关于可分2－D系统的几个注记

可分２－Ｄ系统是一类具有良好特性的重要的特殊２－Ｄ系统，它在多方面均有重要的应用．本文在已有结果的基础上对具有可分性的２－Ｄ多输入多输出系统在再实现问题、渐近稳定性代数判据、状态观测器设计等方面进行了较为广泛的研究，得到了许多较好的结果．     

Stabilization of uncertain boundary control systems

We consider a class of linear infinite-dimensional systems subject to boundary uncertainties, which are linear and time-invariant. Using a deterministic approach to the design of stabilizing feedback controls, uniform exponential stability of the zero state is achieved. Lyapunov techniques are combined with Datko or Ichikawa theory. Three illustrative examples are presented.     

Unperturbed dimension of poly(4-acetoxystyrene) measured in good and theta solvents

In order to obtain the additional data concerning the unperturbed dimension of poly-4-substituted styrene, light scattering measurements are performed on the twenty-two fractions with molecular weight of (0.91–352)·10⁴ of poly(4-acetoxystyrene) in dioxan at 25°C, from which the molecular weight obtained was found easily to be evaluated with the gel permeation chromatography using THF. Phase separation experiments for this polymer indicate that the theta state is attained in isopropyl acetate at 19.7°C and butyl acetate at 26.8°C. By making viscosity measurements at that state, the value of K_Θ is directly evaluated as 5.4·10^?4 dl g^?1. The limiting viscosity number is also obtained in good solvents, THF and dioxan, at 25°C and constants of the Mark-Houwink-Sakurada equation in each solvent are determined. Further, approximately the same K_Θ as above is obtained from these data with the Stockmayer-Fixman plot. The calculated value of steric factor, 2.37, on this polymer may be plausible, compared with those of polyvinylaromatic derivatives.     

Critical-point drying versus freeze drying for scanning electron microscopy: a quantitative and qualitative study on isolated hepatocytes

Critical-point drying and freeze drying were compared both quantitatively and qualitatively as preparative procedures for scanning electron microscopy. Isolated hepatocytes were used as model cells. Nomarski differential interference contrast microscopy was used for light microscopic measurements of the hepatocytes in the unfixed, the glutaraldehyde fixed, the glutaraldehyde + OsO₄ fixed, the critical-point dried and the freeze dried states. Critical-point dried hepatocytes were found to shrink to 38% of glutaraldehyde + OsO₄ fixed volume, whereas optimal freeze dried hepatocytes (frozen in water saturated with chloroform and freeze dried at 183 K for 84 h) were found to shrink to 51% of glutaraldehyde + OsO₄ fixed volume. Transmission and scanning electron micrographs of the critical-point dried cells showed well-preserved ultrastructure and surface structure. Micrographs of the freeze dried cells showed ultrastructure destroyed by internal ice crystals and surface structure destroyed by external ice crystals. Double-fixed isolated hepatocytes were shown to swell during storage in buffer and to shrink during storage after critical-point drying. For low magnification scanning electron microscopy (up to about 3000 times) both critical-point drying and freeze drying can be used. However, for high magnification scanning electron microscopy, critical-point drying is superior to freeze drying.     

砂基中泥浆盾构法隧道施工开挖面稳定性试验研究

 通过模型试验，对泥浆盾构施工中泥浆维持开挖面稳定的力学机理，开挖面前缘土体的应力变化规律，泥浆压力作用机理及泥皮形态进行了研究，提出了中粗砂地基中临界泥浆压力 公式。     

用菱锌矿制取轻质氧化锌的研究

介绍了以菱锌矿为原料生产轻质氧化锌的方法，论述了反应酸浓度，煅烧温度，溶液PH值对实验的影响，并对生产工艺条件进行了研究。其工艺流程是将粉碎后的菱锌矿进行循环酸浸，净化后再直接和碳化母液反应，经沉降后再煅烧分解为轻质氧化锌，产品质量符合国家标准，视比容大，活性强，成本低，经济效益显著。     

黄河龙青段主要环境工程地质问题分析思路

介绍了黄河上游龙青段主要环境工程地质问题的分析思路，以达到抛砖引玉，交流和提高电工程地质勘测水平的目的。     

吴岭水库土坝渗流及坝坡稳定性分析

本文对湖北省京山县吴岭水库土坝进行了有限元渗流计算和坝坡稳定性计算,在分析大坝基础部位的残坡积土、强风化砂岩的强透水性和下游排水体对于大坝渗流场的影响的基础上,得出渗流是引起下游坝坡不稳定的主要因素,为大坝的加固处理提供了理论依据,也可供同类土坝设计时参考。     

特大型桥梁工程地质勘察区域地壳稳定性研究

重大工程区域地壳稳定性研究，是工程前期工程地质勘察的重要内容之一，并越来越多地为工程建设所重视。大桥工程地质勘察以往对此涉及较少，也无明确的统一规定，以长江上所建特大桥为例，对此项工程作了些探索性的研究，重点研究的问题是：区域构造环境及构造变形，地壳结构和深部构造，新构造活动，断裂活动，地震活动等，为大桥建设宏观决策和抗震设计提供依据。     

The Loss of Hydrophobic Polypeptides during Fermentation and Conditioning of High Gravity and Low Gravity Brewed Beer

The object of this study was to investigate the loss of hydrophobic polypeptides, which are important for foam quality and stability in finished beer. Loss of hydrophobic polypeptide due to fermenter foaming occurs during transfer of fermented wort since a gradient of hydrophobic polypeptides towards the surface is created during fermentation. Due to higher polyphenol levels in high gravity (20°Plato) wort, more hydrophobic polypeptides are lost due to cold break (cold trub) precipitation compared to low gravity (12°Plato) wort. Another important factor affecting the loss of hydrophobic polypeptides could be proteinase A activity during fermentation, especially in high gravity fermentation where the yeast is exposed the higher stress. During high gravity fermentation, where osmotic pressures are higher, ethanol levels become greater, and nitrogen‐carbohydrate ratios are lower, more proteinase A is released by the yeast. This release of proteinase A into fermenting wort could have implications for the foam stability of the finished product.