探讨数字化校园背景下的“微门户”建设构想--基于福建电力职业技术学院的数字化校园建设

该文分析了高职院校数字化校园建设的具体问题,借助“微门户”的概念,提出了数字化校园背景下的“微门户”建设构想,为高职院校数字化校园建设提供了一条有效的建设思路。     

微媒体环境下大学生移动学习探究

以微信、微博为代表的微媒体迅速普及,悄然影响着大学生的生活和学习,教师如何借助这些新型媒体引导大学生更好地移动学习值得我们探究,本研究通过问卷调查和分析,对在微媒体环境下开展大学生移动学习提出了若干建议,为相关教师提供借鉴。     

聚砚基纤维素填充复合超滤膜材料的研究

以聚砜为原材料,通过向铸膜液中混入纤维素微纳晶体,采用浸没沉淀相转化工艺制备了纤维素填充聚砜基复合超滤膜材料。测定了超滤膜的水通量、截留率、平均孔径、孔隙率等性能,通过单因素影响试验分析了各个工艺因素对产品性能的影响;考察了膜的化学稳定性以及运行压力对性能的影响;通过扫描电镜观察了膜孔的结构;并通过浊点滴定实验得到膜液的三元相图,分析了纤维素的加入对成膜过程的影响。     

受损眼眶中视神经受力的有限元模拟

利用CT对受伤的人头颅进行扫描,得到头颅的CT图像资料,将图像导入Mimics软件(试用版)中,建立了带有组织的受损眼眶的3D模型,模型中包括视神经、眼球、眶脂体、眼眶.将此模型导入ANSYS软件中,并建立有限元模型进行分析计算.有限元模拟结果表明:在正常颅内压和眼内压的作用下,视神经的最大应力发生在视神经与眼球接触部位.     

Low-Power Operational Amplifier for Real-Time Signal Processing System of Micro Air Vehicle

A low-power complementary metal oxide semiconductor(CMOS) operational amplifier (op-amp) for real-time signal processing of micro air vehicle (MAV) is designed in this paper. Traditional folded cascode architecture with positive channel metal oxide semiconductor(PMOS) differential input transistors and sub-threshold technology are applied under the low supply voltage. Simulation results show that this amplifier has significantly low power, while maintaining almost the same gain, bandwidth and other key performances. The power required is only 0.12mW, which is applicable to low-power and low-voltage real-time signal acquisition and processing system.     

Sintering technology for micro heat pipe with sintered wick

In order to study reasonable sintering technological parameters and appropriate copper powder size range of micro heat pipe (MHP) with the sintered wick, the forming principle of copper powders in wicks and MHP’s heat transfer capabilities were first analyzed, then copper powders with different cell sizes and dispersions were sintered in RXL-12-11 resistance furnace under the protection of the hydrogen at different sintering temperatures for different durations of sintering time, and finally the sintered wicks’ scanning electron microscope (SEM) images and their heat transfer capabilities were analyzed. The results indicate that the wick sintered with copper powders of larger cell size or smaller size range has better sintering properties and larger heat transfer capabilities; and that the increase of either sintering temperatures or sintering time also helps to improve the wick’s sintering properties and heat transfer capabilities, and the former affects more obviously than the latter. Considering both its manufacturing cost and performance requirements, it is recommended that copper powders with the size range of 140–170 μm are sintered at 900–950°C for 30–60 min in practical manufacturing. In addition, two approaches to improve wick’s porosity are also proposed through theoretical analysis, which suggests that the larger the wick’s porosity, the better the heat transfer capabilities of the MHP.     

微槽群散热器换热性能实验研究

对微槽群相变散热器的散热性能进行了实验研究,实验采用了混合工质2-Methylpentane和甲醇来强化系统的换热性能,当混合工质中x_1(2-Methylpentane)的摩尔分数为10%,x_2(甲醇)的摩尔分数为90%时,微槽群散热器的换热性能最优;将该种配比的混合工质分别应用于不同尺寸的微槽群相变散热器中,得出了优化的微槽群深宽尺寸比.实验结果表明,在同一散热热流密度下,与前人的工作相比,能使芯片表面温度降低10～20℃.其散热性能满足大功率高性能电子芯片的散热需求.     

医学CT断层图像三维重建的Matlab实现方法

介绍了运用Matlab软件进行CT断层图像的三维重建的原理及实现方法。运用计算机图形学和图像处理技术将计算机断层扫描（CT）等成像设备得到的人体断层二维图像序列,在计算机中重建成三维图像数据,并在屏幕上形象逼真地显示人体器官的立体视图。可以对重构出的器官图像进行诸如旋转、缩放等操作,重建方法简单,显示效果良好。     

微悬臂梁制作中的牺牲层释放工艺研究

探讨了微悬臂梁的制作中的牺牲层释放工艺,针对FPA结构中微悬臂梁的结构层和牺牲层材料的选择和制作方法,从释放机理的角度对磷硅玻璃腐蚀速率等释放关键技术作了研究,给出了相应的加工参数。     

基于多项式拟合的CT图像环状伪影校正

探测器探元的响应不一致性会使CT图像中出现环状伪影,环状伪影是影响CT图像像质的重要因素,影响图像的分析及后续处理。为此提出一种基于分段多项式拟合的环状伪影校正方法,该方法适用于单材质或图像中的材质衰减系数相差不大的情况。采用分段多项式拟合正弦图累加曲线得到修正因子,用修正因子修正不一致的探元,最后重建图像。实验结果证明此方法能有效抑制图像正中间部分环状伪影。