Stabilizing Redox-Active Hexaazatriphenylene in a 2D Conductive Metal–Organic Framework for Improved Lithium Storage Performance

Organic redox-active materials are promising electrode candidates for lithium-ion batteries by virtue of their designable structure and cost-effectiveness. However, their poor electrical conductivity and high solubility in organic electrolytes limit the device's performance and practical applications. Herein, the π-conjugated nitrogen-containing heteroaromatic molecule hexaazatriphenylene (HATN) is strategically embedded with redox-active centers in the skeleton of a Cu-based 2D conductive metal–organic framework (2D c-MOF) to optimize the lithium (Li) storage performance of organic electrodes, which delivers improved specific capacity (763 mAh g⁻¹ at 300 mA g⁻¹), long-term cycling stability (≈90% capacity retention after 600 cycles at 300 mA g⁻¹), and excellent rate performance. The correlation of experimental and computational results confirms that this high Li storage performance derives from the maximum number of active sites (CN sites in the HATN unit and CO sites in the CuO₄ unit), favorable electrical conductivity, and efficient mass transfer channels. This strategy of integrating multiple redox-active moieties into the 2D c-MOF opens up a new avenue for the design of high-performance electrode materials.     

Critical Review of Fluorinated Electrolytes for High-Performance Lithium Metal Batteries

Lithium metal batteries (LMBs), due to their ultra-high energy density, are attracting tremendous attentions. However, their commercial application is severely impeded by poor safety and unsatisfactory cycling stability, which are induced by lithium dendrites, side reactions, and inferior anodic stability. Electrolytes, as the indispensable and necessary components in lithium metal batteries, play a crucial role in regulating the electrochemical performance of LMBs. Recently, the fluorinated electrolytes are widely investigated in high-performance LMBs. Thus, the design strategies of fluorinated electrolytes are thoroughly summarized, including fluorinated salts, fluorinated solvents, and fluorinated additives in LMBs, and insights of the fluorinated components in suppressing lithium dendrites, improving anodic stability and cycling stability. Finally, an outlook with several design strategies and challenges will be proposed for novel fluorinated electrolytes.     

Small Changes,Big Impact: Tungsten Bronzes with Extremely Large Second Harmonic Generation Achieved by the Transition Metal Doping on the B-Site

Two novel transition metal-doped tungsten bronze oxides, Pb_2.15Li_0.85Nb_4.85Ti_0.15O₁₅ (PLNT) and Pb_2.15Li_0.55Nb_4.85W_0.15O₁₅ (PLNW), are synthesized by high-temperature solid-state reactions. The Rietveld method using the high-resolution synchrotron radiation indicates that PLNT and PLNW crystallize in the orthorhombic polar noncentrosymmetric space group, Pmn2₁ (no. 31). As a class of tungsten bronze oxide, PLNT and PLNW retain a unique rigid framework composed of d⁰ transition metal cation (Ti⁴⁺ or W⁶⁺)-doped highly distorted NbO₆ octahedra along with the subsequently generated Pb/LiO₁₂ and PbO₁₅ polyhedra. Interestingly, the d⁰ transition metal-doped tungsten bronzes, PLNT and PLNW, exhibit extremely large second-harmonic generation (SHG) responses of 56 and 67 × KH₂PO₄, respectively. The observed immeasurably strong SHG is mainly attributed to a net polarization originating from the alignment of highly distorted NbO₆ octahedra with doped transition metals in the frameworks. It is believed that doping transition metal cations at the B-site of the tungsten bronze structures should be an innovative strategy to develop novel high-performance nonlinear optical materials.     

Hollow Pd/MOF Nanosphere with Double Shells as Multifunctional Catalyst for Hydrogenation Reaction

A new type of hollow nanostructure featured double metal‐organic frameworks shells with metal nanoparticles (MNPs) is designed and fabricated by the methods of ship in a bottle and bottle around the ship. The nanostructure material, hereinafter denoted as Void@HKUST‐1/Pd@ZIF‐8, is confirmed by the analyses of photograph, transmission electron microscopy, scanning electron microscopy, powder X‐ray diffraction, inductively coupled plasma, and N₂ sorption. It possesses various multifunctionally structural characteristics such as hollow cavity which can improve mass transfer, the adjacent of the inner HKUST‐1 shell to the void which enables the matrix of the shell to host and well disperse MNPs, and an outer ZIF‐8 shell which acts as protective layer against the leaching of MNPs and a sieve to guarantee molecular‐size selectivity. This makes the material eligible candidates for the heterogeneous catalyst. As a proof of concept, the liquid‐phase hydrogenation of olefins with different molecular sizes as a model reaction is employed. It demonstrates the efficient catalytic activity and size‐selectivity of Void@HKUST‐1/Pd@ZIF‐8.     

