Fatty acid esters with short‐chain alcohols in two‐phase olive pomace oils

Two‐phase decanter olive pomace (TPOP) is the by‐product of a centrifugation system, used to produce olive oil, that separates olive oil and moist pomace. The water content in these olive pomaces is about 70%, while it was 45‐50% in the olive pomace stemming from three‐phase systems (oil, water, and pomace) and 30% in the old press system. The aim of this work is focused on quantification and changes undergone during olive pomace storage in ponds of esters of fatty acids with short‐chain linear alcohols, which can be considered as a refining loss. The results indicate that oil deterioration increases very rapidly, in particular when oil is extracted from the TPOP surface. Special attention should be paid to the storage of TPOP, establishing a maximum of 2 months in all cases.     

Toughening of cycloaliphatic epoxy resins by poly(ethylene phthalate) and related copolyesters

Poly(ethylene phthalate) (PEP) and poly(ethylene phthalate–co‐ethylene terephthalate) were used to improve the brittleness of the cycloaliphatic epoxy resin 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (Celoxide 2021?), cured with methyl hexahydrophthalic anhydride. The aromatic polyesters used were soluble in the epoxy resin without solvents and effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PEP (MW, 7400) led to a 130% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 388–399, 2002; DOI 10.1002/app.10363     

Effect of bentonite on the physical properties and drug‐release behavior of poly(AA‐co‐PEGMEA)/bentonite nanocomposite hydrogels for mucoadhesive

A series of nanocomposite hydrogels for mucoadhesive were prepared from acrylic acid, poly(ethylene glycol) methyl ether acrylate, and intercalated bentonite clay by photopolymerization. The microstructures were identified by X‐ray diffraction (XRD). Results showed that the swelling ratio for the present nanocomposite hydrogels decreased with an increase of bentonite, whereas the gel strength and Young's modulus of the present gels increased with an increase of bentonite. However, the adhesive force of the present gels did not decrease with an increase of bentonite. XRD results indicated that the exfoliation of bentonite was achieved in the xerogels and swollen gels. Finally, the drug‐release behaviors for these gels were also assessed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2934–2941, 2004     

Properties of alkyl esters base on castor oil

Castor oil is a non‐traditional raw material for the preparation of methyl and ethyl esters of higher fatty acids as alternative fuels for diesel engines. Castor oil contains ricinoleic acid (12‐hydroxy octadecene acid) with a major share of about 90%. The article presents the parameters of castor oil‐based methyl esters (COME) and ethyl esters (COEE) defined by the standard EN 14 214. The densities of COME and COEE are higher than the limit defined by the standard EN 14 214. The viscosities are more than twice as high as the limit value. The cetane numbers are lower than defined by the standard EN 14 214. For the remaining parameters, COME and COEE meet, in principle, the standard EN 14 214. The presence of the free hydroxyl group has virtually no effect on the values of such parameters as carbon residue, filterability at low temperatures and oxidation stability, for which some influence was expected. The physicochemical parameters of the castor oil esters are discussed in comparison to the analogous esters of high‐oleic sunflower oil, which contain about 80% of oleic acid. Both the methyl and ethyl esters of high‐oleic sunflower oil meet the standard EN 14 214 in all prescribed parameters.     

Preparation and characterization of novel semi‐interpenetrating 2‐hydroxyethyl methacrylate‐g‐chitosan copolymeric microspheres for sustained release of indomethacin

A novel semi‐interpenetrating (semi‐IPN) graft copolymer of 2‐hydroxyethyl methacrylate (HEMA) with chitosan (CS) has been prepared in the form of microspheres, using water‐in‐oil (W/O) emulsion technique. Microspheres were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X‐ray diffractometry (X‐RD) to confirm the crosslinking and polymorphism of indomethacin (IDM). The X‐RD and DSC techniques indicated a molecular‐level dispersion of IDM in the IPN matrix. Scanning electron micrographs (SEM) taken at the cross section of the microspheres have shown rough surfaces around the microspheres. The sustained release characteristics of the matrices for IDM, an anti‐inflammatory drug, were investigated in pH 7.4 media. Particle size and size distribution of the microspheres were studied by laser light diffraction particle size analyzer. The drug was released in a sustained manner for up to 12 h. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Rheological,mechanical, and morphological studies of epoxy/poly(methyl methacrylate) semi‐interpenetrating polymer networks

