A new method for the determination of wax precipitation from non-diluted crude oils by fractional precipitation

Wax precipitation is one of the most important flow assurance problems. Unfortunately, experimental data are very scarce to confirm existing models for prediction of such precipitation problem. This work reports a new experimental method. Multistage fractional wax precipitation was carried out by decreasing the temperature of crude oil. No solvent dilution was used, so the effect of solvent on temperature wax precipitation was avoided. The reproducibility of the method was tested with comparable results. The precipitation curve and the wax appearance temperature were obtained for two crude oils with different chemical nature using the reported method.     

On the microhardness testing of electrically stressed poly(phenylene oxide): Polystyrene blends

Microhardness measurements have been performed on untreated (virgin) and electrically stressed, solvent‐cast laboratory‐prepared samples of pure poly(phenylene oxide) (PPO), pure polystyrene (PS), and PPO : PS polyblends with different weight proportions. Results of such measurement on untreated polyblend sample show that microhardness (H_v) increases with increase in the content of PS up to 10 wt %, which attributed to the existence of homogeneous phase morphology. However, this feature is not observable in samples containing higher content of PS. Electrical stress is found to modify considerably the mechanical property of polymer. The effect of electric field on the microhardness of such samples (PPO : PS :: 90 : 10) has been characterized by the existence of a peak. Trapping of charge carriers in electrically stressed samples imparts hardening to the polyblend up to an applied step field of 190 kV/cm. However, the excessive charging beyond this step field value destroys this characteristic. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

不锈钢热轧浊环水处理工艺设计

介绍了宝钢集团上海五钢不锈钢长型材热轧工程浊循环水处理的工艺设计，探讨了采用化学除油工艺、自动反清洗过滤器等技术和设备，处理不锈钢热轧浊环水的技术特点。     

从混联法生产中提取镓的研究

针对联合法厂家资源的分布特点,提出采用化学法和树脂吸附法相结合的方式实现同时回收烧结法和拜尔法循环母液中镓的新工艺,并通过小试和扩试结果分析,阐述了该工艺的可行性。     

高压静电除垢技术在发电厂汽轮机凝汽器中的应用

汽轮机凝汽器的除垢问题通常采用化学方法或物理方法,这些除垢措施有一定的局限性。介绍了一种利用高压静电除垢技术。     

微波辐射在提金活性炭技术中的应用

概述了微波辐射在提金活性发技术中的应用，将微波辐射和传统方法制备提金炭技术进行了比较，论述了微波辐射在制备提金炭及其解吸技术中的研究进展，最后对微波辐射在提金活性炭技术中的应用作了简单的展望。     

三(明)钢烧结厂电除尘灰的气力输送

三钢烧结厂130m^2烧结机电除尘输灰首次采用了气力输送系统。该系统由气源、输送、管路、灰库及控制五部分组成，本文介绍了系统的工作原理及运行调试情况。系统投产后，运行平稳，达到了设计要求。     

Si相的析出状态对Al—Si合金性能的影响

控制Si相的析出状态,会对Al-Si(1wt％)合金的性能产生不同的影响。本文阐述通过不同的热处理工艺改变了Al-Si(1wt％)合金的机械、物理性能,获得了高形变强化率、高塑性变形能力、高拉伸强度的工艺,还讨论了具有上述高拉伸强度的微细丝在半导体器件应用中所具有的优越性。     

Perceptually Grounded Language Learning: Part 2—DETE: A Neural/Procedural Model

In Part 1 of this two-part series, we introduced Katamic memory—a neural network architecture capable of robust sequence learning and recognition. In Part 2, we introduce the Blobs World taskjdomain for language learning and describe the DETE language learning system, which is composed of over 50 Katamic memory modules. DETE currently learns small subsets of English and Spanish via association with perceptual! motor inputs. In addition to Kaiamic memory, DETE employs several other novel features: (1) use of feature planes, to encode visual shapes, spatial relationships and the motions of objects, (2) phase-locking of neural firing, in order to represent focus of atention and to bind objects across multiple feature planes, and (3) a method for encoding temporal relationships, so that DETE can learn utterances involving the immediate past and future. We compare DETE to related models and discuss the implications of this approach for language-learning research.     

JDZ-1型固态存储雨量器降水量误差成因分析

对JDZ-1型固态存储雨量器与虹吸自记雨量计平行观测资料进行了系统分析,分析了两者存在误差的影响因素。对JDZ-1型固态存储雨量器在北方地区使用过程中存在的问题提出了解决方法,以保证和提高JDZ-1型固态存储雨量器资料质量。