一种快速自适应谱估计算法

通过对梯度格型快速自适应算法的研究,结合最大熵谱外推目前存在的缺点,将梯度格型算法应用于最大熵谱外推中,并将其与伯格算法进行了比较。     

从测角后交最佳点位规律看规范规定之不足

本文分析了文献[1]所总结的测角后交两类公式在取得最佳点位时的规律,指出当前规范对此问题规定之不足.     

齐次等式约束线性回归模型条件根方估计的效率

对齐次等式约束线性回归模型回归系数的约束最小二乘估计提出改进,引入一种估计的相对效率,证明在一定条件下,狭义条件根方估计、广义条件根方估计的效率均高于约束最小二乘估计的效率．     

Stochastic approximation learning for mixtures of multivariate elliptical distributions

Most of the current approaches to mixture modeling consider mixture components from a few families of probability distributions, in particular from the Gaussian family. The reasons of these preferences can be traced to their training algorithms, typically versions of the Expectation-Maximization (EM) method. The re-estimation equations needed by this method become very complex as the mixture components depart from the simplest cases. Here we propose to use a stochastic approximation method for probabilistic mixture learning. Under this method it is straightforward to train mixtures composed by a wide range of mixture components from different families. Hence, it is a flexible alternative for mixture learning. Experimental results are presented to show the probability density and missing value estimation capabilities of our proposal.     

基于网络状态参数估计的主动队列管理PI改进算法

作为一种重要的主动队列管理手段,PI控制器算法通过积分嚣的引入有效地消除了队列长度控制的稳态误差,在提高网络吞吐的同时缩短了排队时延.但是PI控制器不能根据网络状态变化而自动调整控制参数,故当网络流量变化时PI控制器的收敛速度很慢.基于TCP-AQM系统模型,对经过中间节点的活动连接数、平均往返时间和前向链路容量等3个参数进行估计.通过计算击中概率的倒数,估计出活动流数;通过计算单位时间的数据包数,估计出网络容量;通过往返时延、活动流数、网络容量以及丢包概率在稳态时的关系式,估算出平均往返时延.在此基础上,提出了对网络状态变化自适应调整控制参数改进的快速收敛PI算法——FCPI算法.仿真结果表明,该算法有效提高了算法的收敛速度,并且鲁棒性好,易于实现,适用于未来高速网络的路由器.     

基于运动方向预测的快速运动估计算法

利用序列图像的相邻块运动矢量的高度相关性和运动矢量的中心偏移特性,提出一种基于运动方向预测的快速运动估计算法。设计4种方向性模板,根据参考运动矢量预测出图像块的运动情况,根据不同的运动方向选择对应的方向性模板进行搜索。实验结果表明,该算法在速度和准确性方面都优于传统的快速运动估计算法。     

基于视频对象的区域分割及其应用

为适应MPEG-4基于对象的应用,提出一种基于视频对象的区域分割算法。在视频对象的指导下,利用均值漂移进行分割,性能比传统均值漂移算法在计算时间、占用内存等方面均有提高,适用于运算速度要求高和处理器资源有限的情况。将分割结果应用于区域指导的图像插值,能保证较快的处理速度和兴趣区域较好的图像质量。实验结果证明了该方法的有效性。     

基于纹理分析的视差估计算法

针对传统方法难以可靠估计图像中纹理单一像素点视差的问题,提出一种新的基于纹理分析的视差估计算法。与已有方法不同,在以极线约束计算像素点视差时,将极线上纹理单一且近似的像素点合并成直线段,根据连续性和唯一性约束对直线段进行整体匹配,采用直线段的视差得到纹理单一区域的稠密视差图。利用直线段进行整体匹配,提高比较基元包含的信息量,减少扫描范围,从而降低误匹配产生的概率和算法时间复杂度。实验结果表明,该方法能提高纹理单一区域稠密视差图的精度,匹配速度快,具有实用价值。     

Set-membership estimation from poor quality data sets: Modelling ammonia volatilisation in flooded rice systems

A set-membership (bounded-error) estimation approach can handle small and poor quality data sets as it does not require testing of statistical assumptions which is possible only with large informative data sets. Thus, set-membership estimation can be a good tool in the modelling of agri-environmental systems, which typically suffers from limited and poor quality observational data sets. The objectives of the paper are (i) to demonstrate how six parameters in an agri-environmental model, developed to estimate NH₃ volatilisation in flooded rice systems, were estimated based on two data sets using a set-membership approach, and (ii) to compare the set-membership approach with conventional non-linear least-squares methods. Results showed that the set-membership approach is efficient in retrieving feasible parameter-vectors compared with non-linear least-squares methods. The set of feasible parameter-vectors allows the formation of a dispersion matrix of which the eigenvalue decomposition reflects the parameter sensitivity in a region.