考虑纤维波动[＋φ／-φ]缠绕角管件的轴向弹性模量计算方法

本文在计算[ φ/-φ]缠绕角管件的轴向弹性模量时,通过引入纤维波动程度参数来计入纤维波动的影响,理论计算结果与层板理论计算结果相比更接近实验结果,说明本文提出的算法,可在一定程度上计入纤维波动的影响。     

复合材料纤维缠绕成型CAD/CAM相关技术研究

纤维缠绕成型是制造高强度复合材料制品的一种重要的工艺方法，将CAD／CAM方法应用其中可以大大提高生产效率，降低设计成本。本文提出了纤维缠绕CAD／CAM系统的总体方案，并对其中缠绕数学模型、线型优化、丝嘴轨迹生成等量要组成部分进行了分析与研究，为CAD／CAM系统的开发奠定了理论基础。     

The Effects of Phenyltrimethoxysilane Coupling Agents on the Properties of PTFE/Silica Composites

A study on PTFE reinforced with SiO₂ was described. This study included the manufactural process of SiO₂-reinforced PTFE and the effects of the content of silane (Z6124) on the properties of the composites material, such as thermal, dielectric properties, tensile strength and morphology, etc. PTFE/silica composites of 60 wt% SiO₂ loaded with a different coupling agent content were mixed by a high-speed dispersion machine and prepared by a two-roll milling machine. Our results show that the sample treated with 3 wt% silane has the highest tensile strength and optimum dielectric properties. Furthermore, the tensile strength and coefficient of thermal expansion (CTE) increase, and the water absorption decreases, with an increasing silane content. These experiments reveal that silane treatment can reduce the overall hydrophilicity of the composites. Finally, predictions on dielectric and CTE properties are discussed. It has been found that experimental values of the dielectric constant agree well with those predicted by the rule of mixture.     

改性木粉/PVC复合材料的研究进展

概述了PVC木塑复合材料的发展和背景与性能。简述了木质材料的性质和木粉改性的方法,如物理方法和化学方法。介绍了木塑复合材料的生产流程、成型方法(模压成型、挤出成型、注射成型及其成型设备,讨论了对工艺参数的一些要求。指出目前国内PVC木塑复合材料发展存在的一些问题,并指明了PVC木塑复合材料的应用前景。     

我国CTP技术应用的现状和前景

代表当今印刷制版业潮流的CTP技术的应用,在欧、美等地区发达国家得到快速普及。我国CTP技术的应用随着我国经济的发展,越来越被印刷制版界所接受,到目前为止,我国有400多台CTP机投入使用。随着CTP技术的进一步完善、成熟,CTP机价格的下调、国产CTP版材的大量投放市场,我国将有更多的印刷制版厂应用CTP技术。     

(Ag)_核·(Au)_壳复合纳米粒子的制备

以银原子团簇作晶种,采用微波高压液相合成法制备了分散性好、规则球形的(Ag)核·(Au)壳复合纳米粒子。研究了(Ag)核·(Au)壳复合纳米粒子的紫外可见吸收光谱和共振散射光谱特性。结果表明,液相(Ag)核·(Au)壳复合纳米粒子和高压微波合成的液相金纳米粒子的最强共振散射峰均在580nm处,它们的吸收光谱图相似,最大吸收分别在518.5nm和524.8nm。     

Humidity sensitivity of polypyrrole and polypyrrole/SBA‐15 host–guest composite materials

Polypyrrole (PPY) and PPY/SBA‐15 host–guest composite materials have been prepared using chemical synthesis route and characterized by XRD, IR, N₂ adsorption–desorption isotherms, and SEM. The humidity sensitive properties (HSP) of this kind of materials have been studied by analyzing the variation curve of impedance as a function of relative humidity. It was found that the PPY/SBA‐15 host–guest composites materials exhibit better HSP than that of the corresponding pure PPY. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3301–3305, 2006     

Mechanical,flow, and morphological properties of talc‐ and kaolin‐filled polypropylene hybrid composites

Polypropylene (PP) hybrid composites have been produced by compounding two types of mineral fillers, viz., talc and kaolin with PP copolymer using a twin screw extruder. The PP hybrid composite was injection‐molded into dumbbell specimen for tensile, flexural, and impact properties characterizations. MFI and SEM studies were used to characterize the flow and morphological properties of the PP hybrid composites. The result shows that most of the hybrid composites showed a significant decrease in flow, tensile, flexural, and impact properties compared with the single filler‐filled PP composites. However, a hybridization effect was seen for the PPT20K10 hybrid composites, through the synergistic coalescence of positive characteristics from 20 wt % of talc and 10 wt % of kaolin. This hybrid formulation have given an economically advantageous material with the mechanical properties (tensile, flexural, and impact) comparable to those of the talc‐filled PP composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 434–441, 2007     

复合型热塑性工程塑料的进展

对复合型热塑性工程塑料制造技术、特性、应用情况和发展趋势进行了较全面的评述，对发展我国工程塑料产业提出了若干建议。     

改性低毒脲醛树脂的合成及性能研究

采用六亚甲基四胺做催化剂，加入聚乙烯醇（PVA）、三聚氰胺和硫脲作为改性剂，通过降低甲醛与尿素物质的量比、采用尿素分批加入的合成方法，制备出改性低毒的脲醛树脂（UF），使游离甲醛质量分数低于0．30％；采用捏合和模压成型方法，将改性和普通UF树脂分别与剑麻纤维（SF）制备UF／SF共混复合材料，研究了复合材料的力学性能和吸水性能。结果表明，甲醛和尿素物质的量比为1．1时，游离甲醛质量分数降低到0．16％；甲醛和尿素物质的量比为1．2时，三聚氰胺、PVA及硫脲加入量分别为尿素总量的2．0％，1．5％，1．0％（质量分数）时，游离甲醛质量分数降低到了0．10％，粘度达到0．41Pa·S，贮存期大于80d；改性UF／SF复合材料的性能比普通UF／SF复合材料的冲击性能和耐磨性能分别提高了114％和261％。