大气电场倒转与突发钠层及突发E层的相关性

突发钠层(Sporadic Sodium Layer, Na_S)是中高层大气金属层最为显著的一种现象,其发生机制目前尚无定论。突发E层(Sporadic E layer, E_S)是等离子体密度异常增大的薄层,被认为与Na_S密切相关。为进一步研究Na_S及E_S事件之间相关性及影响因素,利用中国科学院“子午工程”2010～2018年合肥科大站宽带钠荧光共振激光雷达观测结果,并结合武汉左岭镇站数字测高仪及九峰站大气电场仪数据,分析大气电场倒转(即北向电场)对Na_S以及E_S事件的影响。在统计的91例Na_S事件中,发生于大气电场倒转时的比例为20/91; 同时,在发生Na_S事件的事例中,E_S消失或中断的比例较大(14/20),表明E_S可能以提供钠源的形式转化为Na_S。此外,在分析武汉左岭镇站数字测高仪数据的同时进行概率统计,结果表明:当大气电场倒转时,E_S临界频率减小甚至消失的概率较大(187/242),少数情况下可能造成临界频率增大甚至激发E_S生成(55/242); E_S虚高消失比例为179/242,E_S不变比例为27/242,E_S上升比例为23/242。综上所述,大气北向电场在一定程度上对E_S事件的发生有抑制作用,并对E_S事件的发生高度有明显影响。最后,对一种与电场倒转相关的突发钠层机制也进行了讨论。     

RE型活化剂对氮碳共渗渗层性能的影响

研究了RE 型活化剂对45#、40Cr钢氮碳共渗的渗层硬度及深度的影响。结果表明:RE 型活化剂使渗层硬度和深度都得到了很大提高。     

A panoramic view of Li7P3S11 solid electrolytes synthesis,structural aspects and practical challenges for all-solid-state lithium batteries

The development of an inorganic electrochemical stable solid-state electrolyte is essentially responsible for future state-of-the-art all-solid-state lithium batteries (ASSLBs). Because of their advantages in safety, working temperature, high energy density, and packaging, ASSLBs can develop an ideal energy storage system for modern electric vehicles (EVs). A solid electrolyte (SE) model must have an economical synthesis approach, exhibit electrochemical and chemical stability, high ionic conductivity, and low interfacial resistance. Owing to its highest conductivity of 17 mS·cm^-1, and deformability, the sulfide-based Li₇P₃S₁₁ solid electrolyte is a promising contender for the high-performance bulk type of ASSLBs. Herein, we present a current glimpse of the progress of synthetic procedures, structural aspects, and ionic conductivity improvement strategies. Structural elucidation and mechanistic approaches have been extensively discussed by using various characterization techniques. The chemical stability of Li₇P₃S₁₁ could be enhanced via oxide doping, and hard and soft acid/base (HSAB) concepts are also discussed. The issues to be undertaken for designing the ideal solid electrolytes, interfacial challenges, and high energy density have been discoursed. This review aims to provide a bird's eye view of the recent development of Li₇P₃S₁₁-based solid-state electrolyte applications and explore the strategies for designing new solid electrolytes with a target-oriented approach to enhance the efficiency of high energy density all-solid-state lithium batteries.     

Effect of heat treatment on the microstructure and hardness of C-Cr-W-Mo-V-RE Fe-based hardfacing layer

0IntroductionHot-rollers and scissors are the critical parts of thesteel rolling equipments.At present,the surface soften-ing,the early wearing and the tearing are the primary rea-sons for the lowservice life of the hot-rollers and scissors.Although hardfacing has been applied to repaire the partseasily being worn and torn,such as the hot-rollers and thescissors,and has been obtained economic benefits[1-3],this technology has common problem:if the hardfacing lay-er contains more excessive allo…     

不锈钢表面超薄铜层的激光熔覆

采用ＣＯ２激光器在３１６Ｌ不锈钢表面获得了超薄的铜熔覆层,文中分析和讨论了激光熔覆工艺参数加激光功率,熔覆速度,离焦量以及送粉率等对熔覆层质量的影响,提出了熔覆工艺的优化方法,使铜层的熔覆厚度可控制在１００μｍ之内,稀释率小于１０％以及很小的热变形。     

4Cr14Ni14W2Mo钢排气阀离子氮化和离子软氮化渗层的分析和探讨

研究了经不同加热温度鍛造、固溶和750℃时效后钢的晶粒度、孪晶、滑移及碳化物的分布;用光镜、扫描电镜、X-射线衍射仪、俄歇谱仪对钢的基体组织、渗层组织、剥落形貌、应力状态及渗层C、N分布分析表;合适的固溶处理是可以消除过热锻造危害的;离子软氮化中,碳并没有渗入;适当降低炉气中氮含量和辉光电流密度及适当提高氮化温度是消除氮化产生剥落的途径之一。     

Electron beam welding of Re and BT5-1 titanium alloy

Based on the binary alloy phase diagram of Re-Ti, the weldability of Re and BT5-1 titanium alloy was analyzed. Using two methods of direct electron beam welding （EBW-D） and intergradafion electron beam welding （EBW-I）, Re and BT5-1 was welded. Experimental results show that the joint figuration of EBW-D between Re and BT5-1 is not fine, and the joint is inclined to brittleness rupture. The joint figuration of EBW-I between Re and BT5-1 is fine. No cracking and other disfigures occur in the intergradation joint. The element distribution of Re, Me, and Ti in the weld metal is progressional diversification.     

Study on the machinability of resulfurized composite free-cutting steels

The machinability of S, S-Ca, S-RE, and S-RE-Ca system resulfurized composite free-cutting steels were investigated, where RE is rare earths, mostly cerium. The experimental results showed that in the low cutting speed range (≤35 m/min), the S-RE system free-cutting steel had better machinability than the others and that the S-RE-Ca system free-cutting steel exhibited the best machinability at high cutting speeds. A protective layer capable of preventing diffusion wear was formed on the rake face of a P30 tool when S-RE-Ca system free-cutting steel was machined in the cutting speed range of 120 to 160 m/min.     

高温W/Re流口复合界面上的扩散层

W/Re流口在高温下使用时,复合界面处会发生反应扩散而形成一个由固溶体(W),双相σ,双相x,固溶体(Re)4个相组成的过渡层。并作出了不同反应扩散时间的浓度分布曲线,及浓度突变形成的双相区,从而确定了各相成份组成。对经反应扩散后的复合界面进行微观观察发现x相、σ相内有许多间隔式微裂纹,据此认为高温下W/Re流口失效原因是使用过程中上述两x,σ相内裂纹扩散,熔体渗入所致。     

硬质合金堆焊层经热处理后的耐磨性研究

对B、C、N共渗层、碳化钨型硬质合金(D707)堆焊层、高碳高铬铸铁型硬质合金(D618)堆焊层等几种不同表面处理工艺,经相应热处理后的腐蚀磨损性能进行了研究。结果表明,两种硬质合金堆焊层经850 ℃空冷、850±5 ℃油淬+400 ℃回火后,均具有较高的硬度和优异的耐腐蚀磨损性能,且简化了表面处理工艺。