Preparation and characterization of metal-complex imprinted PVDF hollow fiber membranes

Using nickel-2,2′-dipyridyl complex as a template, N-vinyl-2-pyrrolidone as the metal coordination functional monomer, and ethylene glycol dimethacrylate as the crosslinker, polyvinylidene fluoride (PVDF) hollow fiber ultrafiltration membrane as the supported membrane, metal complex imprinted polymeric membranes were prepared. The association constant of template-monomer interaction in the prepolymerization solution was estimated to be 4.38 × 10⁴ (L/mol)² by spectrophotometric titration analysis. The attenuated total reflection Fourier transform infrared spectroscopy and scanning electron micrograph characterization indicated that the surface of the support PVDF membrane was completely coated by the imprinted polymer layer after modification. The imprinted membranes exhibited the selective permeability for the template in certain nickel acetate solution. The molecularly imprinted membranes gave higher permeation separation factors at about pH 6, whereas increasing pressure would lower the separation ability. The effects of ion concentration, cations and counterions, ligand selectivity, pH, and trans-membrane pressure were investigated and the permeation performances of the imprinted membranes could be regarded as facilitated transport mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

纳米涂料用金属氧化物粉体材料的开发

介绍了纳米金属氧化物的制作技术，纳米粉末团聚问题的解决以及纳米金属氧化物用于涂料中所引起的神奇功能。同时综述了国内外开发纳米涂料的现状。     

ZPG系列盘式真空过滤机的研制与应用

详细介绍了ZPG系列盘式真空过滤机的主要特点、基本原理和主要技术参数。对盘式真空过滤机的过滤理论进行了系统的研究 ,以及为提高过滤系数和降低滤饼水分所采取的关键措施。与传统的真空过滤机进行了对比 ,表明ZPG系列盘式真空过滤机的滤饼水分可以降低 1 %～ 3 % ,过滤系数提高 3 0 %～5 0 % ,过滤每吨精矿的能耗可以降低 5 0 %左右 ,使得ZPG系列盘式真空过滤机在国内各大冶金矿山得到全面推广使用 ,创造了巨大的经济效益和社会效益。     

瓶级聚酯切片中乙醛含量的控制

对瓶级聚对苯二甲酸乙二酯(PET)原料中的乙醛含量、第三组份(间苯二甲酸)含量、原料比表面积以及工艺参数控制等对产品中乙醛含量的影响进行了讨论，得出了合适的工艺操作条件，并注意到预结晶单元和冷却单元的工艺参数控制对产品乙醛含量的影响最显著，从而为生产乙醛含量小于1．0μg/g的瓶级高粘度PET切片提供了参考。     

二次电池电极基板用复合多孔金属材料的研究

介绍了一种复合金属多孔体的制备及其方法，首先以泡沫塑料为芯膜，经过导电化处理使其具有导电性，其次进行电沉积金属铁，再进行电沉积金属镍，经过热处理后可制备出复合金属多孔体。该复合金属多孔体用铁取代金属镍，其抗拉性能优于单质泡沫镍，同时可以降低制造成本，主要用于载体如电池电极。     

碳铬镍含量对高铬铸铁测温保护管性能的影响

通过高温氧化和高温磨损实验,研究了C、Cr、Ni 3个主要元素对高铬铸铁在高温条件下抗氧化和抗磨损性能的影响。结果表明:Cr含量越高,抗氧化性能和抗磨损性能越好;提高碳含量,明显提高高铬铸铁的高温抗磨性能;当w(Cr)=16％时,加入Ni能提高高铬铸铁的高温抗氧化性能;w(Cr)=30％时,Ni对高铬铸铁的抗氧化性能和抗磨损性能影响不明显.在1100℃以下,选用w(C)=2.8％,w(Cr)=30％、不加Ni的高铬铸铁铸造高温抗磨热电偶保护管,既有较好的使用寿命,又可降低成本.     

Effect of Negative Emotional Content on Working Memory and Long-Term Memory.

In long-term memory, negative information is better remembered than neutral information. Differences in processes important to working memory may contribute to this emotional memory enhancement. To examine the effect that the emotional content of stimuli has on working memory performance, the authors asked participants to perform working memory tasks with negative and neutral stimuli. Task accuracy was unaffected by the emotional content of the stimuli. Reaction times also did not differ for negative relative to neutral words, but on an n-back task using faces, participants were slower to respond to fearful faces than to neutral faces. These results suggest that although emotional content does not have a robust effect on working memory, in some instances emotional salience can impede working memory performance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

多孔粒状铵油炸药在乌海矿业公司的应用

通过对多孔粒状铵油炸药质量影响因素的分析，结合乌海矿业公司爆破的特点，提出了保证炸药加工质量的合理参数。     

硫含量对钴钼型耐硫脱氧剂的脱氧活性影响

研究了工艺气中硫含量对钴钼型耐硫脱氧剂脱氧活性的影响。通过常压微反 -色谱装置测定脱氧剂的本征脱氧活性 ,加压原粒度反应器测定脱氧剂的表观脱氧活性 ,结合实际经验确定了耐硫脱氧剂所需的最低硫含量。还讨论了温度、压力、空速对耐硫脱氧剂脱氧活性的影响。结果表明 ,耐硫脱氧剂完全能满足耐硫变换工艺的要求 ,而且有耐硫变换的作用 ,并对耐硫变换催化剂起到保护作用     

Study on Reduction of Sulfur Content in FCC Gasoline

Reduction of sulfur content in FCC gasoline was studied in a fixed fluid bed (FFB) unit by using metal-modified LV-23 FCC catalyst. The results showed that the sulfur content in FCC gasoline could be reduced with LV-23 catalyst modified with zinc, palladium, zinc-palladium, zinc-cobalt, and zinc-nickel. Among these metals or metal combinations, palladium-containing catalyst was the most effective. Desulfufization of the heavy fraction of FCC gasoline was more effective than full-range gasoline under the same conditions with palladium-containing catalysts. A high reaction temperature was favorable to desulfurization, but it would reduce the yield of liquid product. After desulfurization reaction, the olefm content of product gasoline decreased while the aromatic and iso-alkane contents increased. Removal of thiophene and benzothiophene is higher.