有限体积法求解立体角离散误差

为解决采用有限体积法求解辐射传输方程时引起离散误差的问题,从有限体积法立体角内热流密度的求解过程出发,运用泰勒级数推导了近似误差的表达式,并分析影响离散误差的各种因素,包括离散射线数,辐射强度分布,假散射及网格比.根据分析结果,采用辐射强度的连续分布模型,模拟了各种因素对误差的影响.结果表明,辐射强度的分布函数对于有限体积法的离散误差有一定程度影响.当增加网格数及减小网格尺寸比时,可以有效地减小离散误差.假散射与离散误差间呈较强的非线性耦合关系.     

Formation mechanism of subtrenches on cone-shaped patterned sapphire substrate

In this paper, the cone-shaped patterned sapphire substrates (PSS) were etched by an inductively couple plasma with BCl 3 as the reacting gas. The influence of the operating pressure and the RF bias power on subtrenches of the cone-shaped PSS and the formation mechanism of subtrenches were investigated. The profiles of patterns were characterized by FESEM (field emission scanning electron microscope). It showed that the subtrench size varied with the operating pressure and the RF bias power. As the operatin...     

Transitions from solid to liquid in isotactic polystyrene studied by thermal analysis and X-ray scattering

A three-phase model, comprising mobile amorphous fraction (MAF), rigid amorphous fraction (RAF) and crystalline fraction (C), has been applied to interpret the thermal transitions and structure of cold-crystallized isotactic polystyrene (iPS) from below the glass transition temperature, T_g, to above the melting point. Quenched amorphous iPS films were isothermally crystallized at different temperatures for 12 h. The fraction of crystalline phase, ?_c, was measured by differential scanning calorimetry (DSC), wide angle X-ray scattering and Fourier Transform infrared spectroscopy. The fraction of the mobile amorphous phase, ?_MAF, was obtained from the heat capacity increment at the glass transition temperature. In the three-phase model, the fraction of the rigid amorphous phase, ?_RAF, was found from 1−?_MAF−?_c. Specific heat capacity measurements by standard DSC confirm that the experimental baseline heat capacity conforms to a three-phase model for temperatures ranging from below T_g, up to the relaxation of RAF. The relaxation of RAF appears as a sigmoidal change in heat capacity accompanied by excess enthalpy, in which solid-like RAF is converted to an identical amount of liquid-like MAF.At temperatures above the relaxation of RAF, either one or two major crystal melting endotherms are observed in standard DSC, dependent upon crystallization temperature. However, using quasi-isothermal temperature modulated DSC, we always observed two reversing melting endotherms. The effects of annealing on iPS structure during the quasi-isothermal measurement were assessed using small angle X-ray scattering (SAXS). Combining the DSC and SAXS results, a model for the melting of iPS lamellae at low heating rates is presented.     

一种白光测速仪在热锯区域中的应用

阐述白光测速仪的工作原理及优缺点,介绍其在莱钢大H型钢生产线热锯区域的应用.     

Optical complexities of living cytoplasm--implications for live cell imaging and photo-micromanipulation techniques

The ability to manipulate the intracellular environment within living cells and to monitor the cytosolic chemical changes which occur during cell stimulation has lead to major advances in our understanding of how cells read and respond to their environment. Perhaps the most powerful suite of techniques for achieving these dual objectives is based on the use of light (photons). Because cells are 'transparent', light has been used to both interrogate and manipulate the chemistry inside living cells, exploiting technical advances in both the physical and biochemical sciences. However, cells are neither transparent nor homogeneous with respect to their optical properties. The interface between light and the living cell cytoplasm thus represent an important, yet largely ignored, interface. There has been no review of the optical properties of cytoplasm and little discussion about how the optical properties of living cytoplasm influence the outcome of such measurements and manipulations. In this short review, we discuss the importance of understanding the optical properties of cytoplasm for such techniques and how imperfections in experimental interpretation can arise.     

双基地海底散射SSA模型角度特性仿真研究

由海底散射引起的混响是影响双基地声纳性能的重要因素之一,为了通过合理配置双基地声纳各角度来减小海底散射对双基地声纳的影响,基于小斜度近似(SSA)理论,建立了双基地海底散射强度模型.给出了散射强度与双基地声纳各角度之间的关系式.仿真结果表明.海底散射强度与双基地声纳各角度配置关系复杂,随着各角度配置的不同,散射强度会有很大的变化,但在镜反射方向上取得最大值.小斜度近似在整个入射角范围内较为准确,是一种处理粗糙面声散射问题的好方法.     

Recent development and applications of an optical method for measurements of thermophysical properties

The experimental determination of thermophysical properties has been greatly improved by the introduction of laser technology. The laser beam is used for sensing and also for heating (or exciting) the specimen. The advantage of using a laser beam is most strongly felt in the measurement of the thermal conductivity or the thermal diffusivity, which are some of the most difficult properties to measure. Interesting features of new techniques for investigating various aspects of thermal conductivity in fluids and solids are reviewed. An optical method, the so-called forced Rayleigh scattering method, or the laser-induced optical-grating method, has been developed and used extensively by the present author's group. The method is a high-speed remote-sensing method which can also quantitatively detect anisotropy, namely, direction dependence of heat conduction in the material. It was used for determination of the thermal diffusivity and its anisotropic behavior for high-temperature materials such as molten salts, liquid crystals, extended polymer samples, and flowing polymer melts under shear. Interesting applications of the method were demonstrated also for thermal diffusivity mapping and microscale measurement.Invited paper presented at the Twelfth symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

A 2.20 eV Bandgap Polymer Donor for Efficient Colorful Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST-OSCs) have attracted increasing attention due to their promising prospect in building-integrated photovoltaics. Generally, efficient ST-OSCs with good average visible transmittance (AVT) can be realized by developing active layer materials with light absorption far from the visible light range. Herein, the development of ultrawide bandgap polymer donors with near-ultraviolet absorption, paired with near-infrared acceptors, is proposed to achieve high-performance ST-OSCs. The key points for the design of ultrawide bandgap polymers include constructing donor–donor type conjugated skeleton, suppressing the quinoidal resonance effect, and minimizing the twist of conjugated skeleton via noncovalent conformational locks. As a proof of concept, a polymer named PBOF with an optical bandgap of 2.20 eV is synthesized, which exhibited largely reduced overlap with the human eye photopic response spectrum and afforded a power conversion efficiency (PCE) of 16.40% in opaque device. As a result, ST-OSCs with a PCE over 10% and an AVT over 30% are achieved without optical modulation. Moreover, colorful ST-OSCs with visual aesthetics can be achieved by tuning the donor/acceptor weight ratio in active layer benefiting from the ultrawide bandgap nature of PBOF. This study demonstrates the great potential of ultrawide bandgap polymers for efficient colorful ST-OSCs.     

浅析“静中求动”的设计思维——以灯的“开”与“关”状态联想感悟事物的关联性、可变性

任何事物的存在都不是固定的状态和单一的形式,对事物的认识理解也不应是局限的、固有的,经验感知往往使我们对事物存在方式的认识受到限制,应在静中求动,通过关联性寻求可变因素。本文还通过对灯的"开"与"关"状态的联想为例,浅析"静中求动"认识事物的思维方法,"设计不是一个结论,而是一种假设,不是一种宣言,而是一种步骤、一个瞬间,这里没有确定性,只有可能性,没有真实性,只有经验性,没有那是什么,只有发生了什么",设计是实现作品与生活之间的一种可能性关系。