桐酐与甲基四氢苯酐复合固化环氧体系的性能

研究了不同配比的环氧树脂618/桐酸甲酯酸酐(MeMA)/甲基四氢苯酐(MeTHPA)固化物的固化行为。测定了固化物热变形温度、拉伸强度、弯曲强度、冲击强度及体积电阻等,解析了体系固化前后的红外光谱。结果表明:混合酸酐固化剂中MeTHPA与MeMA的配比为9∶1时,与618环氧树脂固化所得的产物综合性能最佳。2 000 h人工加速老化后其力学性能未见下降。     

Grafting kinetics of poly(methyl methacrylate) on microparticulate silica

Grafting of poly(methyl methacrylate) (PMMA) on microparticulate silica was achieved by initiating the polymerization of MMA by 4,4′-azobis(4-cyanopentanoic acid) that was covalently bound to the silica surface. The initiator seems to be destabilized upon binding it to the silica surface. The kinetics of the graft polymerization are described and are largely affected by the Trommsdorff effect, which makes it possible to graft a high amount of PMMA on silica.     

异丁烯两段法制甲基丙烯酸甲酯

将异丁烯三步法制甲基丙烯酸甲酯简化为两段法,异丁烯首先被氧化到甲基丙烯醛(MAL),再将甲基丙烯醛氧化到甲基丙烯酸和酯化为甲基丙烯酸甲酯(MMA)的反应合并为一步进行,缩短了工艺流程,提高了产率。第一段用共沉淀法制备含有镧系元素La的MoBiFeCoSbLaCsO催化剂,氧化反应在固定床反应器中进行。反应温度365℃,原料气n〔i(C4H8)〕∶n(O2)∶n(N2)=6∶19∶75,空速1800h-1。异丁烯转化率为93 8%;生成MAL的选择性为88 9%。第二段反应的催化剂为Pd5Pb2FeLa,反应温度为70℃,空气流速为100mL min。MAL转化率为89 2%;生成MMA的选择性为92 3%。     

STUDY OF THE PARAMETERS CONTROLLING THE ALTERNATING COPOLYMERIZATION OF METHYL METHACRYLATE AND STYRENE

The copolymerization of methyl methacrylate and styrene, in the presence of zinc chloride, was conducted in the aqueous phase. The zinc chloride acting as a complexing agent

Among the factors affecting the polymerization yield, we have; the level of complexing agents, the monomer ratio and the temperature

The polymers were characterized for their molecular weight (G.P.C.) and analyzed by N.MR, and D.T.A

A model taking into account the various parameters is proposed.     

Polyisobutene/polycyclohexyl methacrylate interpenetrating polymer networks

Interpenetrating polymer networks (IPNs) combining polyisobutene (PIB) and poly(cyclohexyl methacrylate) (PCHMA) networks were prepared using an in situ strategy. PIB networks were formed by alcohol-isocyanate addition between the hydroxyl end groups of telechelic dihydroxypolyisobutene and an isocyanate cross-linker, catalyzed by dibutyltindilaurate (DBTDL). PCHMA networks were obtained from free-radical copolymerization of cyclohexyl methacrylate (CHMA) with ethylene glycol bismethacrylate (EGDM) in the presence of dicyclohexyl peroxydicarbonate (DCPD) as the initiator. The network formations into the IPN architecture were followed by FTIR spectroscopy. In a large composition range, transparent IPNs exhibit two mechanical relaxation temperatures as determined by dynamic mechanical thermal analysis (DMTA), corresponding to those of a PIB enriched phase and of one interpenetrating phase containing the PCHMA network. This morphology was confirmed by IPN surface analysis by AFM. As expected, mechanical properties of PIB networks are improved by the presence of PCHMA network in such IPN architectures.     

Effect of compatibility of cellulose acetate/poly(vinyl butyral) blends on pervaporation behavior of their membranes for methanol/methyl tert‐butyl ether mixture

Binary blends and their blend membranes of cellulose acetate (CA) and poly(vinyl butyral) (PVB) are prepared by solution blending. The compatibility of the blends is studied by viscometry and Fourier transform IR. It is found that the incompatibility of the blends is markedly manifested when the weight fraction of PVB in the CA/PVB blends (W_PVB) is located at higher regions. On the other hand, compatibility is obtained for the CA/PVB blends with lower W_PVB values, especially at about 0.2. This compatibility is believed to play a key role in the good pervaporation behavior of CA/PVB blend membranes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2434–2439, 2002     

3-正丙基-5-羧基-1-甲基吡唑的合成研究

以 2 -戊酮和草酸二乙酯为起始原料 ,经 Claisen缩合、环化、甲基化和皂化等反应制得目标化合物 3-正丙基 - 5 -羧基 - 1 -甲基吡唑 3。文献报道的合成方法为四步法 ,在此基础上加以改进 ,形成了两种新的合成路线 ,即三步法和两步法 ,其收率均高于四步法 ,高出 2 7.0 %     

氟氯苯乙酮生产污染物的处理方案

对氟氯苯乙酮生产过程中产生的污染物情况进行了分析，并对其提出了治理方案。     

长效家庭粮食储藏剂

本文提出一种家庭用防治储粮害虫的复配型杀虫剂。该药剂能放出Ｈ３Ｐ和ＣＨ３Ｂｒ混合气体，持效６个月。杀虫、杀菌、驱鼠效果明显，对人畜无害，且粮垛不需密封，取粮方便。     

PS/PMMA共混体系的挤出流变行为

利用单螺杆挤出机,配备特殊设计的狭缝模头,在不改变螺杆转速的情况下获得流经口模的不同流量,研究了聚苯乙烯(PS)/聚甲基丙烯酸甲酯(PMMA)共混体系的挤出流变行为。结果表明,PS/PMMA共混物熔体的流变行为和其组分熔体的流变行为类似,都表现出假塑性流体的流动行为;在所研究的组成范围内,共混物熔体的非牛顿指数低于任一组分熔体。随着共混物黏度比的减小,其熔体的非牛顿指数呈下降的趋势;共混物熔体的黏度对加和性法则皆表现为负偏差,表明在界面处具有弱的相互作用。