Atomic Insights into Phase Evolution in Ternary Transition‐Metal Dichalcogenides Nanostructures

Phase engineering through chemical modification can significantly alter the properties of transition‐metal dichalcogenides, and allow the design of many novel electronic, photonic, and optoelectronics devices. The atomic‐scale mechanism underlying such phase engineering is still intensively investigated but elusive. Here, advanced electron microscopy, combined with density functional theory calculations, is used to understand the phase evolution (hexagonal 2H→monoclinic T′→orthorhombic T_d) in chemical vapor deposition grown Mo_{1− x} W _x Te₂ nanostructures. Atomic‐resolution imaging and electron diffraction indicate that Mo_{1− x} W _x Te₂ nanostructures have two phases: the pure monoclinic phase in low W‐concentrated (0 < x ≤ 10 at.%) samples, and the dual phase of the monoclinic and orthorhombic in high W‐concentrated (10 < x < 90 at.%) samples. Such phase coexistence exists with coherent interfaces, mediated by a newly uncovered orthorhombic phase T_d′. T_d′, preserves the centrosymmetry of T′ and provides the possible phase transition path for T′→T_d with low energy state. This work enriches the atomic‐scale understanding of phase evolution and coexistence in multinary compounds, and paves the way for device applications of new transition‐metal dichalcogenides phases and heterostructures.     

Structural and electrical properties of mixed oxides of manganese and vanadium: A new semiconductor oxide thermistor material

Binary oxides of manganese and vanadium have been synthesized by solid state sintering, in which the mass ratio of the individual components Mn₂O₃ and VO₂ have been varied from 90:10 to 5:95. The bulk ceramic samples were characterized by X-ray diffraction and scanning electron microscopy with energy dispersive X-ray analysis. The initial compositions either rich in Mn₂O₃ or in equi-proportion by mass with VO₂ yield β-Mn₂V₂O₇ or a new crystalline form of Mn₂V₂O₇, with unit cell parameters: a = 7.73091 Å, b = 6.640788 Å, c = 6.70779 Å α = γ = 90° and β = 98.7086° which is designated as γ-Mn₂V₂O₇. The compositions, richer in VO₂ produce MnV₂O₆ co-existing with V₂O₅ the proportion of which increases with increase in VO₂. The surface microanalysis shows a spherical-granular morphology in Mn₂V₂O₇ structure and plate/rod-like structures co-existing with granular morphology in case of MnV₂O₆ together with V₂O₅. The electrical parameters of the negative temperature coefficient thermistors were determined. Depending on the constituent oxide composition, the NTC thermistors showed room temperature resistivity in the range of 6.52 × 10² to 6.1 × 10⁶ Ω-cm. The thermistor constant and activation energy are in the range of 0.12–0.458 eV and 1393–4801 K, respectively.     

金属化合物在分子筛上自发分散的研究进展

金属盐和氧化物在分子筛孔穴中及内外表面自发形成原子水平的分散,这种自发分散现象已被多种现代仪器分析所证实，并在国内外得到广泛认同。总结相关文献，结合部分研究工作，对金属化合物在分子筛上自发分散的研究作了综述。     

Machinability of Metal Matrix Composites Reinforced by 3-D Network Structure

Metal matrix composites reinforced by three-dimensional (3-D) continuous network structure reinforcement (3DCNRMMC) are difficult to machine due to serious tool wear and poor surface roughness caused by the brittle and hard reinforcement which interpenetrate into ductile matrix. In order to achieve the approach of low cost of 3DCNRMMC, the machinability of it needs to be understood. The influences of three cutting parameters and volume fraction of reinforcement on cutting force were analyzed in detail. The results indicate that: (1) Due to the brittle phase(s) introduced into ductile matrix of composites, there is a large fluctuation of cutting force causing deterioration of machinability. The fluctuation ranges of cutting forces, initially increase rapidly with the increase of volume fraction of reinforcement and then decrease finally, are largest at the range of the volume fraction of 55–65%; (2) The influence of cutting parameters on cutting force is obvious. With the increases of cutting speed, cutting force decreases gradually unless cutting speed exceeds the value of 209 m/min. Cutting forces increase with increasing feed rate and depth of cut; (3) Owing to the large fluctuation of cutting force, there were some cratered surfaces caused by Si₃N₄ reinforcement pulling-out and flaking-off. Some brittle phase protruding from the machined surface caused the deterioration of machined surface.