PFC控制技术的一种改进方案

文章首先指出了目前ＰＦＣ所用控制技术的缺陷，然后提出了一各改进方案，并从理论分析和仿真验证的角度证明了改进方案的可行性和先进性。     

复合功能陶瓷中的晶界渗流模型

在复合陶瓷材料中提出了晶界控制的渗液模，考虑晶界效应对渗流阀值的影响，采用ＭｏｎｔｅＣａｒｌｏ模拟，计算得到三维ＦＣＣ晶格点阵的渗流阀值约为４．５％。该结果与实验数据符合得很好。     

Optimal operation of a multibasin reservoir system

A simulation-optimization procedure is presented for evaluating the extent of interbasin transfer of water in the Peninsular Indian river system consisting of 15 reservoirs on four river basins. A system-dependent simulation model is developed incorporating the concept of reservoir zoning to facilitate releases and transfers. The simulation model generates a larger number of solutions which are then screened by the optimization model. The Box complex nonlinear programming algorithm is used for the optimization. The performance of the system is evaluated through simulation with the optimal reservoir zones with respect to four indices, reliability, resiliency, vulnerability and deficit ratio. The results indicate that by operating the system of 15 reservoirs as a single unit the existing utilization of water may be increased significantly.     

DNS／GPS组合导航系统研究

本文阐述ＤＮＳ与ＧＰＳ组合导航的必要性、可行性及组合方法，给出了误差模型和卡尔曼滤波模型。选取观测量不同可有三种组合方式，通过模拟计算给出了相应曲线。当采用伪距及其变化率作为观测量时，其组合方式最佳，定位精度可达米级，航向精度可提高到０．２°。     

高Q Ba(Zn_(1/3)Ta_(2/3))O_3介质谐振器材料及其在毫米波系统中的应用

叙述了Ｂａ（Ｚｎ１／３Ｔａ２／３）Ｏ３介质谐振器材料的制备、结构、微波性能及典型应用。Ｂａ（Ｚｎ１／３Ｔａ２／３）Ｏ３介质材料介电常数εｒ为２９．５，频率温度系数τ≈０（－５５～＋８５℃），１０ＧＨｚ下最大无载Ｑ值１４７００，在２８ＧＨｚ测得Ｑ值约为４８００。这种材料具有高Ｑ值，特别适用于Ｘ以上波段作为振荡器电路中频率稳定元件。用这种介质谐振器已研制出８ｍｍ介质稳频微带耿氏振荡器，频率稳定度小于１０×１０－６／℃，最大输出功率达１８０ｍＷ。     

Delivering Improvement from Truth — the Fragile Link Between Analysis and Effective Change

In the history of operations research in industry there has been an abundance of analyses and recommendations produced in millions of man hours by dedicated OR specialists. And yet the net improvement is significantly lower than expected. There are numerous reasons for this shortfall: incomplete analysis, too much theory, incomplete implementation, unreliable recommendations, or a combination of some of these reasons.
By describing several examples, the major reasons for the fragility of the link between recommendation and implementation will be reviewed. What has to be done today to increase the likelihood of implementing an OR recommendation and thus improve the performance of an industrial entity by using the power of OR tools will then be described.     

载体及反应条件对Pt/BaKL沸石催化剂芳构化性能的影响

研究了γ-Al_2O_3或SiO_2载体,以及反应条件对Pt/BaKL沸石催化剂芳构化性能的影响。发现经过碱化或负载Sn的γ-Al_2O_3作为载体,能够较好地保持该催化剂在正己烷芳构化反应中的高活性和高选择性,并有益于改善Pt/BaKL沸石催化剂的抗硫性能。     

基体改性对C/C复合材料性能影响的研究(一)

本文从C/C复合材料的基体入手,研究了基体沥青、焦炭中添加氧化物的工艺条件及其在复合材料中的作用.结果表明,添加氧化物对基体改性,不仅能提高C/C复合材料的高温抗氧化性,也能对其它性能带来很大影响.只要控制适当的工艺条件,就可以得到高性能的C/C复合材料.     

Effet de la pression sur la transition ruisselant-pulsé dans les réacteurs catalytiques à lit fixe arrosé

The effect of pressure on transition displacement between trickle and pulsed regimes (TPR: trickle-pulsed transition) in catalytic trickle bed reactors (CTBR) is not properly predicted by existing theoretical models and empirical correlations. Based on high pressure TPR data available to date, a modified Charpentier diagram is proposed to quantify directly the effect of pressure in non-foaming systems.     

AlGaAs／GaAs HBT表面效应的二维数值分析

采用表面效应集总模型综合考虑表面费米能级钉扎和表面复合效应，对ＡｌＧａＡｓ／ＧａＡｓＨＢＴ表面效应的影响进行了二维数值模拟。结果表明，表面态的存在对集电极电流几乎不产生影响，但显著增加基极电流，使得电流增益明显下降。同时还发现在台面结构ＡＩＧａＡｓ／ＧａＡｓＨＢＴ中外基区表面复合的集边效应，即外基区表面复合主要发生在发射极台面与外基区的交界处附近，与外基区长度基本无关。模拟还表明基区缓变结构可以减少表面复合，提高电流增益。