建筑设备监控系统及节能

介绍了建筑设备监控系统(楼宇自动化系统)基本构成和功能,从而指出其节能的内涵。     

环氧玻璃钢衬里在化工设备中的应用

本文叙述了非标准化工设备的环氧玻璃钢防腐衬里工艺、配方及使用考查结果．     

内燃机车临时补水设备的设计与应用

针对内燃机车“途中缺水”故障 ,设计并安装临时补水设备 ,解决了电化区段临时补水的问题 ,满足了内燃机车“不停车、不停机”即可补水的要求。     

Effects of Process Conditions on Desalting and Demetalization of Crude Oil

The efficiency of desalting for six crude oils was studied with a SY-1 dynamic simulation experimental installation. The demulsifier DC2 was examined for 1#, 2#, and 4# crude oil and DC4 was used for 3#, 5#, and 6# crude oil. The effects of temperature, electric field gradient, dosage of demulsifier, and washing water on the desalting efficiency of six crude oils were investigated. The results showed that at the optimization process condition after desalting, the desalting efficiency and the salt content of 1# crude oil reached 89.17% and 1.92 mg/L; that of 2# crude oil reached 85.08% and 1.04 mg/L; that of 3# crude oil reached 91.06% and 1.35 mg/L; that of 4# crude oil reached 81.67% and 1.51 mg/L; that of 5# crude oil reached 81.03% and 2.32 mg/L; and that of 6# crude oil reached 86.64% and 2.67 mg/L. Different crude oils have different metal contents. Three assistants, ammonium nitrate (TJ1), nitric acid (TJ3), and polyamine carboxylate (TJ4), were used to improve the efficiencies of desalting and demetalization of six crude oils. TJ4 was more efficient in removing calcium and iron for 1# and 2# crude oil. TJ1 was more efficient in desalting and demetalizing 5# crude oil. The efficiencies for removal of calcium, iron, nickel, and vanadium respectively reached 99.89%, 98.33%, 20.58%, and 43.02%. TJ3 has better efficiency desalting and demetalizing for 6# crude oil. With the concentration of TJ3 increasing from 0 to 80 mg/L, the desalting efficiency increases from 31.22% to 73.54%, and the iron removal efficiency increases from 56.0% to 74.05%.     

基础锚栓预埋加固方案

结合工程实例 ,介绍轻钢结构系统基础锚栓预埋、加固解决方案 ,并介绍了加固系统的制作及使用方法 ,可供工程人员参考     

点检定修在实际应用中的初步探讨

介绍点检定修在发电厂中的应用，根据十里泉发电厂设备维修的经验提出点检定修向状态检修过渡的方法。     

“Biaxiality Effect” on the Energy Dissipated by Elastoplastic Base-Isolators

A plane elastic-plastic solid body presenting kinematic hardening is used to simulate a pair of dampers at the base of a rigid structure and determine the energy dissipation under conditions of assigned, homogeneous cyclic loading. The well-known von Mises theory of plasticity is applied with the aim of obtaining analytical solutions to the problem. Such solutions are arrived at by first calculating the Odqvist parameter, which yields dimensionless relations that depend on the external loads and mechanical properties of the material. The results, in terms of dissipated energy, are given for the case of a sinusoidal process, represented with the help of dimensionless parameters useful for engineering applications.     

SDH光通信设备工程测试

结合实际介绍了SDH光通信设备工程测试项目和测试方法，及相关的技术指标，包括平均发送光功率测试、接收机灵敏度测试、接收机过载功率测试、误码测试、抖动和漂移测试、定时同步测试、保护倒换测试、开销和维护信号测试、网管功能测试等。     

连铸转炉钢包电力牵引车的研制

论述研制连铸转炉钢包牵引车的目的、意义、方案的选择及设计计算校核,对技术要点作出了明确阐述.     

非无线电设备的无线电波辐射

介绍了电磁辐射的分类和非无线电辐射造成的各种危害，指出了可能产生电磁辐射的设备，给出了几种特殊情况的辐射值，并结合国际标准和国家标准，分析了电磁干扰的管理现状，最后提出了减少非无线电设备电磁辐的几种方法。