对索风营水电站坝址区堆积体勘察设计的几点认识

乌江索风营水电站坝址区分布有7个堆积体,其成因有崩塌堆积、蠕变-拉裂-崩解堆积、塌滑堆积及混和堆积等.在勘察过程中采用了地质测绘、钻探、硐探、物探、科研试验等多种勘察方法与手段,在勘察成果基础上对堆积体稳定性进行了分析,并结合对工程的不同影响提出了相应的工程处理措施.     

Strawberry juice colour: The effect of some processing variables on the stability of anthocyanins

The colour stability of juice and purées made from a mixture of two strawberry varieties, stored at + 20°C or at –20°C under aerobic and anaerobic conditions, was studied. High-performance liquid chromatography and spectrophotometric analysis were used to monitor the changes in colour during storage. Pelargonidin 3-glucoside comprised 80% of the total anthocyanin content. Four other pelargonidin-based peaks were found, being 10.4%, 3.5%, 0.7% and 0.3% of the total and two cyanidin peaks were present, being 3.3% and 0.4% of the total. Clarification before storage caused considerable losses in the initial anthocyanin concentrations. Storage conditions (air versus nitrogen) did not influence the rate of loss of anthocyanins during storage or the formation of polymeric pigments. There were no losses in anthocyanins and no increase in the amount of colour measured at 510 nm due to polymers in samples stored at–20°C. Polymerisation occurred in the samples stored at + 20°C, especially in the clarified samples.     

Storage stability of a high protein food beverage powder prepared from the Nigerian ‘red skin’ groundnut (Arachis hypogaea) protein concentrates

A high protein, groundnut-based powder reconstitutable into a milk-like beverage was packed in polyethylene bags and in lacquered tin cans, and stored at both room temperature (25 ± 2°C) and in a domestic refrigerator (5 ± 2°C) for 60 days. Storage stability was evaluated by analysing periodically for changes in physical characteristics, proximate composition, and development of browning and rancidity, and assessing moisture sorption characteristics. Protein, lipid, total soluble sugars, peroxide value, total carbonyls and extinction values of the ethanolic extract remained practically constant during storage. The isotherm curves exhibited the characteristic sigmoidal shape typical of high protein foods. There was a greater increase in density, hygroscopicity and wettability in polyethylene-packed samples at both temperatures suggesting that the lacquered tin can leads to better keeping quality for this product.     

痕量分析中金溶液的稳定性

评述了痕量分析中,金标准溶液和天然水试样中痕量金贮存的稳定性及影响贮存的重要因素,提出了标准溶液配制和贮存的方法。     

Synthesis and characterization of novel diimide–dinaphthols and resulting poly(urethane–imide)s

Novel diols containing imide groups were prepared via condensation of aromatic dianhydrides with 5‐amino‐1‐naphthol. The diimide–dinaphthols prepared were characterized by conventional methods and used to synthesize new poly(urethane–imide)s (PUIs). All the polymers were characterized and their physical properties, such as solubility, solution viscosity, thermal stability, and thermal behaviour were studied. The polymers obtained showed more thermal stability than typical polyurethanes because of the presence of the imide groups. Copyright © 2003 Society of Chemical Industry     

光纤码分多址技术在城域接入网中的应用

分析了光纤码分多址技术O -CDMA在城域接入网中的应用。回顾了O -CDMA技术的发展历史 ,详细地介绍了O -CDMA技术的特点 ,其具有的公平性、灵活性、网络控制管理、对服务区处理能力以及高的安全性使O -CDMA技术成为较好的城域接入网技术。阐述了目前在应用中O -CDMA存在的一些技术方面的问题     

Conducting composites of polythiophene and polyfuran with acetylene black

Conducting composites of polythiophene (PTP) and polyfuran (PF) with acetylene black (AB) were prepared via chemical oxidative polymerization of thiophene and furan in a suspension of AB in CHCl₃ at room temperature using anhydrous FeCl₃ as the oxidant. Formation of PTP and PF and their subsequent incorporation in PTP–AB and PF–AB composite systems were confirmed by FTIR analysis. Scanning electron microscope analysis showed the presence of compact clusters of particles in both composites. Transmission electron micrographs of PTP–AB and PF–AB composites showed formation of globular polymer encapsulated AB particles with average diameters of the order of ～100 nm in both systems. Thermogravimetric analysis revealed that the overall thermal stability varied in the order: AB > PTP–AB > PTP and AB > PF–AB > PF. DC conductivity values for the PTP–AB and PF–AB composites were of the order of 10^?2 and 10^?3 S cm^?1, respectively. Copyright © 2004 Society of Chemical Industry     

Emulsifying Capacity and Emulsion Stability of Soy Proteins Compared with Corn Germ Protein Flour

Both emulsifying capacity (EC) and emulsion stability (ES) increased with increasing concentrations from 0.4% to 0.8% of soy flour (SF), soy concentrate (SC), soy isolate (SI) and corn germ protein flour (CGPF) when studied by response surface methodology. EC and ES increased as pH increased from 6 to 8 in all samples. Increasing incubation temperatures of protein solutions from 20–70°C or from 4–20°C did not affect EC or ES, respectively. SF had the highest EC, followd by SI, SC, and CGPF.     

Adhesive Dispensing Process Analysis: Steady-State Dispensing of One-Component Adhesives

The process of dispensing one-component heat-cure adhesives was investigated in order to understand current application processes and to guide new process development. Typical one-component adhesives exhibit non-Newtonian rheological behavior, and hence Newtonian fluid mechanics does not adequately describe the dispensing process. In the present study, the adhesives were modeled as Bingham fluids possessing a yield stress and a steady state viscosity. The model of the dispensing apparatus includes four major flow sections connected in a serial configuration. The fluid mechanics equations derived for Bingham fluids in the individual flow sections were solved by numerical methods in order to understand the interrelationships between the material variables (e.g. yield stress, viscosity, temperature dependencies) and process variables (e.g. pressure, flow geometry, temperature, output). The concept of the model is generic and the details of the model can be modified for any forced-flow adhesive application process.

The adhesive flow properties significantly influence the process output. Dispensing temperature, among the process variables, has the strongest effect on process output. A ± 1.0·C perturbation in the dispensing temperature can cause as much as a 14% variation in the bead size for the range of adhesives studied. Differences in flow characteristics result in differences in processability and non-linear temperature/pressure sensitivity. The non-linear sensitivity can be eliminated by operating the dispensing process isothermally. Finally, the process limits for one-component adhesives, which are susceptible to chemical instability induced by viscous heating during processing, are defined and discussed in terms of a modified Brinkman number that takes into account viscous dissipation, heat conduction and convection, and chemical stability of the material during processing.