核壳型聚苯乙烯/聚甲基丙烯酸甲酯复合乳液的制备

以过硫酸铵(APS)为引发剂,用种子乳液聚合方法,合成出以聚苯乙烯(PSt)为核, 聚甲基丙烯酸甲酯(PMMA)为壳的复合乳液。透射电子显微镜观察了核壳复合乳胶粒的形态,光散射粒径分布仪(PCS)测量胶乳粒径大小及其分布。最终成功地制得了核壳型PS/PMMA复合乳液,所得复合乳胶粒粒径大小在60～90nm左右,且单分散性较好。     

Preparation of glycol derivatives of partially hydrogenated soybean oil fatty acids and their potential as lubricants

Glycol diesters and mixtures of mono- and diesters have been prepared from methyl esters of partially hydrogenated soybean oil fatty acids and diethylene, dipropylene, neopentyl and triethylene glycols. The catalyst used in these reactions was a mixture of calcium acetate/barium acetate (3∶1, w/w). The reactions were carried out under nitrogen with 0.5% catalyst at temperatures in the range of 190–275°C. Borated esters of mixed mono- and diesters were prepared with 0.33 equivalent of boric acid per 1.0 equivalent hydroxyl group on the ester. Refractive indices, viscosities, and flash and fire points were determined for diesters, mixed mono- and diesters, and mixed diesters and borated esters. The viscosities, flash points and fire points indicate that these esters can be used as a component of lubricating oils. Wear-prevention characteristics of mixed diesters and borated esters indicated that they can be used as antifriction additives in lubricating oils. Lecture presented at the joint meeting of the International Society for Fat Research and the American Oil Chemists' Society in Toronto, May 10, 1992.     

一步法合成5-甲基海因

以氰化钠、碳酸铵、乙醛等为原料，常压下一步反应得到５甲基海因，总收率７０２％。其最佳操作条件为：反应温度７５℃，反应时间３ｈ，原料碳酸铵与氰化钠之比为２∶１，酸化回流ｐＨ值为２，酸化回流时间２ｈ。     

中国有机硅工业的发展空间

从中国的甲基氯硅烷建设热、金属硅对甲基氯硅烷生产的影响、下游产品的布局和发展、提高企业自主创新能力和知识产权保护意识、加强企业与．研究机构的合作、建立以企业为主体、产学研相结合的技术创新体系等几个侧面对中国有机硅工业的现状、存在问题及发展空间等进行了初步探讨。     

PVC及PMMA在CO_2环境中玻璃化转变特性的研究

对聚合物在CO2环境中的玻璃化转变特性进行了研究。利用蠕变柔量法,在自建的实验装置上,对聚氯乙烯和聚甲基丙烯酸甲酯在CO2环境中不同压力下的玻璃化转变温度进行了测定,并利用间接法测定了对应状态下聚合物中CO2的质量分数。结果表明,在CO2环境中2种材料的玻璃化转变温度显著降低。利用基于经典热力学与统计热力学理论构建的模型,对聚合物中不同的CO2质量分数对应的玻璃化转变温度值进行了计算,得到的计算结果与实验结果较吻合。     

高选择性合成1-甲氧基-2-丙醇固体催化剂的筛选和催化作用

对碱土金属氧化物和两性氧化物等10种氧化物作为合成1 甲氧基 2 丙醇固体催化剂进行了催化性能筛选。发现在碱土金属氧化物MgO、CaO和BaO中,中强碱MgO具有较高的环氧丙烷(PO)转化率(71 07%)和1 甲氧基 2 丙醇(PPM)选择性(92 53%)。在两性氧化物中,ZnO具有较高的PO转化率(55 26%)和PPM选择性(92 37%)。系统考察了反应温度、催化剂用量、反应时间和原料摩尔配比对MgO、ZnO的催化作用特点的影响,发现MgO在催化性能和1 甲氧基 2 丙醇选择性方面表现出的综合性能优于其他催化剂。     

A rapid test to measure performance,emission and wear of a diesel engine fueled with palm oil diesel

Results of performance, emission and tribological evaluations of palm oil methyl ester and its blends with conventional diesel in an automobile diesel engine test bed are presented. Polymerization and carbon deposits on the fuel injector were monitored. CO, CO₂, O₂, combustion efficiency and temperature of exhaust gases were also measured. Palm oil methyl ester and its blends have great potential as alternative diesel fuel. Performance and exhaust gas emission for palm oil methyl ester and its blends with conventional diesel are comparable with those of conventional diesel fuel. Palm oil methyl ester does not pose a severe environmental problem and will not deteriorate engine and bearing components.     

除草剂噻磺隆的合成

报道了以氯甲酸甲酯和2-甲氧羰基-3-氨基磺酰基噻吩为起始原料合成除草剂噻磺隆的方法。原料2-甲氧羰基-3-氨基磺酰基噻吩与氯甲酸甲酯生成2-甲氧羰基-3-甲氧羰基氨基磺酰基噻吩,再与2-氨基-4-甲氧基-6-甲基均三嗪反应生成噻磺隆。避免了异氰酸酯路线的种种缺点,具有收率高、含量高、成本低的特点。以2-甲氧羰基-3-氨基磺酰基噻吩计,总收率为77.73%,原药纯度达93.6%。     

GMA接枝SEBS及其对PA 6的改性及增容

用双螺杆反应挤出法将甲基丙烯酸缩水甘油酯(GMA)接枝到氢化苯乙烯-丁二烯-苯乙烯嵌段共聚物(SEBS)上(即SEBS-g-GMA)，研究引发剂过氧化二异丙苯用量、活性单体GMA用量对接枝率的影响；通过双螺杆挤出、共混，制备聚酰胺(PA)6／SEBS-g-GMA、PA 6／SEBS-g-GMA／SEBS合金，研究SEBS-g-GMA对合金体系的相容性影响及增韧作用，探讨了合金体系的形态结构和力学性能。     

Surface morphology control of immiscible polymer-blend thin films

The effects of the molecular weights (molecular weight of polystyrene, M_w,PS, varying from 2.9 to 129 k) on the surface morphologies of spin-coated and annealed polystyrene/poly (methyl methacrylate) (PS/PMMA=50/50, w/w) blend films were investigated by atomic force microscopy and X-ray photoelectron spectroscopy. For the spin-coated films, when the M_w,PS varied from 2.9 to 129 k, three different kinds of surface morphologies (a nanophase-separated morphology, a PMMA cellular or network-like morphology whose meshes filled with PS, a sea-island like morphology) were observed and their formation mechanisms are discussed, respectively. Upon annealing, two different morphology-evolution processes were observed. It is found that a upper PS-rich phase layer is formed when M_w,PS<4 k, and this behavior is mainly attributed to the low interfacial tension between PS and PMMA component. When M_w,PS>4 k, the PS-rich phase forms droplets on top of the PMMA-rich phase layer which wets the SiO_x substrate. These results indicate that the surface morphology of the polymer blend films can be controlled by the polymer molecular weight and annealing conditions.