doped with lithium triflate [S.C. Nunes, V. de Zea Bermudez, D. Ostrovskii, M.M. Silva, S. Barros, M.J. Smith, R.A. Sá Ferreira, L.D. Carlos, J. Rocha, E. Morales, J. Electrochem. Soc. 152 (2) (2005), A429]. “Free” perchlorate ions, detected in all the samples examined, are identified as the main charge carriers in the sample that yields the highest room temperature conductivity (n = 20). In the di-ureasils with n ≤ 10 ionic association is favoured and the ionic conductivity drops.     

利用UTD修正的MoM-PO混合算法研究

介绍了利用矩量法(MoM)和物理光学(PO)混合方法处理复杂线体结构的电磁散射问题，提出利用pulse基函数对线电流进行展开，使得处理复杂线体结构问题变得简化，并推导出一般的矩阵方程。然后针对PO在阴影区域失效等问题，利用UTD(一致性几何绕射)对该简化模型结构下的PO区域电流进行了修正，使得其应用范围得到扩展、计算精度得到提高。文中的实例结果与传统的MoM很好的一致，从而说明了该方法的有效性和精确性。     

DSP技术在液压混合动力汽车能源控制方面的应用

文章分析了液压混合动力汽车的发展趋势,简述数字信号处理器(DSP)作为控制器的优势和DSP作为控制器对并联式混合动力液压车的能源控制的工作原理,给出了能源控制系统DSP信号流程图和主程序流程图。测试结果表明,DSP能源控制系统能够比较精确的对液压混合动力车的能量消耗与分配进行控制,具有很好的应用前景。     

基于PTFE的PCB的多层层压方法

介绍了采用不同材料类型的粘结膜、半固化片、所需设备和粘结材料,用于生产低到高层数的PTFE多层板的情况。     

Numerical Study of Scale Effects of Ultra-Thin Nickel Beams

Recent experiments have shown that metallic materials display significant size effects when the characteristic length scale of non-uniform plastic deformation is close to a micron. Couple stress plasticity has been developed to explain such phenomena by Fleck and Hutchinson. The mechanical behaviors of ultra-thin nickel beams in different boundary conditions were studied with the hybrid element developed for couple stress plasticity before. Strong scale effects are found when the beam's thickness is close to the material characteristic length scale. Such phenomena will disappear if the beam' s thickness is greatly larger than the material characteristic length scale. The scale effect is the beams inherent property and it does not change with the change of support conditions.     

In-Situ Wet Chemical Composition of Multicomponent Precursors to Blue Emitting Sr2CeO4 Phosphors

Hybrid precursors were assembled with cerium coordination polymers, polyethyl glycohol (PEG), SrCO3 and other functional components using a modified in-situ chemical polymeric gel technology. The hybrid precursors were calcinated to achieve the Sr2CeO4 phosphors, whose particle sizes were in the range of micrometer by XRD and SEM. The photoluminescence spectra indicate that the phosphors present a strong blue emission.     

A Multi-Objective Hybrid Genetic Based Optimization for External Beam Radiation

A multi-objective hybrid genetic based optimization algorithm is proposed according to the multi-objective property of inverse planning. It is based on hybrid adaptive genetic algorithm which combines the simulated annealing, uses adaptive crossover and mutation, and adopts niched tournament selection. The result of the test calculation demonstrates that an excellent converging speed can be achieved using this approach.