Imaging the domain pattern of the canted magnetization state in Co/Pt multilayer films

The exact magnetization pattern of magnetic films close to a spin-reorientation transition is difficult to analyze due to the intrinsically three-dimensional (3d) variation of the orientation of the local magnetization. We present a technique how this can be performed, based on the analysis of high quality 2d polarization maps from a single scanning electron microscope with polarization analysis (SEMPA) measurement with tilted sample. The key tool is the statistical distribution of all occurring polarization doublets, visualized in a 2d histogram plot. From the shape of the distribution the type of transition—canted-phase, or coexisting phases—can be inferred. For the canted-phase state, the canting angle can be accurately determined from geometrical considerations. With help of the histogram the image data can be analyzed and the three components of the magnetization can be calculated for most points of the image. For a Co/Pt multilayer film we found a cone state. The magnetization forms a complex pattern consisting of out-of-plane domains while the in-plane magnetization shows a maze pattern.     

压力计探测液面法探讨

针对油田地质特征复杂，易结蜡，测试中易出现假液面等情况，为准确快速测得液面资料，提出压力计测试液面法。该方法可作为回声仪测液面方法的有效补充。     

液晶电控效应的实验研究

详细阐述了液晶的电光效应,介绍了利用分光光度计测量液晶透射比的方法。通过改变加在液晶盒上的电压大小及其频率高低,详细测量了液晶的透射比。通过做图分析了液晶的电控双折射效应,得出液晶的透射比随所加电压的大小和频率的高低而变化,以及液晶的阈值电压随频率的增高而减小的规律,这对液晶器件的设计与研究均具有一定的参考价值。     

A Finite Element Computational Method for Gas Hydrate. Part I: Theory

A finite element scheme is presented to model the dissociation of gas hydrates in porous media by hot water injection. We show a complete derivation of the finite element formulation, including the associated mass and energy conservation equations capable of performing transient analysis of both conductive and convective heat transfer for gas and liquid flow in porous media. The scheme also includes the latent heat effect to accommodate the change of phase due to melting of hydrate. In the companion paper, Part II, this method is successfully applied to hydrate reservoirs.     

Changes in polymer foils used in food packaging tested by using differential scanning calorimetry

This work is an experimental study of the differential scanning calorimetry characterisation of polymer materials used in food packaging materials, such as polypropylene (0.03 mm), polyethylene (0.1 and 0.03 mm), poly(D-(-)-Β-hydroxybutyrate) (powder), two-layered polypropylene (0.064 mm), and two-layered polypropylene with poly-vinylidene-chloride (0.012/0.021). The polymer stability was checked by simulation of conditions during food preparation in microwave ovens, sterilisation or rapid freezing. The materials were tested in the temperature range from 40 to 200‡C at different scan rates from 2 to 30°C min⁻¹ during heating or cooling. The enthalpies show a high correlation coefficient (0.964) with scan rate. All samples undergo phase change in the temperature range from 107 to 173°C during heating and enthalpies are in the range from 31.8 to 71.1Jg⁻¹. Upon subsequent cooling from 200°C, the temperature range of phase changes is shifted to lower temperatures from 86 to 102°C with enthalpies ranging from 30.4 to 57.8 J g⁻¹. Experiments with exposure of polymers to microwave radiation and freezing prove that the phase change considering the temperature range is very similar in all experiments.     

掺杂铁电纳米粉的液晶的电光特性

铁电纳米粒子悬浮在向列相液晶母体中，增强介电各向异性，而且对施加的电场信号敏感。本文也展示了纳米粒子对所述复合材料可实现的总的相变的作用。这种方法也许可应用于设计新型显示材料。     

An investigation of the unstable region for dense phase conveying in sliding bed flow

For fine powdered materials, capable of being conveyed in dense phase, a conveying region exists in which instability in flow and pipeline blockage can occur if the pressure gradient available is insufficient to maintain a minimum value of solids loading ratio. A reduction in material flow rate can also lead to pipeline blockage in this region. Conveying trials under-taken with cement are used to illustrate the nature of the problem.     

电控平行排列液晶光栅的光衍射特性研究

对电控平行液晶光栅的理论进行了分析,并配以结构原理图。通过对平行排列及90°扭曲排列液晶指向矢的计算,得出液晶盒中相应的折射率、相位差与电压之间的关系图,两者经比较证明平行排列更具适用性,并在实验中观测到了平行排列液晶光栅衍射特性与电压的关系。     

棒状液晶分子相变问题的机械旋转模型研究

综述一种关于棒状液晶材料的分子结构与液晶相的相关关系的研究成果。介绍了有关液晶分子的机械旋转模型。该模型将液晶分子视作一种高速旋转的转子,通过分子参数计算,对液晶材料的相变温度和分子结构之间的关系给出了一种全新的解释。最新研究表明,含氟三苯液晶材料的分子结构中存在slim和fat现象,能够对液晶材料的相变进行合理解释。该模型能够通过简单的模型方法对新型液晶材料的分子设计与合成提供有用的信息。     

尺度目标识别中的若干技术问题

从工程应用的角度阐述了现代鱼雷常用的尺度目标识别原理，讨论了影响识别距离的若干因素和措施，提出了小尺度模拟靶通过亮点延时算法以弥补尺度不足及其试验技术，试验结果表明，该方法可以获得良好效果。