THE STRUCTURE CONTROL OF ALUMINUM FOAMS PRODUCED BY POWDER COMPACTED FOAMING PROCESS

A new technique, powder compact foaming process for the production of aluminum foams has been studied in this article. According to this method, the aluminum powder is mixed with a powder foaming agent (Till2). Subsequent to mixing, the powder blend is hot compacted to obtain a dense semi-finished product. Upon heating to temperatures within the range of the melting point, the foaming agent decomposes to evolve gas and the semi-finished product expands into a porous cellular aluminum. Foaming process is the key in this method. Based on experiments, the foaming characteristics were mainly analyzed and discussed. Experiments show that the aluminum-foam with closed pores and a uniform cell structure of high porosity can be obtained using this method by adjusting the foaming parameters: the content of foaming agent and foaming temperature.     

用铸造废砂制备磷酸盐泡沫陶瓷的研究

以经过活化处理后的铸造废砂为主要原料，以磷酸和磷酸盐为发泡固化剂，再配以必要的添加剂，通过混合搅拌、浇注成型、烧结强化工艺制造的磷酸盐泡沫陶瓷具有高强和多孔特征。研究表明：影响材料性能的主要因素有废砂活性、磷酸、添加剂、烧结工艺以及混合料中的铝硅比等。技术经济分析表明了这项工艺技术具有废物利用量大．生产过程简单，产品用途广泛，对铸造行业的废弃物资源化具有积极意义。     

N490(DI)柴油机气缸盖消失模铸造生产工艺

通过一典型产品的消失模铸造生产工艺，系统地阐述了复杂型消失模铸造产品研发的一般性工作程序。借助CAD／CAM一体化技术手段，缩短了研发周期，稳定了产品质量，实现了复杂型消失模产品模具的国产化，丰富和发展了消失模铸造生产技术。     

消失模铸造充型过程的模拟方法

通过分析消失模铸造充型过程的特点，提出了一种消失模铸造充型过程的计算模型，并用人工神经网络算法计算了充型过程中不同时刻液态金属-模样界面的位置．模拟计算结果与实际测试结果无论在充型形态还是充型时间上都符合得较好．     

铸铁件消失模充型速度的测试及计算

使用计算机数据采集系统测试了铸件消失模充型过程中负压度、模样密度、浇注温度、金属静压头等工艺因素对充型速度的影响规律。通过多元线性回归，给出了充型速度的经验计算公式，并对公式进行了验证。     

On the issue of urea phase connectivity in formulations based on molded flexible polyurethane foams

Lithium chloride was added to systematically alter the phase separation behavior, and hence, the nature of urea phase connectivity, in a series of plaques based on molded flexible polyurethane foam formulations. The plaques prepared were found to possess varied levels of urea phase connectivity that was examined at different length scales using several characterization techniques. SAXS, TEM, and t‐AFM were used to show that addition of LiCl systematically reduced the formation of the urea aggregate structures typically observed in flexible polyurethane foam formulations and thus led to a loss in urea phase connectivity at the macrolevel. SAXS, DSC, and DMA revealed that formulations with and without LiCl exhibited similar interdomain spacings and soft segment glass transitions, suggesting that incorporation of LiCl did not prevent the plaques from undergoing partial microphase separation. WAXS demonstrated that addition of LiCl led to a loss in the local ordering of the hard segments within the microdomains, i.e., it led to a reduction of microlevel connectivity or the regularity in segmental packing of the urea phase. High‐magnification t‐AFM images showed that increasing the LiCl content dispersed the urea component more homogeneously and in a more uniform manner in the polyol matrix, and thus altered the connectivity of the urea phase at the microdomain level. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2956–2967, 2002     

铵盐体系香波泡沫性能的研究

研究了两种铵盐型阴离子表面活性剂与烷基单乙醇酰胺、烷基二乙醇酰胺等复配体系在不同水硬度条件下的泡沫性能 ;考察了乳化硅油、羊毛脂、十八醇、珠光剂、香精、阳离子表面活性剂及聚合阳离子化合物等添加剂在香波体系中不同水硬度条件下对发泡性能的影响。实验条件下所有体系的稳泡性均较好 ,LSA与AESA复配后泡沫力增大 ,其中AE SA含量需 <1 0 % ;含烷基单乙醇酰胺香波体系的泡沫性能优于含烷基二乙醇酰胺的 ;羊毛脂和乳化硅油对香波泡沫的影响较大 ,而其它添加剂对香波泡沫的影响不大。     

冰箱用聚氨酯泡沫塑料的密度分布机理及配方优化

对冰箱用聚氨酯泡沫塑料的密度分布机理进行了探讨,为配方和工艺优化提供了有价值的参考,并通过对密度分布的研究来解决冰箱泡沫的其他性能缺陷。