石油天然气长输管线用钢新进展

本文介绍了１９９０年以来国外在石油天然气长输管线用钢方面的最新成果，以获得较低的强度和韧性匹配为目的经轧后加速冷却工艺后的钢的强度的预测和控制；具有优良抗氢致裂纹的含硼、微碳、低硫、Ｎｂ－Ｔｉ微合金化、Ｘ６５－Ｘ８０级管线钢的开发，满足于特殊性能要求的ＴｉＯ处理技术及Ｘ８０级ＴｉＯ细化晶粒钢、低硬度和低屈强比钢，以及复合板加工耐腐蚀钢管的生产。     

SiGe: An attractive material for post-CMOS processing of MEMS

This work gives an overview of the different developments for silicon germanium (Si_1−xGe_x) from a MEMS post-processing perspective. First, the maximum processing temperature that does not introduce any damage or degradation into the standard characteristics of the CMOS driving electronics is specified. Then, the optimal type of silicon and germanium gas sources and deposition technique that results in an economical process are identified. Next, the selection criteria for a low thermal budget doping method and doping species are discussed. Finally, the advantage and disadvantage for the different approaches implemented for enhancing the physical properties of poly Si_1−xGe_x at a CMOS backend compatible temperature are highlighted. It is shown that the optimal method depends on the application requirements and the CMOS technology used for realizing the driving electronics.     

型钢厂试轧美标H型钢性能分析研究

分析了型钢厂试制热轧美标H型钢低温冲击韧性偏低的原因，并在此基础上提出了对生产工艺的优化与改进。     

强激光热斑形成及其稳定性研究

在论述热点跟踪及其传热机理时将靶材的比热溶、热传导系、在激光的热藕合系数均考虑成温度和时间的函数，又考虑靶材在运动时将激光辐照物体时热点的建立及其稳定情况作一动态数值模拟，为热点跟踪作准备。     

Surface treatment for adhesive-bonded joints by excimer laser

In this work a treatment for surface preparation to improve mechanical resistance in adhesive bonding of plastic composites reinforced with fibres and metallic material, has been performed using an excimer laser. The following couplings have been selected to reproduce joints commonly used in the aerospace and automotive industry: CFC (carbon fibre composite) with CFC, CFC with Al 2024T3, Al 99% with Al 99%, GFC (glass fibre composite) with zinc-coated sheet in low carbon steel FeP01. The surfaces have been prepared using an excimer laser, adopting several values of laser parameters. The obtained surfaces have been examined by optical and scanning electron microscope: comparative measures of wetting and roughness have been performed to obtain an accurate characterisation and to select the proper finishes suitable to improve the mechanical resistance of the joints. The results obtained show that laser treatment always improves the final resistance of the joint; notable increases, and no significant surface damages have been highlighted. Better results have been obtained with the Al 99% with Al 99% joints which, with a low number of pulses treatment, have shown an increase of mechanical resistance up to the 70%.     

Research progress in terahertz quantum cascade lasers

The terahertz(THz)quantum cascade laser(QCL)is a coherent THz source based on intersubband transitions of unipolar carriers.As semiconductor lasers,THz QCLs are solid-state,electrically pumped,tunable,and can be easily integrated.This paper reviews the state of the art for the design,operation temperature,and output power of THz QCLs.Their applications in THz communication and imaging are also discussed.     

发电机组低励限制的功能特点及试验

分析低励限制的应用目标和功能特点,在此基础上,提出低励试验目的和内容,为正确发挥低励限制功能及并网预防事故发生提供参考。     

在线气体分析系统在炼钢厂的应用

介绍宣钢炼钢厂转炉煤气回收过程的在线气体分析,比较激光分析仪和抽气式气体分析仪的工作原理及特点。     

关于新建炉EDTA低浓度清洗的探讨

阐述了EDTA清洗锅炉的基本原理,低浓度清洗新建炉的工艺、方法及控制要点,EDTA低浓度清洗与协调EDTA清洗的经济性比较,为新建炉EDTA低浓度清洗探索了方向。     

锡膏激光扫描三维测量系统光强自适应调节技术

根据锡膏激光扫描三维测量系统在测量PCB电路板时底板和锡膏对激光光强的散射效果不同,设计并研制了一套光强自适应调节光源。该光源以程控电源为基础,分析光条中心提取效果与激光光强的关系,应用小波分解与频带能量比相结合的光强自适应调节算法实现测量系统光强自适应调节功能。进行了相关实验,实验结果表明该光源能够很好地实现锡膏激光扫描三维测量系统的激光光强自适应调节,并能选出最适合测量的激光光强,具有很好的适用性。