Ag/CeO2-ZnO催化剂上甲醇部分氧化制氢气研究

研究了用于甲醇部分氧化制氢气反应的Ag/CeO2-ZnO催化剂的制备条件以及反应条件对催化剂性能的影响.Ag/CeO2-ZnO催化剂中银含量、焙烧温度、反应温度以及反应气的比例等对催化剂性能具有很大的影响.Ag/CeO2-ZnO催化剂的制备条件以及反应条件控制在一定范围内时,Ag/CeO2-ZnO催化剂对甲醇部分氧化制氢气具有很高的催化活性与选择性.     

甲型肝炎病毒(L-A-1株)基因型分析

目的 分析甲肝病毒基因型,为确定我国甲肝的分子流行病学及疫苗的安全性和免疫原性奠定基础。方法 采用抗原捕获聚合酶链反应（AC/PCR）,依据国际上甲肝病毒分型标准,扩增VP1/2A结合处的168个核苦酸（nt2909～3264）。结果 经生物信息学软件分析,得出L-A-1株病毒属于甲肝病毒基因IB亚型。结论 在我国有IA和IB两个亚型甲肝病毒流行。     

Mechanistic Insight in the Ethane Dehydrogenation Reaction over Cr/Al2O3 Catalysts

A Cr/Al₂O₃ alkane dehydrogenation catalyst exhibits a maximum in ethylene yield during an ethane dehydrogenation cycle. Isotopic labelling experiments with monolabelled ¹³C-ethane and deuterium were used to elucidate whether the initial activity increase could be due to formation of an active, larger hydrocarbon intermediate on the surface. The results strongly indicate that this is not the case, and instead point to a traditional reaction cycle involving adsorption of ethane to form an ethyl species, followed by desorption of ethene and hydrogen. Transient kinetic data suggest that ethane adsorption is the rate-determining step of reaction.     

BaTiO_3粉体中Ti/Ba比分析方法的比较

提出了用ＫＯＨ熔融分解ＢａＴｉＯ３粉体〔１〕，再用浓ＨＣｌ酸化后，用感应耦合等离子体发射光谱法（ＩＣＰ—ＡＥＳ法）测定试样中的Ｔｉ／Ｂａ比，并与化学分析法的结果作了比较，显示出ＩＣＰ—ＡＥＳ法简便，快速，结果更好。     

Squaring down of general MIMO systems to invertible uniform rank systems via pre- and/or post-compensators

Pre- and/or post-compensators are designed to square down a general MIMO system to a uniform rank system, the structure of which is almost similar to a SISO system. The method of squaring down either does not change the finite zero structure of the given MIMO system or simply adds additional finite zeros in the left half s-plane. The significance of such a squaring down lies in the simplicity of the structure of a uniform rank system lending itself for easy analysis and control design.     

PP/WSPET/ZnO三元共混合金的流变性研究

用CFT-500型毛细管流变仪研究了PP/WSPET/ZnO共混体系的流变性能。研究结果表明:PP/WSPET/ZnO共混合金为典型的假塑性流体,WSPET含量增加,流体产生不稳定流动的临界剪切速率增大。共混合金的表观黏度和零切黏度随WSPET含量和温度提高而减小。黏度对温度的依赖性随WSPET含量增加和剪切速率的增大而减小。     

三箱式纺丝技术生产PET/PA6复合纤维

介绍了采用三箱式纺丝技术生产PET/PA6复合纤维的设备及工艺。重点对纺丝箱体、纺丝温度控制进行了详细的讨论。     

纳米TiO2复合铁钛防锈颜料的研制及产业化进展

介绍了纳米TiO2复合铁钛防锈颜料的制备原理、工艺、技术指标;描述了铁钛防锈涂料的配方、性能检验和产业化进展情况.     

Comparison of the Effect of a Hydrocarbon Oil and a Terpene Tackifier on the Autohesion of Styrene-Butadiene Rubber

Blends of uncrosslinked styrene-butadiene rubber (SBR) with a terpene tackifier resin or a naphthenic oil have been characterized, and their autohesion and cohesion determined using a T-peel geometry. SBR/oil blends are homogeneous at all proportions, while SBR/resin blends, based on DSC and DMA analysis, undergo bulk phase separation at about 50% resin. However, migration of tackifier to the surface region is proposed at much lower resin contents. Compositions diluted with oil have autohesion similar to the neat SBR. This is attributed to compensating effects; although oil hastens self-bond formation by increasing chain mobility, this is nearly equally balanced by more facile chain separation during bond rupture. In short, oil-diluted compositions are soft and weak. On the other hand, SBR compositions containing small amounts of resin have high autohesion. Resin-diluted specimens deform easily at low strain, just as those containing oil, but intertwined chains of the former have greater resistance to separation, due at least in part to higher glass transition temperatures. It is proposed that autohesion is further enhanced by migration of tackifier to the surface. This causes SBR/resin compositions to be both soft and strong-a necessary condition for high autohesion.