相对压强对白炭黑氮吸附表面积测试稳定性的影响

研究相对压强对白炭黑氮吸附表面积测试稳定性的影响。结果表明:在相同液氮纯度、脱气温度、脱气时间、氮吸附点数量条件下,与相对压强范围为0.05~0.1时相比,相对压强范围为0.05~0.2时白炭黑的氮吸附表面积测量值偏低,且差值随氮吸附表面积的增大呈增大趋势;相对压强范围较小时,氮吸附表面积测试结果的线性相关因数较大,再现性较好,测试结果较稳定。     

A replacement of traditional insulation refractory brick by a waste-derived lightweight refractory castable

Lightweight insulation refractories are essential for high-temperature performance to reduce energy consumption. This study investigates a new insulation material, that is, solid waste rice husk ash (RHA) derived lightweight refractory castable, replacing traditional insulation refractory brick. The RHA is generated after the burning of rice husk as biomass fuel. The RHA is used as an aggregate and alkali-extracted silica sol from RHA as a binder to fabricate the insulation castable. The nanosilica containing (~30 wt%) sol is employed to synthesize the refractory castable by varying the sol amount (2.5-12.5 wt% silica from sol). The castable specimens are cast by a vibro-caster and fired at 900-1200°C in a muffle furnace. The physic-mechanical and thermal conductivity (κ) of the castable is investigated. At 1100°C with 10 wt% dry sol retaining sample shows an excellent apparent porosity (~65%), low bulk density (~ 0.8 g/cm³), and κ (0.136 W/m k) with sustainable compressive strength (6 MPa). The acquired results are a good match with the literature (other wastes-derived insulation materials) and industrial (silica insulation brick) obtained data. These promising outcomes may inspire the refractory industries for using RHA as an aggregate and RHA extracted sol as a binder for making insulation castable.     

磷石膏提质降杂实验研究

磷石膏的综合利用对保护环境、促进企业可持续健康发展具有重要意义,但是磷石膏中的磷、氟、二氧化硅等杂质影响其利用。针对云南磷石膏中二氧化硅含量高的问题,采用正浮选工艺开展了磷石膏提质降杂的实验研究。通过单因素条件实验获得了合适的工艺参数：浮选温度为15 ℃、矿浆pH为2、十二胺用量为300 g/t。在此条件下,进行了“一粗二精”的正浮选开路流程实验,获得了二水石膏（CaSO₄·2H₂O）质量分数为97.5%、二氧化硅质量分数为1.17%的精矿,所得精矿达到了GB/T 23456—2018《磷石膏》一级品指标的要求;二水石膏回收率为98.58%、二氧化硅去除率为92.23%。通过正浮选不仅成功实现了二水石膏和二氧化硅的有效分离,而且磷石膏中的水溶磷和水溶氟也得到了有效去除,从而提高了磷石膏的品质。     

Nanocomposites of CsPbBr3 perovskite quantum dots embedded in Gd2O3:Eu3+ hollow spheres for LEDs application

Gd₂O₃:Eu³⁺@CsPbBr₃ quantum dots (QDs) mesoporous hollow nanocomposites with good luminescent properties and high stability were built. Among which, the hollow Gd₂O₃:Eu³⁺ spheres and CsPbBr₃ QDs were prepared by urea homogeneous precipitation and hot-injection method, respectively. Finally, the Gd₂O₃:Eu³⁺@CsPbBr₃ QDs shell–core compounds were constructed through mechanical stirring. The structure, morphology, stability and luminescent properties were studied by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry/thermogravity (DSC/TG), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), photoluminescence excitation/photoluminescence (PLE/PL) and life decay tools. Compared to the original CsPbBr₃ QDs, Gd₂O₃:Eu³⁺@CsPbBr₃ QDs display better photostability, thermal stability and current stability. The resulting Gd₂O₃:Eu³⁺@CsPbBr₃ QDs composite exhibits good yellow emission. The Gd₂O₃:Eu³⁺@CsPbBr₃ QDs mixed silicone resin was directly coated on the blue LED chip, then the w-LED device with the color coordinate of (0.31, 0.32) was successfully assembled. The Gd₂O₃:Eu³⁺@CsPbBr₃ QDs compounds with excellent luminescent properties and stability are expected to be widely used in lighting and display areas.     

电弧炉炼钢碳化硅白渣工艺的脱氧与脱硫

理论计算和实践表明，在电弧炉上采用碳化硅代替硅铁粉和碳粉的白渣还原工艺，可强化钢的脱氧和脱硫效果；提高电炉炼钢生产效率；降低吨钢电耗和生产成本。并指出，采用喷吹技术会进一步改善该工艺的炼钢技术经济效果。     

中频炉酸性炉衬使用寿命的探讨

通过对炉衬材料的选择,作用机理及影响石英砂炉衬材料寿命的相关因素的阐述,说明了SD-T-A石英砂干振料可提高中频炉酸性炉衬使用寿命的原因.     

气相法二氧化硅应用机理及特性

主要介绍了气相法二氧化硅在液态体系、干燥体系、固态体系中的作用机理；气相法二氧化硅在应用中的特殊性能；以及比表面积、pH、含水量、添加量、表面处理程度等气相法二氧化硅各项物理性能对应用性能的影响。     

钛掺杂硅胶块体吸附剂

以陶瓷纤维纸片为基材,顺次经水玻璃、酸性钛盐溶液浸渍共沉淀制得新型陶瓷基钛掺杂硅胶块体吸附剂.多孔介质表面分析显示:掺杂硅胶孔径在0.5～6 nm范围,以中孔为主.Fourier变换红外谱在波数954 cm 1处的特征吸收峰表明吸附剂中形成了Si-O-Ti键.根据掺杂前后固体魔角核磁共振硅谱中硅原子化学位移的变化(向高场方向移动)及X射线光电子能谱中各原子结合能的变化(Ti2p3/2的结合能随钛含量的增加而增加,而Si2p,O1s的结合能则呈相反趋势)进一步表明:钛原子替代硅原子进入硅胶网络.热重分析及烧结实验结果显示:钛掺杂吸附剂具有更好的热稳定性.新型吸附剂优异的吸附性能除了与其高的比表面积相关外,还与Ti-O键对水分子的亲合力紧密相关,其耐热性能增强与形成高热稳定性Ti-O Si键及材料表面导热性能提高有关.     

Synthesis and property of nanosized palladium catalysts protected by chitosan/silica

A chitosan (CTN)/silica‐supported nanosized palladium catalyst was obtained from a silica‐supported chitosan palladium complex through a complex transition method. An adsorption model was employed to simplify the structure of the di‐supporter. It was indicated that when the polymer coil adsorbed on the silica surface with even a monolayer the catalytic activity would reach an optimum value, and different situations of the, nanosized palladium particles would cause a different catalysis. The molar ratio of the chitosan structure unit to the palladium would affect the metal's size, which therefore influenced its catalytic activity. The experimental results corresponded with the inferences. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 989–994, 2002     

模板剂在介孔分子筛合成中的作用机理

以模板法合成分子筛不但能够有效的控制其介观结构,而且环境友好,操作简单,成本低廉,但由于反应在高压釜中进行,模板剂对分子筛合成的作用机理尚未被认清。本文总结了目前提出的可能的模板剂作用机理,并加以分类讨论,以对分子筛合成过程提供指导。