大规模集成电路浮栅ROM器件总剂量辐射效应

提出了一种大规模集成电路总剂量效应测试方法:在监测器件和电路功能参数的同时,监测器件功耗电流的变化情况,分析数据错误和器件功耗电流与辐射总剂量的关系.根据该方法利用60Co γ射线进行了浮栅ROM集成电路(AT29C256)总剂量辐照实验,研究了功耗电流和出错数量在不同γ射线剂量率辐照下的总剂量效应,以及参数失效与功能失效时间随辐射剂量率的变化关系,并利用外推实验技术预估了电路在空间低剂量率环境下的失效时间.     

大空域机动巡航导弹的模糊PID控制器设计

针对大空域机动巡航导弹下降转平飞过程中出现的强非线性特点．在俯仰通道设计了模糊PID双模控制方案。以高度误差和该误差变化量为输入．以高度误差为阀限．在高度误差较大时采用响应迅速的模糊控制器．较小时采用稳态精度较高的PID控制器。最后通过仿真表明通过该方案所控制的弹道符合方案弹道．满足设计指标要求。     

创建FTP服务器和设计磁盘配额的方法与实现

FTP是网络系统提供的基本服务之一．用户可以通过FTP上传和下载文件。本文介绍Linux系统的FTP服务器的原理以及建立FTP服务器和对FTP用户的磁盘配额进行设置。     

On the design of multiple key hashing files for concurrent orthogonal range retrieval between two disks

This paper concerns the following problem: given a set of multi-attribute records, a fixed number of buckets and a two-disk system, arrange the records into the buckets and then store the buckets between the disks in such a way that, over all possible orthogonal range queries (ORQs), the disk access concurrency is maximized. We shall adopt the multiple key hashing (MKH) method for arranging records into buckets and use the disk modulo (DM) allocation method for storing buckets onto disks. Since the DM allocation method has been shown to be superior to any other allocation methods for allocating an MKH file onto a two-disk system for answering ORQs, the real issue is knowing how to determine an optimal way for organizing the records into buckets based upon the MKH concept.

A performance formula that can be used to evaluate the average response time, over all possible ORQs, of an MKH file in a two-disk system using the DM allocation method is first presented. Based upon this formula, it is shown that our design problem is related to a notoriously difficult problem, namely the Prime Number Problem. Then a performance lower bound and an efficient algorithm for designing optimal MKH files in certain cases are presented. It is pointed out that in some cases the optimal MKH file for ORQs in a two-disk system using the DM allocation method is identical to the optimal MKH file for ORQs in a single-disk system and the optimal average response time in a two-disk system is slightly greater than one half of that in a single-disk system.     

磷酸盐激光玻璃非激活吸收系数测量研究

介绍了高功率激光放大器系统中磷酸盐激光玻璃的静态透过率测量。在正常运行条件下,4片长按布儒斯特角放置的国产N31钕玻璃片对1.054um的激光波长平均静态透过率为94.5%,介质的损耗系数为0.294%cm-1,平均非激活吸收系数为0.146%cm-1。在此基础上对片状放大器的增益系数的测量结果进行了修正,获得了5.25%cm-1的小信号增益系数。     

大伙房水库输水工程隧洞结构应力仿真分析

应用有限元法对辽宁省大伙房水库输水工程主体隧洞结构进行了仿真分析,从而得到隧洞结构的应力分布规律,研究确定薄弱部位并采取相应的稳定措施,以便保证隧洞施工的安全与经济。     

Efficient and accurate waveguide mode computation using BI‐RME and Lanczos methods

In this paper, a special purpose algorithm for solving large eigenvalue problems based on the Lanczos method is successfully applied to an engineering problem: the electromagnetic analysis and design of passive waveguide devices. For dealing with such complex problems, the boundary integral‐resonant mode expansion (BI‐RME) technique has been recently proposed. This technique solves integral equations (IEs) through the well‐known method of moments (MoM), thus leading to structured eigenvalue problems. These problems frequently become very large when solving complex arbitrary geometries with high accuracy. In such cases, the eigenvalue problem cannot be efficiently solved with standard methods by means of personal computers, essentially due to CPU time and memory allocation requirements. In this paper, we propose an alternative technique, based on the Lanczos method, for the fast and accurate solution of large BI‐RME generalized eigenvalue problems. The novel theoretical aspects of this approach, as well as the impacton the original BI‐RME formulation, are described. Comparative benchmarks are also successfully presented for the full‐wave analysis and design of real passive microwave devices. Copyright © 2005 John Wiley Sons, Ltd.     

Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .     

刚性圆板自由落体在水面上的冲击压力

本文对一个刚性圆板自由落体在水面上的冲击过程建立了比较精确的理论模型,并建立了相应的数值格式。计算结果与已有的实验结果符合良好,通过计算进一步给出了下落质量和下落高度对冲击压力峰值的影响。