MS方法的一个新证明及其结构优化算法

本文给出Ｍｉｌｎｅ－Ｓｉｍｐｓｏｎ（ＭＳ）预测─校正法新的导出方法，并以结构优化思想设计出通用性和可靠性较强的算法。     

倒虹吸管管径计算的迭代法

本文先将倒虹吸管的管径计算公式整理成等式左边只含管径的一次方法，右边含有管径高阶非线性的迭代函数，然后证明该迭代函数收敛，最后利用数学迭代原理给迭代函数右边赋初值，计算左边的管径。继续迭代下去，就能求出倒虹吸管的管径。     

智能混合控制在高速纸机的应用

介绍了压力式网前箱的建模和控制，并通过构造一个新的控制器结构-智能混合控制器，将Fuzzy和PID控制融于其中。     

Application of boundary element method to 3-D problems of coupled thermoelasticity

This paper deals with a new boundary element method for analysis of the quasistatic problems in coupled thermoelasticity. Through some mathematical manipulation of the Navier equation in elasticity, the heat conduction equation is transformed into a simpler form, similar to the uncoupled-type equation with the modified thermal conductivity which shows the coupling effects. This procedure enables us to treat the coupled thermoelastic problems as an uncoupled one, A few examples are computed by the proposed BEM, and the results obtained are compared with the analytical ones available in the literature, whereby the accuracy and versatility of the proposed method are demonstrated.     

步进梁式炉的运动研究

对国内引进的、用于粉末冶金的步进梁式炉的运动,以图解法和解析法进行了分析,并对运动参数进行了理论推导和计算。本研究结果,对解决步进粱式炉的运动故障以及进行新型设计提供了有效的理论分析和计算依据。     

Effects of irradiation in combination with waxing on the essential oils in orange peel

The study evaluated the effects of waxing, irradiation dose and post‐irradiation storage time on the essential oils in orange peel. Mature oranges (Maroc late) waxed or unwaxed were treated with 1 or 2 kGy radiation and stored for 9 weeks at 20 °C and 40–50% RH. Essential oils from the peel were extracted and analysed by GC. Results showed that D ‐limonene was significantly lower in waxed oranges; levels in samples treated with 2 kGy were higher than those in non‐irradiated or treated with 1 kGy. Linalool, methyl anthranilate and 3,7‐dimethyl‐2,6‐octadienal decreased as the dose increased. Levels of linalool increased with storage time but D ‐limonene was unaffected. These results may aid in guaranteeing the quality of orange essential oils during storage time. Copyright © 2004 Society of Chemical Industry     

New approaches for error estimation and adaptivity for 2D potential boundary element methods

This work presents two new error estimation approaches for the BEM applied to 2D potential problems. The first approach involves a local error estimator based on a gradient recovery procedure in which the error function is generated from differences between smoothed and non‐smoothed rates of change of boundary variables in the local tangential direction. The second approach involves the external problem formulation and gives both local and global measures of error, depending on a choice of the external evaluation point. These approaches are post‐processing procedures. Both estimators show consistency with mesh refinement and give similar qualitative results. The error estimator using the gradient recovery approach is more general, as this formulation does not rely on an ‘optimal’ choice of an external parameter. This work presents also the use of a local error estimator in an adaptive mesh refinement procedure. This r‐refinement approach is based on the minimization of the standard deviation of the local error estimate. A non‐linear programming procedure using a feasible‐point method is employed using Lagrange multipliers and a set of active constraints. The optimization procedure produces finer meshes close to a singularity and results that are consistent with the problem physics. Copyright © 2002 John Wiley & Sons, Ltd.     

水文学的研究方法与理论创新

回顾了水文学在其 30 0余年的形成和发展中曾出现过的若干引人入胜、富有启发性、对学科发展起着重要推动作用的研究成果 .论述了“假设”、“猜想”、“推理”、“比拟”、“综合”和“实验”等研究方法的运用在水文学理论创新中的重要作用 .     

Optical analysis of crack tip stress fields: a comparative study

Four optical techniques for evaluating stress intensity factors in opaque specimens are described in outline, and compared for both an artificial crack and a fatigue crack. The results are compared to a standard solution for the geometry considered. All the techniques gave acceptable results over a range of stress levels and crack lengths. The methods of caustics and strain gauges were less good, whilst photoelasticity gave consistent results over a wide range of stress levels. Comments on the ease of application and the resource implications are also made in order to assist practitioners.     

迭加与量化水印嵌入方案的比较及量化参数优化

分别研究了迭加法和量化法的隐蔽性和稳健性，并且提出了量化调制水印方案中的参数优化方法。对两类方法的分析比较表明，迭加法适用于在高频分量嵌入水印，而量化法适用于在低频分量嵌入水印。并以实验验证了这一结论。