Semi‐interpenetrating polymer networks (semi‐IPNs) of epoxy resin and poly(methyl methacrylate) (PMMA) were synthesized. Methyl methacrylate (MMA) was polymerized by free radical mechanism with azo‐bis‐isobutyronitrile in the presence of oligomeric epoxy resin (DGEBA), and hexahydrophthalic anhydride as crosslinking agent. The gelation and vitrification transitions during cure/polymerization processes have been examined using parallel‐plates rheological technique. From differential scanning calorimetry and rheological techniques, it was suggested that both curing and polymerization processes occur simultaneously. However, the gelation time was longer for the semi‐IPN than those observed for the cure of pure DGEBA or polymerization of MMA. The gelation time increased significantly when 5% of MMA was employed, suggesting a diluent effect of the monomer. Higher amount of MMA resulted in a decrease of gel time, probably because of the simultaneous polymerization of MMA during the curing process. Structural examination of the semi‐IPNs, using scanning electron microscopy, revealed phase separation in nanoscale size for semi‐IPNs containing PMMA at concentrations up to 15%. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Chemistry of mandibular and Dufour's gland secretions of ants in genusMyrmecocystus

Males of several species ofMyrmecocystus produce mandibular gland secretions that contain 2,4-dimethyl-2-hexenoic acid and a variety of monoterpenes that include neral, geranial, citronellol, limonene, and 2,6-dimethyl-5-hepten-1-ol. Other components identified include methyl anthranilate, octanal, octanol, octyl octanoate, and 2-hexyl-2-decenal. Methyl salicylate has been identified as a mandibular gland constituent of workers of several species in addition to mellein and monoterpenes such as cymene, limonene, and the isomers of citral. The Dufour's gland secretions of workers and females of 14 species contain typical formicine alkanes (e.g., undecane), 2-alkanols (e.g., 2-tridecanol), and 2-alkanones (e.g., 2-tridecanone). Two species in the subgenusEremnocystus produce secretions that are distinguished by the presence of significant quantities of tridecyl esters. The functions of these compounds as well as their possible chemosystematic significance in the genusMyrmecocystus are discussed.     

Preparation and characterizations of interpenetrating polymer network hydrogels of poly(ethylene oxide) and poly(methyl methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(ethylene oxide) and poly(methyl methacrylate) were prepared by radical polymerization using 2,2‐dimethyl‐2‐phenylacetophenone and ethylene glycol dimethacrylate as initiators and crosslinkers, respectively. The IPN hydrogels were analyzed for sorption behavior at 25°C and at a relative humidity of 95% using dynamic vapor sorption. The IPN hydrogels exhibited a relatively high equilibrium water content in the range of 13–68%. The state of water in the swollen IPN hydrogels was investigated using differential scanning calorimetry. The free water in the hydrogels increased as the hydrophilic content increased. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 258–262, 2003     

Analysis of epoxidized soybean oil by gas chromatography

A fast and cost-effective procedure to quantitate epoxidized soybean oil by means of an external standard method is reported. This procedure is applicable to commercial epoxidized oils, polymer additive packages and polymers—polyvinyl chloride (PVC)—containing epoxidized oils. The epoxidized soybean oil is converted into fatty acid methyl esters with tetramethylammonium hydroxide, and analyzed by capillary gas chromatography with flame-ionization detection. In PVC samples, the epoxidized soybean oil was extracted with toluene and followed by derivatization prior to analysis. The methyl esters of monoepoxyoctadecanoic, diepoxyoctadecanoic and triepoxyoctadecanoic acid were separated with a short capillary column.     

糠醛渣对染料甲基紫的吸附行为

以废弃物糠醛渣为原料制备吸附剂,研究了甲基紫溶液在糠醛渣上的吸附行为,并从热力学和动力学角度探讨了吸附作用机理。吸附平衡模型研究表明,糠醛渣对甲基紫的吸附符合Langmuir与Freundlich型的复合型吸附,即单层吸附和吸附剂表面非均质吸附同时存在;吸附动力学研究表明,糠醛渣对甲基紫的吸附符合准二级吸附动力学方程;热力学参数,ΔG0为-6.667 kJ.mol^-1--8.216kJ.mol^-1、ΔH0为16.866kJ.mol^-1、ΔS0为0.079 kJ.mol^-1.K^-1、为14.753 kJ.mol^-1,说明糠醛渣对甲基紫的吸附是自发进行的、吸热的,且主要为一物理吸附过程。糠醛渣作为吸附剂处理甲基紫废水,是一种有效的方法。该方法实现了以废治废的废物资源化目标,具有良好的社会效益和经济效益.