玉米黄粉酶解液在黄原胶发酵生产应用的研究

以玉米黄粉酶解液为氮源应用于黄原胶发酵培养基，探讨了蛋白酶种类、玉米黄粉酶解液添加量和酶添加量等因素对其发酵黄原胶粘度和产胶率的影响，并优化了复配氮源的种类及其复配比例。结果表明，碱性蛋白酶水解液作为氮源发酵黄原胶的粘度和产胶率优于其它蛋白酶解液；当酶解液添加量为6%、碱性蛋白酶添加量为8kU时，发酵黄原胶的粘度和产胶率可以达到4235cp和24.4g/L。大豆蛋白与玉米黄粉酶解液复配效果优于与棉籽粉、豆粕粉、花生粉的复配；玉米黄粉酶解液与大豆蛋白复配比为3:7时，发酵黄原胶的粘度和产胶率可以达到5833cp和32.4g/L，与单独以大豆蛋白为氮源无明显差异。本研究为提高玉米黄粉资源利用率、降低黄原胶的发酵生产成本提供了新思路。     

提高PVC糊树脂质量小结

叙述了降低PVC糊树脂产品中氯乙烯残留量、稳定糊黏度的措施。通过改进，提高了产品质量。     

Preparation of glycol derivatives of partially hydrogenated soybean oil fatty acids and their potential as lubricants

Glycol diesters and mixtures of mono- and diesters have been prepared from methyl esters of partially hydrogenated soybean oil fatty acids and diethylene, dipropylene, neopentyl and triethylene glycols. The catalyst used in these reactions was a mixture of calcium acetate/barium acetate (3∶1, w/w). The reactions were carried out under nitrogen with 0.5% catalyst at temperatures in the range of 190–275°C. Borated esters of mixed mono- and diesters were prepared with 0.33 equivalent of boric acid per 1.0 equivalent hydroxyl group on the ester. Refractive indices, viscosities, and flash and fire points were determined for diesters, mixed mono- and diesters, and mixed diesters and borated esters. The viscosities, flash points and fire points indicate that these esters can be used as a component of lubricating oils. Wear-prevention characteristics of mixed diesters and borated esters indicated that they can be used as antifriction additives in lubricating oils. Lecture presented at the joint meeting of the International Society for Fat Research and the American Oil Chemists' Society in Toronto, May 10, 1992.     

Viscoelastic Effects in a Phosphate Glass-Metal Seal

A family of phosphate glasses has been developed with thermal expansion behavior in the elastic range that nearly matches the response of 304 stainless steel. Attempts to make concentric pin-shell seals consistently have yielded fractures between 400° and 300°C during cooling. Elastic stress analyses which neglect glass transitional behavior and utilize constant glassy ("elastic") thermal expansion coefficients predict a residual stress state that is compressive. However, viscoelastic computations which include the effects of structural relaxation during glass transtion show that tensile stresses sufficient to cause failure arise during cooldown of the seal.     

数码辅助方法在毛细管流变仪测量粘度的应用

讨论了传统流变仪测量粘度上存在的问题，提出了改进的方案测量粘度，以减少误差。试验方案主要体现在用数码方法采集数据。     

压力流化床燃烧煤水混合燃料泵送给料技术在国外的研究进展

压力流化床燃烧技术近二十年来在世界上得到很大发展。煤的湿法给料系统具有比干法输送系统更简单，运行调节更可靠等优点。煤水混合物可泵送的水分在２５％左右，煤的粒度一般为０～６ｍｍ，表现为非牛顿的假塑性流体特性，通过级配来达到一定的稳定性和良好输送性能，且流动阻力低，不用添加剂即可实现泵送，它的应用使压力流化床的燃烧制备和输送系统成本大大降低。     

振动剪切作用下聚合物熔体的非仿射网络结构模型——振动参数对聚合物熔体黏性的影响

利用非仿射网络结构本构模型分析了正弦脉动流场中振动参数对聚合物熔体黏性的影响作用，并从缠结密度的概念上来解释其影响规律。     

Low-temperature properties of triglyceride-based diesel fuels: Transesterified methyl esters and petroleum middle distillate/ester blends

This work examines low-temperature properties of triglyceride-based alternate fuels for direct-injection compression-ignition engines. Methyl esters from transesterified soybean oil were studied as neat fuels and in blends with petroleum middle distillates (No. 1 or No. 2 diesel fuel). Admixed methyl esters composed of 5–30 vol% tallowate methyl esters in soyate methyl esters were also examined. Pour points, cloud points, and kinematic viscosities were measured; viscosities at cooler temperatures were studied to evaluate effects of sustained exposure. Low-temperature filterability studies were conducted in accordance with two standard methodologies. The North American standard was the low-temperature flow test (LTFT), and its European equivalent was the cold-filter plugging point (CFPP). With respect to cold-flow properties, blending methyl esters with middle distillates is limited to relatively low ester contents before the properties become preclusive. Under most conditions, cold-flow properties were not greatly affected by admixing the methyl esters with up to 30 vol% tallowate (before blending). Least squares analysis showed that both LTFT and CFPP of formulations containing at least 10 vol% methyl esters are linear functions of cloud point. In addition, statistical analysis of the LTFT data showed a strong 1:1 correlation between LTFT and CP. This result may prove crucial in efforts to improve low-temperature flow properties of alternate diesel fuels that contain methyl esters derived from triglycerides.     

Effect of molecular weight on two smectic polyesters

The liquid crystalline transitions of two kinds of smectic polyesters with different molecular weights were investigated by DSC, polarized microscopy and X-ray diffraction. The molecular weight affects the transitions significantly for these two kinds of polyesters. With a high enough molecular weight, both poly (pentamethylenep,p-bibenzoate) and poly(hexamethylenep,p-bibenzoate) exhibit an enantiotropic smectic phase, but the two endothermic transition peaks of the DSC heating curve seem to overlap. The polyesters tend to exhibit a monotropic smectic phase as the molecular weight decreases. From the DSC cooling curve, the isotropic-smectic transition can be seen more clearly. As the molecular weight decreases, the smectic order decrease significantly. The molecular weight affects the transitions in a different way for these two different kinds of polyesters.     

In situ visualization of drop deformation,erosion, and breakup in high viscosity ratio polymeric systems under high shearing stress conditions

In this paper, deformation and breakup under simple shear of single molten polymer drops in a polymer matrix were investigated. Flow visualization was carried out in a Couette‐Flow apparatus under relatively high shear rates and temperatures up to 230°C. Drop/Matrix combinations were composed of polystyrene drops of 0.5–0.6 mm in diameter in polyethylene matrix, and ethylene–propylene copolymer drops of approximately the same size in polypropylene matrix. The deformation and breakup processes were studied under steady state and time‐dependent shearing conditions. Either for steady state or time‐dependant shearing conditions, drop elasticity generated at relatively high shear rates helped the drops to align perpendicular to the flow direction, i.e., parallel to vorticity axis. Also, the most striking non‐Newtonian effects for the high viscosity ratio systems were the surface erosion and the drop splitting mechanisms. The particles eroded off the main droplet surface were very fine, in the range of 10–50 μm, and led to a significant reduction in main drop size before its final breakup. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2582–2591, 2006