用有限元确定起重机裂纹补强板的参数

采用ANSYS有限元分析软件，对因出现裂纹的起重机主梁而添加的补强板进行系列计算，得出修补后主梁裂纹的应力及应力强度因子的变化规律。结果表明，采用参数适当的补强板，可降低起重机主梁裂纹尖端的应力，从而保证起重机的安全。     

海洋软管增强层的选择及结合方式

当前输油管道软管的应用越来越广，尤其是陆上石油开采日趋贫乏，海庆石油开采比重将越来越大，势必将对海洋用软管的需求不断加大。而对海洋软管技术要求也不断提高，其中大多是针对软管内的增强层所提出的。论述了海洋软管增强层的结构形式、技术要求、材质选择等几方面内容，考察了不同增强层对海洋软管耐压性、耐蚀性、屈挠性、粘合性等指标的影响。     

Procedure for the evaluation of the accumulation of defects in metallic structural materials under complex elastoplastic loading

Within framework of the continual fracture mechanics, we describe the engineering approach to the assessment of scattered microdamage accumulation kinetics in metallic materials under elastoplastic loading conditions in case of plane stressed state. Automatized experimental stand and the respective investigation technique are discussed. The stand has been developed based on modification of the UMé-10T electromechanic test machine. State-of-the-art computer technologies and microprocessing hardware are incorporated in the stand automation. We present the technique of experimental assessment of damage accumulation kinetics in metallic structural materials under complex elastoplastic loading conditions with account of two different fracture (cleavage and shear) processes, which technique is based on measuring the specific electric resistance of the specimen. __________ Translated from Problemy Prochnosti, No. 1, pp. 128–137, January–February, 2006.     

Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.     

Thermodynamic state of reinforced interpenetrating polymer networks

The free energies of mixing of two networks in the interpenetrating polymer network based on crosslinked polyurethane and poly(ester acrylate) have been determined by the vapour sorption method. It was established that the constituent networks in the IPN are not miscible. The introduction of fillers of different chemical nature increases the compatibility. The thermodynamic affinity of the fillers to the individual networks and IPN was estimated. It was established that when the free energy of interaction of one or both components of the IPN with the filler is negative, reinforcement leads to the formation of a compatible and equilibrium system. For fillers having no affinity to the polymers, compatibilization is observed, which is connected with slowing down of phase separation in the system in the presence of filler.     

短纤维增强透气性莫来石/铁(A3S2/Fe)复合材料烧结特性的研究

本文研究了A₃S₂/Fe复合材料的烧结特性、透气性和纤维增强效果,分析了烧结过程中材料宏观结构和微观组织的形成机理.实验结果表明:纤维增强A₃S₂/Fe复合材料在900～1000℃具有良好的烧结性能,烧成后表层存在一定厚度的硬化层;纤维增强效果显着.材料抗压强度达17～23MPa,相对透气系数为4.30～9.69cm3/(cm2·s·atm).已能满足实际应用的需要.     

Flow stress of high density polyethylene and nylon 66 at high rates of strain

Measurement of the flow stress of high density polyethylene (HDPE) and nylon 66 at strain rates of 10³ s^?1 using a split Hopkinson pressure bar technique is discussed. The flow stress at a strain of 10% has been determined for both polymers at 20°C. The intrinsic errors involved in this technique are briefly reviewed. The results indicate that the flow stress of HDPE and nylon 66 were 50MPa and 150MPa, respectively, at strain rates of about 10³s^?1.     

Simulation of runoff and phosphorus transport in a Carpathian catchment,Slovakia

A comprehensive, GIS‐based modelling approach is developed to estimate runoff and phosphorus transport within a watershed at a daily time step. The approach relies on the use of GIS data for deriving major critical model parameters that exhibit distinct spatial variability over the catchment. Surface runoff is calculated by a modified rational method, which depends upon rainfall intensity, soil moisture status, slope, land‐use and soil characteristics. Phosphorus loading is estimated as a function of the runoff volume and the event mean concentration for different land use categories. A diffusive approximation method is used to trace runoff and phosphorus transport to the basin outlet. The modelling approach is tested in the Margecany catchment, Hornad River basin, Slovakia, to simulate runoff, phosphorus loading, and its transport on a daily time scale using data observed between 1995 and 2000. Satisfactory results of the hydrographs and phosphorus concentration at the basin outlet are obtained, though more efforts regarding the phosphorus cycling and its biochemical reactions need to be clarified by further research. Copyright © 2006 John Wiley & Sons, Ltd.     

Motivated attention and prepulse inhibition of startle in rats: Using conditioned reinforcers as prepulses.

In humans, prepulse inhibition (PPI) of startle is greater during attended prestimuli than it is during ignored prestimuli, whereas in rats, most work has focused on passive PPI, which does not require attention. In the work described in this article, researchers developed a paradigm to assess attentional modification of PPI in rats using motivationally salient prepulses. Water-deprived rats were either conditioned to attend to a conditioned stimulus (CS; 1-s, 7-dB increase in white noise) paired with water (CS+ group), or they received uncorrelated presentations of white noise and water (CSo group). After 10 conditioning sessions, startle probes (50 ms, 115 dB) were introduced, with the CS serving as a continuous prepulse. Three experiments examined PPI across a range of prepulse intensities (4-10 dB) and stimulus onset asynchronies (SOAs; 30-960 ms). PPI was consistently reduced in the CS+ group, particularly with a 10-dB prepulse and a 60-ms SOA. Thus, PPI in rats differed between attended and ignored prestimuli, but the effect was reversed in the results of research with humans. A fourth study eliminated the group difference by reversing the CS-water contingency. Methodological and motivational hypotheses regarding the current findings are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of pencil lead hardness on voltammetric response of graphite reinforcement carbon electrodes

This work studied the voltammetric response of graphite reinforcement electrodes made of different pencil lead hardness. The studies showed that harder graphite leads, regardless of their manufacturer, are more appropriate as electrode material for voltammetric purposes due to their higher peak currents, increasing sensitivity and reproducibility, with ΔEp closer to the theoretical value for a reversible system.