Influence of grain boundary weak links on the nonequilibrium response of YBaCuO thin films to short laser pulses

The transient voltage response in both epitaxial and granular YBaCuO thin films to 80 ps pulses of YAGNd laser radiation of wavelength 0.63 and 1.54 m was studied. In the normal and resistive states both types of films demonstrate two components: a nonequilibrium picosecond component and a bolometric nanosecond one. The normalized amplitudes are almost the same for all films. In the superconducting state we observed a kinetic inductive response and two-component shape after integration. The normalized amplitude of the response in granular films is up to five orders of magnitude larger than in epitaxial films. We interpret the nonequilibrium response in terms of a suppression of the order parameter by the excess of quasiparticles followed by the change of resistance in the normal and resistive states or kinetic inductance in the superconducting state. The sharp rise of inductive response in granular films is explained both by a diminishing of the cross section for current percolation through the disordered network of Josephson weak links and by a decrease of condensate density in neighboring regions.     

A kinetic model for gas adsorption at solid surfaces by surface transient formation

In this paper is presented a model for the kinetics of gas adsorption at solid surfaces, in which transient formation is involved. In the case of ideal adsorption where the rate constants are independent of the surface coverages, the kinetics can be solved exactly in the framework of the first order kinetic law. The expression of the sticking coefficient for the final chemisorbed state is obtained in terms of the rate constants introduced in the model and compared to the expression commonly adopted in the literature. By means of a fitting procedure the kinetics were used to describe experimental data on the dioxygen adsorption at the Zn(0001) surface. An appropriate analysis of the fitting parameters, derived from adsorption data collected at different temperature of the substrate, allows for the activation energy of the processsurface transient final adsorbed species to be estimated.     

Methane coupling at low temperatures on Ru(0001) and Ru(11¯20) catalysts

The conversion of methane to higher hydrocarbons on single crystal Ru catalysts has been investigated using combined elevated-pressure kinetic measurements/surface science studies. The reaction consists of activation of methane on Ru(0001) and Ru(11¯20) surfaces to produce carbonaceous intermediates at temperatures between 350 and 700 K and rehydrogenation of these species to ethane and propane at 370 K. It is found that under the reaction conditions employed, the maximum yield in ethane/propane production occurs at 500 K on both surfaces. Influence of the hydrogenation temperature on the production of ethane and propane is also examined. On Ru(0001), the yields of ethane and propane maximize at = 400 K, whereas no maximum yield was observed on Ru(11 0) in the 300–500 K temperature range. Under optimum reaction conditions, hydrocarbon products consist of 16% ethane and 2% propane. High-resolution electron energy-loss spectroscopy (HREELS) has been used to identify various forms of hydrocarbonaceous intermediates following methane decomposition. An effort is made to relate the hydrocarbon intermediates identified by HREELS to the gas phase products observed in the elevated pressure experiments.     

Prediction of color changes in acetaminophen solution using the time–temperature superposition principle

A prediction method for color changes based on the time–temperature superposition principle (TTSP) was developed for acetaminophen solution. Color changes of acetaminophen solution are caused by the degradation of acetaminophen, such as hydrolysis and oxidation. In principle, the TTSP can be applied to only thermal aging. Therefore, the impact of oxidation on the color changes of acetaminophen solution was verified. The results of our experiment suggested that the oxidation products enhanced the color changes in acetaminophen solution. Next, the color changes of acetaminophen solution samples of the same head space volume after accelerated aging at various temperatures were investigated using the Commission Internationale de l’Eclairage (CIE) LAB color space (a*, b*, L* and ΔE*ab), following which the TTSP was adopted to kinetic analysis of the color changes. The apparent activation energies using the time–temperature shift factor of a*, b*, L* and ΔE*ab were calculated as 72.4, 69.2, 72.3 and 70.9 (kJ/mol), respectively, which are similar to the values for acetaminophen hydrolysis reported in the literature. The predicted values of a*, b*, L* and ΔE*ab at 40?°C were obtained by calculation using Arrhenius plots. A comparison between the experimental and predicted values for each color parameter revealed sufficiently high R² values (>0.98), suggesting the high reliability of the prediction. The kinetic analysis using TTSP was successfully applied to predicting the color changes under the controlled oxygen amount at any temperature and for any length of time.     

