用弯曲模型推导二组元复合材料杨氏模量新公式

用弯曲模型推导了适用于悬丝耦合弯曲共振法检测金属第二组元的杨氏模量的理论公式。通过实验数据计算。结果表明在两组元h2/h1≈1时与文献[2]的计算结果几乎接近，为用悬丝耦合弯曲共振法检测各种减振材料，陶瓷材料杨氏模量提供了理论公式；同时用改进后的弯曲模型推导出了适用于纤维复合材料横向杨氏模量的预测公式。     

Development of new device for measuring thermal stresses

In recent years, numerous analytical and experimental researches have been performed on the prediction of thermal stresses in mass concrete structures. However, due to the difficulty of the problem, limitations still exist for both analytical and experimental methods of measuring thermal stresses in mass concrete. In this research, a new experimental device measuring thermal stresses directly in a laboratory setting is developed. The equipment is located in a temperature chamber that follows the temperature history, which has been previously obtained from temperature distribution analyses. Thermal forces are measured continuously by two load cells in the device. The results show that the thermal stresses estimated by the newly developed device agree well with general stress variations in actual structures.     

Adhesion and Hydrolytic Stability of the Interface Between High-Modulus Polyethylene Fibers and Acrylic Resins

The effects of oxyen plasma treatment on the surface chemistry of Spectra 1000® high modulus polyethylene fibers and on the mechanical properties of fiber-reinforced composites of the fibers in a Bis-GMA based acrylic resin have been studied. X-ray photoelectron spectroscopy and diffuse reflectance FTIR spectroscopy have been used to show that the majority of oxygen on the fiber surface exists mostly in the form of ether and/or epoxy linkages, with carbonyl-, carboxylic- and ester-containing compounds accounting for less than 10 percent of the total. While the untreated and plasma-treated fibers have similar chemical compositions, the surfaces of the plasma-treated fibers are more polar and the oxygen is chemically bonded instead of being merely physisorbed. The interfacial shear strength between the fibers and the acrylic resin is increased by a factor of 2.3 by the plasma treatment indicating the presence of a weak boundary layer on the surface of the untreated fibers. The hydrolytic stability of the composite interfaces was investigated for fibers sized with several Bis-GMA-based adhesives. Maximum stability was attained by sizing with Bis-GMA containing a peroxide catalyst or an amine accelerator. The flexural properties of composites utilizing plasma-treated and untreated fibers were compared in three-point bending. The ultimate bending loads for composites using treated fibers were much higher than those for composites with untreated fibers, but only a fraction of that for glass or Kevlar®-reinforced materials.     

Improvement of polymer blend properties by changing sequence of mixing

The basic objective of this article is to improve the polymer blend properties by changing mixing sequence. Blending of two elastomers does not lead to a molecularly homogeneous blend (true solution), but to a heterogeneous system in which both polymer phases are present. In this article, the detailed study of heterogeneous distribution of carbon black as well as blend inhomogenity and the physicomechanical including dynamic mechanical properties of the blend has been carried out. The choice of the blend was natural rubber/polybutadiene rubber as 85:15. Heterogeneous carbon black distribution study was also performed in differential scanning calorimeter. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2735–2742, 2007     

考虑纤维波动[＋φ／-φ]缠绕角管件的轴向弹性模量计算方法

本文在计算[ φ/-φ]缠绕角管件的轴向弹性模量时,通过引入纤维波动程度参数来计入纤维波动的影响,理论计算结果与层板理论计算结果相比更接近实验结果,说明本文提出的算法,可在一定程度上计入纤维波动的影响。     

Cloud based intelligent system for delivering health care as a service

The promising potential of cloud computing and its convergence with technologies such as mobile computing, wireless networks, sensor technologies allows for creation and delivery of newer type of cloud services. In this paper, we advocate the use of cloud computing for the creation and management of cloud based health care services. As a representative case study, we design a Cloud Based Intelligent Health Care Service (CBIHCS) that performs real time monitoring of user health data for diagnosis of chronic illness such as diabetes. Advance body sensor components are utilized to gather user specific health data and store in cloud based storage repositories for subsequent analysis and classification. In addition, infrastructure level mechanisms are proposed to provide dynamic resource elasticity for CBIHCS. Experimental results demonstrate that classification accuracy of 92.59% is achieved with our prototype system and the predicted patterns of CPU usage offer better opportunities for adaptive resource elasticity.     

Viscoelastic Effects in a Phosphate Glass-Metal Seal

A family of phosphate glasses has been developed with thermal expansion behavior in the elastic range that nearly matches the response of 304 stainless steel. Attempts to make concentric pin-shell seals consistently have yielded fractures between 400° and 300°C during cooling. Elastic stress analyses which neglect glass transitional behavior and utilize constant glassy ("elastic") thermal expansion coefficients predict a residual stress state that is compressive. However, viscoelastic computations which include the effects of structural relaxation during glass transtion show that tensile stresses sufficient to cause failure arise during cooldown of the seal.     

PVC-U型材弹性模量测试偏差分析

在对PVC-U型材弹性模量试验中发现，同一样品的规则样条与不规则样条的弯曲弹性模量相差较大。不规则样条的负荷-挠度曲线上会出现拐点，如果不对曲线进行处理直接计算得到的弯曲弹性模量偏小。在不规则样条的负荷-挠度取拐点后直线段切线与横坐标的交点作零点修正后所测得的弯曲弹性模量比较接近真实值。通过实验可以验证处理后的方法测得的弹性模量与均匀规则样条的弯曲弹性模量相近。     

Mechanical Properties of Porous Materials

Porous materials are commonly found in nature and as industrial materials such as wood, carbon, foams, ceramics and bricks. In order to use them effectively, their mechanical properties must be understood in relation to their micro-structures. This paper studies the mechanical properties of a few common porous materials: carbon rods, ceramics, polymeric foams and bricks. The characterisation of pore structures was performed using a Mercury Porosimeter. Detailed information was obtained on the density, porosity, surface area and pore size distribution. A large number of experiments on either bending or compression were conducted in order to obtain their macro-mechanical properties such as Young's modulus, hardness and strength. Based on the experimental observations, theoretical models were employed to predict the macro-properties from the micromechanics viewpoint. By studying the deformation of pores the global behaviour was calculated. Two simple formulae for the elastic modulus, E, were proposed: for low values of porosity, , E = E⁰(1 – 2) (1 + 4²) where E⁰ is the elastic modulus when the porosity is zero; for high value of porosity such as for foams E = E⁰ (1 – )². The theoretical results agreed well with the experimental ones. The study has provided insights into the mechanical properties of porous materials over a wide range of porosity values.     

基于粗糙集的焦炉加热工序控制规则提取

应用粗糙集(RS)理论对焦炉直行温度的控制规则进行了提取。首先收集人工成功控制直行温度的原始样本,添加可控与不可控参数,得到初始决策表;指出模糊控制方法因输入参数过少,从而会导致不确定性决策;然后利用RS理论对初始决策表进行约简,发现了关键影响因素及潜在规律,最终得到两组仅含有三个参数,简洁、一致、完备的控制规则,并经实际运行检验了规则的适用性。