冷却速度对激光相变组织分布的影响

提出通过改变边界换热条件，从而改变冷却速度，达到控制激光相变硬化。实验和计算结果的比较表明，这种控制相变及其组织分布的方法能够处理激光淬火难以解决的问题。     

紧凑 Tokamak(球形环)聚变堆第一壁及中心导体柱上中子负荷及核热计算与分析

采用通用蒙特卡罗粒子输运程序ＭＣＮＰ／３８计算低环径比Ｔｏｋａｍａｋ（紧凑环或球形环）聚变堆第一壁及中心导体上的中子壁负荷分布和核热沉积分布，并与常规Ｔｏｋａｍａｋ堆第一壁上中子壁负荷分布和核热沉积分布进行比较、分析。结果表明，在中子壁负荷归一化为１ＭＷ／ｍ２时，与常规Ｔｏｋａｍａｋ相比，在低环径比Ｔｏｋａｍａｋ堆第一壁及中心柱表面上中子壁负荷分布峰值并不比常规Ｔｏｋａｍａｋ堆第一壁上的峰值高，而且低于低环径比Ｔｏｋａｍａｋ堆整个第一壁上的平均值，而中心柱上的核热沉积峰值稍高于常规Ｔｏｋａｍａｋ堆第一壁上的核热沉积峰值，但对较高中子壁负荷情况，中心导体柱上的核热沉积和辐照损伤仍可能是比较严重和值得特别研究的问题。     

溶胶－凝胶二氧化硅驻极体薄膜的物理化学改性

实验研究了由溶胶－凝胶法制备二氧化硅驻极体薄膜的工艺。用红外透射谱、扫描电子显微镜以及驻极体等温表面电位测量和热刺激放电等实验考察了热处理和化学表面修正两个关键工艺对溶胶－凝胶二氧化硅样品驻极体性能的影响。结果表明经过高温条件下一定时间的热处理和化学表面修正，可以制备出性能优良的驻极体薄膜     

热电厂锅炉运行技术指标的微机管理

本文从锅炉运行技术指标台帐微机管理的实际出发，提出了热量计算中主蒸汽流量修正系数Ｃ和给水焓值Ｚ两项参数回归的计算公式，提高了热量计算数值精度。     

Photovoltaic-integrated building facades

Photovoltaic (PV) cells, when integrated within a building facade, offer the possibility of generating electric power and heat for local use or export. This paper reports on a project to investigate the practical operational efficiencies that might be delivered from such facades. The results from laboratory experiments and computer simulations are presented: the former were used to develop an empirical relationship between cell temperature and power output; the latter were undertaken to assess operational efficiencies under a range of climate conditions representative of the UK.     

Development of materials database system for cae system of heat treatment based on data mining technology

Computer simulation for materials processing needs of materials. In order to employ the accumulated large data on a huge database containing a great deal of various physical properties materials heat treatment in the past years, it is significant to develop an intelligent database system. Based on the data mining technology for data analysis, an intelligent database web tool system of computer simulation for heat treatment process named as IndBASEweb-HT was built up. The architecture and the arithmetic of this system as well as its application were introduced.     

Expressing the equivalence of non‐isothermal and isothermal heat sterilization processes

Currently, the sterility of heat‐processed food and pharmaceuticals is assessed in terms of an F₀ value, based on the equivalence of the heat treatment to an isothermal process at a reference temperature. This F₀ value, however, has a meaning if, and only if, the inactivation kinetics of the targeted spores (or cells) follow a first‐order relationship and the temperature dependence of the D value, the reciprocal of the rate constant, is log‐linear. There is growing evidence that these conditions are not satisfied by many spores, including those of Clostridium botulinum and vegetative cells. Consequently, a replacement for the F₀ value is proposed in the form of a momentary equivalent time at the reference temperature based on the actual survival pattern of the spores, which need not be log‐linear. This equivalent time can be calculated together with the theoretical survival ratio in real time, thus enabling an operator to monitor the lethality of ongoing industrial heat processes. The concept is demonstrated with published survival data of C. botulinum, for which the Weibullian and log‐logistic models served as primary and secondary models, respectively. The safety factor according to the proposed method is in the number of added minutes of processing, beyond the theoretical time needed to reduce the survival ratio of the targeted spores or cells to a level that would produce practical (or commercial) sterility. Copyright © 2006 Society of Chemical Industry     

Sound-velocity measurements for HFC-134a and HFC-152a with a spherical resonator

A spherical acoustic resonator was developed for measuring sound velocities in the gaseous phase and ideal-gas specific heats for new refrigerants. The radius of the spherical resonator, being about 5 cm, was determined by measuring sound velocities in gaseous argon at temperatures from 273 to 348 K and pressures up to 240 kPa. The measurements of 23 sound velocities in gaseous HFC-134a (1,1,1,2-tetrafluoroethane) at temperatures of 273 and 298 K and pressures from 10 to 250 kPa agree well with the measurements of Goodwin and Moldover. In addition, 92 sound velocities in gaseous HFC-152a (1,1-difluoroethane) with an accuracy of ±0.01% were measured at temperatures from 273 to 348 K and pressures up to 250 kPa. The ideal-gas specific heats as well as the second acoustic virial coefficients have been obtained for both these important alternative refrigerants. The second virial coefficients for HFC-152a derived from the present sound velocity measurements agree extremely well with the reported second virial coefficient values obtained with a Burnett apparatus.Paper dedicated to Professor Joseph Kestin.