特种电动机高压阀门准确制动的仿真计算

对于特种异步电动机拖动的高压阀门 ,切断电动机交流供电电源后 ,在电机的定子绕组中通入适当的直流电流 ,产生直流磁场 ,使电机进行能耗制动 ,让阀心和电机转子的能量 ,包括动能消耗在转子的绕组中 ,达到准确停车的目的。介绍了这一过程的计算机仿真计算     

4,4’-二氨基二苯砜固化环氧树脂/蒙脱土纳米复合材料反应动力学的研究

选择4,4’-二氨基二苯砜（DDS）作为固化剂,采用非等温DSC法研究了双酚A缩水甘油醚型环氧树脂（E-51）/有机蒙脱土（MMT）纳米复合材料的固化反应动力学,根据Kissinger方程计算出该反应的表观活化能（ΔE）为59.91 kJ/mol,基于Crane方程计算得到该反应的反应级数为0.89,表明该反应为一复杂反应,根据固化反应动力学测试结果确定了E-51/DDS/MMT体系固化成型工艺.     

改性沸石对水溶液中甲基橙的吸附动力学研究

以氢氧化镁改性沸石为吸附剂,研究了其对水溶液中甲基橙的吸附性能.用准一级和准二级动力学、Elovich、粒子扩散及Fick动力学等方程对不同浓度、吸附时间的吸附曲线进行分析,研究了其吸附动力学机理.结果表明:改性沸石吸附甲基橙是复杂的非均相扩散的化学吸附过程,吸附过程由膜扩散和粒子内扩散联合控制,并通过Fick方程计算了吸附过程的有效扩散系数.     

羧基修饰的吸附树脂对1,2-苯并异噻唑-3-酮(BIT)的吸附研究

采用偏苯三甲酸酐、均苯四甲酸酐修饰氯甲基化的低交联大孔聚苯乙烯-二乙烯苯制备的超高交联吸附树脂(分别命名为ZT3和ZT4),通过比表面及孔径分析对其结构进行表征。以Amberlite XAD-4树脂作参照,通过等温吸附实验和吸附动力学实验探讨了修饰后的树脂对水溶液中BIT的吸附性能和机理。结果表明:ZT3、ZT4修饰的树脂比Amberlite XAD-4树脂对水溶液中BIT具有更好的吸附效果,这主要归因于树脂的微孔面积、高比表面积和树脂表面的羧基,Langmuir和Freundlich方程均能较好拟合修饰树脂对BIT的吸附等温线。BIT在ZT3和ZT4树脂上的吸附量都是随着溶液pH的增大而减小。     

化学-酶法动态动力学拆分外消旋仲醇研究进展

介绍了外消旋仲醇动态动力学拆分的反应原理及金属配合物、酸性沸石催化仲醇消旋化反应的机理,论述了近年来过渡金属配合物催化剂、酸性催化剂与固定化脂肪酶结合,进行仲醇动态动力学拆分反应的研究进展。     

Mn2+掺杂对LiFePO4正极材料结构、性能及嵌锂动力学的影响

为了改善橄榄石型LiFePO4正极材料的性能,采用高温固相法合成了Mn掺杂的LiMnxFe1-xPO4(x=0,0.10,0.25,0.40,0.50)材料.采用X射线粉末衍射、扫描电子显微镜、充放电测试、循环伏安和电化学阻抗谱研究了材料的结构、电化学性能和锂离子嵌脱动力学.结果表明,锰掺杂的LiFePO4样品颗粒分布比较均匀,具有较小的平均粒径和窄的粒度分布,LiMnxFe1-xPO4是纯相的橄榄石结构.在不同倍率下,LiMn0.4Fe0.6PO4具有最高的放电容量和最好的动力学性能.Mn的掺杂提高了LiFePO4材料的可逆性、锂离子扩散系数和放电容量,减小了电荷转移电阻,进而提高了其动力学性能.